The ironware I made shines

Chapter 246 Soul Injection
Although Ge Xiaohua didn't know who customized this kind of figure, he felt that there was still a market. Rather than looking for a buyer, it would be better to make the work.

Shueisha did not get Ge Xiaohua to jointly create a figure, so the order might die prematurely. For Ge Xiaohua, since the big customer is in China and there are so many fans of Whitebeard, he should create it first, and then through live broadcast, WeChat, WeChat, etc. Blogs and other channels can be used to promote it. Anyway, it has been authorized by the genuine version, and the profit will belong to Ge Xiaohua. At least the copyright fee must be earned back within these three years.

"3D printing can print the shape of the white beard, and I can build the weapon myself. This printing can be handed over to Marvel, using advanced 3D printing, and using resin as the material." Ge Xiaohua only needs to spend about [-] U.S. dollars to make the Marvel helped to print out the shape of the white beard, borrowing from the character shape in the anime, and adopting a one-to-one ratio, that is, a white beard as tall as a person!

Ge Xiaohua contacted the 3D printing department of Marvel Company. With the experience of printing fairy armor before, it was very easy to connect, except that the cost of the resin white beard shape reached [-] U.S. dollars, but the weapon would not With too much cost, I built it by hand. In addition to materials and fuel, the most expensive thing is labor costs.

Ge Xiaohua did not want to cooperate with Shueisha because he knew that the distribution of benefits would be uneven. According to their ideas, Ge Xiaohua only built the weapon part. They built the torso and contributed the copyright. The biggest contributor to the purchase of this white beard figure is, In fact it seems to be the case.

But according to Ge Xiaohua's idea, weapons are the key, and everything else is a foil. Therefore, the uneven distribution of benefits in joint construction will lead to the failure of cooperation. Bought the copyright, and then went to build it myself.

Completely according to today's 3D printing technology, as long as the design pattern is output, and then put in materials, it can print out exactly the same perfect objects, even buildings can be printed, not to mention animation hand-made models of resin materials.

It's just that there is no "soul" created in this way. To give a "soul", Ge Xiaohua must do it himself, and this is the core!

The Japanese don't know who owns the core, so Ge ​​Xiaohua is unwilling to jointly build it. Instead, he spent 300 million yuan in copyright fees and obtained the authorization qualification of the "Three Giant Dragons" figure, which can be independently built.

Ge Xiaohua asked Marvel 3D Printing Studio in the United States to print the white beard. It will take a certain amount of time, not the production time, but the transportation.

So during this period of time, Ge Xiaohua began to create the magical weapon in Baibeard's hand that looked like a closed knife, and when Whitebeard died, the knife was also inserted into Whitebeard in the form of a flagpole in the comics. The significance of this knife can be seen from the tomb of his father.

Therefore, Ge Xiaohua mainly combined the two original knife types of Guandao and Naginata, and then built it according to the ability of this knife in the comics. It is said that because of this knife, Whitebeard achieved the unity of human and knife, and made a big splash in the top battle. Divine power, and this knife is also a divine weapon, with added domineering, the ability to shake fruit, etc., and only White Beard can control it.

This is also the reason why Whitebeard's knife was inserted in front of the grave and was not stolen.

In order to create this White Beard knife, Ge Xiaohua also revisited "One Piece", and he couldn't help but have some ideas about why the character White Beard is liked by fans.

"Whitebeard's fearless aura, mutual suspicion and broad-mindedness are admired by people, and they are both similar and different from Guan Erye's loyalty." When Ge Xiaohua made this knife, he was According to the comparison of the model, it is different from the general Guandao, and it will be one size smaller, because although the model of Whitebeard is one-to-one, considering the transportation, the height has been reduced to about 1 meters.

The weapon he uses must be smaller and lighter, and the blade will also be reduced, because it is a model, there is no need to sharpen it, but the shape must be exquisite!
The Whitebeard Knife made by Ge Xiaohua has reached the Blu-ray level, and he has been busy for about half a month. When the model of Whitebeard was delivered to the county, models from many countries and regions were obtained.

"There is no bump, and the protection measures are good. The three thousand dollars is more cost-effective." The white beard standing in front of Ge Xiaohua is exquisitely shaped, mighty and domineering, as if he is about to swing a big knife at the enemy, but there is no weapon in his hand, which looks like Somewhat empty.

Ge Xiaohua inserted the finished sword into Whitebeard's hand, and a perfect figure of "One Piece" in Whitebeard's fighting state was completed!
"Soul injection is really different."

Blu-ray White Beard Knife: Exquisite +12, Momentum +5, Infection +10
This momentum +5 was enchanted by Ge Xiaohua with the purple light ring, and it succeeded once. One more momentum +5 made this figure have a fearless momentum. Standing in front of the white beard, you can feel a kind of momentum , Experience the plot of the characters in the anime.

"The first hand-made work has been successfully completed! It's time for publicity, so let's live broadcast." Ge Xiaohua's animation work will not be handed over to Shueisha for sale. After all, he has already obtained the copyright, and there is no need for another intermediary , this animation hand-made work was completed by Ge Xiaohua. Although the main part of the resin is a 3D printed dog, the design of the pattern was also created by Ge Xiaohua through his own understanding and combined with the characters in the animation. He also gave the copyright Fee, so this is a genuine figure extended by the same person, and Ge Xiaohua has the right to sell it.

Therefore, Ge Xiaohua conducted a live broadcast, explained what he was busy with during this time, and communicated with the water friends.

"Wow, Whitebeard!"

"My dear love!"

"Anchor, how much is it? Did you buy it? Can you transfer one hundred to me?"

"I offer a thousand!"

The value of the figure is very high, especially if it is imported from Japan, the value will be doubled several times, so generally the figure is collected by local tyrants, while the domestic fake figure is quite different from the original version, but the price is much cheaper. But there is no collection value.

Ge Xiaohua didn't say anything about the price, but talked about the origin of this figure.

"I bought the copyright of this figure from Shueisha and built it myself. The main body of Whitebeard was customized from the American Marvel 3D printing studio, and this weapon was built by myself. What do you think?"

"Anchor talents, they actually have a relationship with Marvel, and even customized the white beard shape with them. This weapon is a bit different from the anime."

"Yes, the ones in the anime are not so vivid."

"It's too arrogant."

"Wow, how does this knife look like Qinglong Yanyue knife?"

"Anchor, did you learn from Guan Dao?"

Ge Xiaohua saw the explosion on the bullet screen, and his popularity rose. He began to talk about some of the craftsmanship and inspiration of this knife. He is a blacksmith himself, and the live broadcast room is also Ge ​​Xiaohua's blacksmith shop, so he will not talk about forging topics. Off topic, and he said so much, in fact, he did not want to drink, but to find a suitable buyer.

(End of this chapter)