The ironware I made shines

Chapter 555
Huanong 01 cannot reach the high-end version, and the special design concept cannot be implemented. The main reason is that the Shennong 01 diesel engine system is not enough. Therefore, during this period, Huafeng is also stepping up research on the second-generation mass-produced Shennong 02 engine, coupled with Ge Xiaohua’s research Experience, Shennong 02 diesel engine is also under intense research.

Huafeng has a relatively complete and advanced research base in China, and has many achievements in technology research and development. Therefore, even if it does not produce cars, its position in the automotive field is still unshakable. Concentrate on technology. Although consumers do not know it, people in the industry But it is very clear that after all, the three core technologies are now in the hands of Huafeng. Instead of begging grandpa and grandma with foreign car companies, it is better to share technology with domestic companies and jointly improve the core competitiveness of independent brand cars.

When Ge Xiaohua drove to the county town to buy daily necessities, he passed an alley and heard yelling, speaking in a local dialect. At first glance, he was not from the local area, but should be from the southern part of Hunan, because Ge Xiaohua’s mother was from southern Hunan and visited relatives when he was a child. When I was growing up, I often heard Shonan dialect, so I was able to distinguish the accent there.

"Grinding kitchen knives, sharpening scissors..." The words in the southern Hunan dialect were repeated through loudspeakers in the alley, pushing a dilapidated tricycle full of tools and the like.

"There are still knife sharpeners now? This kind of old craftsman is rare." Ge Xiaohua was attracted by the middle-aged man who sharpened the kitchen knife. He stood by and observed for a while, and found that few people care about it, even less than the kind of peddler who wraps sofas. People patronize.

"Modern people seldom find this kind of master to sharpen their knives. It is simple and convenient to buy some special sharpening tools at home. Moreover, it is not worth much to change a kitchen knife that has been used for a long time. Why do you still use sharpening?" This kind of old craftsman sharpens the knife with a sharp knife. If the kitchen knife is made of special steel, it is still difficult to sharpen the ordinary knife.

The middle-aged man called for several hours, but no one came. Ge Xiaohua secretly took out a dull kitchen knife from his portable space, that is, the kitchen knife he had practiced before. After leaving it for a while, it became a little dull. Take a look at the traditional skill of Qiang Dao, after all, it is only heard, and rarely seen in person.

"Master, I have a kitchen knife here, sharpen it for me, how much is it once?"

"Twenty dollars."

"Okay, trouble."

Ge Xiaohua also understands why no one comes to sharpen kitchen knives, because the price of 20 yuan a time can almost buy a low-quality kitchen knife, not to mention the price of kitchen knives in ordinary families is not expensive, that is, dozens, at most hundreds, It costs 20 yuan to grind one time. No one will do such a sale.

Ge Xiaohua took the kitchen knife, and the old master unloaded all the tools, fixed the kitchen knife with a shelf, and took out a small squid knife. The sharp squat knife is cold and cold, and it looks extraordinary at first glance.

"This Qiang knife has a long history and has a long history." The Qiang knife, which contains the vicissitudes of time, was sharpened back and forth on the ordinary kitchen knife made by Ge Xiaohua. At that time, the control of the kitchen knife is still unique, and the hand is extremely stable.

"It's not easy to maintain one movement for a long time." Ge Xiaohua has been standing by the side, feeling the technique and atmosphere of Qiang Dao, and the value of ingenuity has improved a lot. There are fewer and fewer such veteran craftsmen, and the skill of Qiang Dao will also Because of the development of the times, it will be gradually eliminated.

The old master clanged Ge Xiaohua's kitchen knife very sharply for half an hour, which was an eye-opener.

"Isn't it more efficient for the master to use a grinder for grinding?"

"The temperature of the grinding machine is not easy to control, and it is easy to anneal. Once annealed, the kitchen knife will be useless." Ge Xiaohua actually knows it, but he just wants to try the professional skills of the master.

The so-called doing one line and loving one line, although knowing that the business of Qiang Dao is getting worse and worse, the master still insists on Qiang Dao, and goes to various places to carry out Qiang Dao, and will not be limited to one place.

There will always be someone who will come to strike a knife. As long as there is this kind of craftsmanship, you will not be afraid to travel all over the world.

Ge Xiaohua gave 20 yuan to the old master, and then introduced him to Gejia Village to make knives. With Ge Xiaohua’s introduction, his business is not bad. There are few knives in the county, but there are many in the village. For kitchen knives, sickle knives, etc., if you choose the right place, there must be business, and the master's craftsmanship is not bad. When he was near Gejia Village, Ge Xiaohua would go to help, and then he gained some skills about knives.

The master master went to the next county to practice the Qiangdao. Ge Xiaohua has accumulated the Qiangdao technique in the past few days, and the core is the Qiangdao that has been used for decades.

"Build a sharp knife!" Ge Xiaohua is still very interested in the sharp knife, because whether it is a kitchen knife or a sword, the maintenance in the later stage is actually extremely important. Although the whetstone is a good way to sharpen it, it takes a lot of time It takes too long and requires a lot of patience. The way of sharpening the knife should be in the middle of machine grinding and whetstone grinding. It has both the efficiency of machine grinding and the quality of manual whetstone grinding. Combining the two methods , can make the knife sharper, and because the temperature generated when the knife is not very high, annealing can also be avoided.

Qiangdao is also a skill of blacksmiths. Ge Xiaohua has the psychology of learning after seeing it. This is why he has been helping the master and his super learning ability. After watching it a few times, he understands. The principle of Qiang Dao is that it is impossible to build a set of tools now. The fixing of shelves and the like is still very simple, but Qiang Dao needs to be carefully crafted. The steel of Qiang Dao must be good, but good steel It is very troublesome, so it is not so simple to build a Qiangdao.

After researching for a day, according to the actual situation, Ge Xiaohua started to build. Qiang Dao belongs to the category of tools, which can enhance Ge Xiaohua’s ability to maintain the sharpness of knives. Therefore, making tools is more difficult than making ordinary ironware. Ge Xiaohua didn’t build them at the beginning. Hammers, anvils, etc., actually failed too many times after trying many times, so they were left idle.

After the blacksmith's level has improved a lot, he started to make tools, so he made a violent hammer, an anvil with light, and some small hammers, all with light, which improved the efficiency of making. Even so, Ge Xiaohua The brilliance level of the tools used is actually not high. Now that Ge Xiaohua is making Qiang Dao, he will remake other blacksmith tools to see if he can produce suitable tools.

After upgrading to LV7, Ge Xiaohua didn't feel any difference. You can test the difference between LV7 and other levels by building tool-type irons. Maybe the probability of making tools will be much higher.

"Special steel!" Ge Xiaohua used a special steel to make the knife. Since he wants to sharpen other kitchen knives, knives and other cutting edges, the hardness of the knife must reach a relatively high level. The tools are all curled up, what's the point of this.

(End of this chapter)