Log in to the farming game in advance
Chapter 198
Chapter 198
The mouth of the barrel is not large, and the cutter for pulling the rifling extends into the barrel to push and pull, and the shadow makes it difficult to see the rifling.
The cutter resets, withdraws from the mouth of the barrel, the ratchet rotates again, and the barrel rotates one-fifth again.
There are five riflings cut this time, and now the third rifling is being cut.
"The output of the steam engine is stable!"
"Two rifling lines appear on the barrel!"
"The third cut!"
As the worker's murmur fell, the tiny cutting knife was inserted into the pipe again, rotated, and came out of the bore, and the third rifling was completed.
Sizzle sizzle.
The whole process was a bit slow, accompanied by a violent hiss, which was the sound of a knife cutting the inner wall of the barrel.
"Turn it down a little more." Allen's voice rang in his ears.
The worker who was fascinated came back to his senses, "Oh oh." Then he quickly turned down the output power of the steam engine.
Having said that, from Allen's point of view, it is impossible to see the cutter working in the barrel. What is the basis for Allen to fine-tune the fourth cut?
If you know the principle, you are no longer an ordinary worker. The workers looked at each other and continued to wait for the machine to cut the fifth rifling.
After a while, the five riflings of the first barrel were cut. The orcs shut down the steam engine and machine tool, took out the barrel, and then fixed it with their eyes to observe the inside of the barrel at close range.
From near to far, the five spiral lines seem to expand and contract, and converge into an infinitely close point at the end, which is full of wonderful artistic design beauty.
"Master Alan, the five rifling lines are very clear, this is a successful product!" The craftsman yelled in surprise, making no secret of his admiration for Alan.
"No, it was not successful. The third rifling trembled slightly when it was cut to the depth. A node in the three-quarter section was crooked, and the rear line was also crooked." Allen took the barrel and looked it up with his eyes.
Appraisal does not provide dynamic change data, but only introduces the movement of the machine at that time. If you want dynamic data, you need to use appraisal every second, so that you can get the dynamic data that occurs every second when the machine is working.
"Ah..." The orc looked at the beautiful arc inside the gun barrel, but couldn't tell that the line was crooked.
"Let me see."
Abel was curious, took the barrel outside, stretched out his eyes to block the mouth of the barrel, and saw the bright inside of the barrel with the help of the brightness of the sun. rotate.
"It seems that a line is crooked." Abel, the big blacksmith, shook his head, feeling a little dizzy.
The principle of the rifle machine tool is simple, but the steam engine is not a stable output tool, and Allen still needs to fine-tune it.
Half an hour later, Allen and others wasted a lot of gun barrels to finish debugging. Afterwards, the rifling cut by the steam engine was very stable and the arc was moderate.
In addition, miniature bullets that fit rifled barrels are also in hot production.
With the rifled machine for the barrel of the flintlock, the next industrial machine tool was the rifled machine for the barrel of the cannon.
It will also take a while to manufacture that thing, and we have to wait for the next batch of steam engines to be manufactured, which does not mean that the machine tools can be used after they are manufactured.
Faced with the beast tide tomorrow, smoothbore flintlock guns will still be the mainstay. Rifled guns have not yet entered the mass production stage, and the caliber of newly-made rifled guns is slightly smaller than that of smoothbore guns, with a caliber of about 12mm.
Due to the change of caliber, the firing device and the butt must also be redone, which is a time-consuming and labor-intensive project.
……
It was still dark, and the night was getting dark.
The cat-eared orcs patrolling the city wall found countless birds in the forest flying over, densely packed, covering the bright starlight.
The cat-eared orc grasped the flintlock in his hand, a little nervous.
Asuka's restlessness is by no means accidental, and the news that the beast horde is about to approach the city has already spread among the musketeers.
"Cuckoo!"
The strange voice of the pigeon sounded above his head. Although the cat-eared orc couldn't understand the language of the pigeon, the two branches in the pigeon's beak fell to the side, and he immediately knew what was going on in front of him.
According to the body language chart of pigeons during the war, two wooden sticks were thrown against the wall, and two coos were made, which meant that the beast tide was coming.
The form was made by Lord Allen himself. During the military training the previous week, a pigeon body language exercise was also carried out. All musketeers have adapted to the convenience of using animal eyeliner to roughly know the situation of the war.
"The beast tide is coming!"
The soldiers at the top of the wall immediately ran to the giant bonfire plate on the city wall, burned the kerosene fire sticks on the wall into the plate, and threw all kinds of firewood on the wall into the bonfire plate by the way.
Another messenger picked up the huge banana fan next to the campfire and fanned it vigorously.
Huh, the fire is burning violently.
Thick black smoke billowed up into the starry night, and the flames lit up the beacon tower.
When the soldiers of the beacon tower next door saw the beacon fire, they also lit the beacon fire, and the smoke billowed.
In less than a few minutes, the entire wall of Tomorrow City was lit with beacon fire.
The night patrols in the city went to the streets to beat gongs and drums, shouting very loudly, wishing that the whole city would wake up.
"The beast tide is coming!"
"Get up quickly, the beast tide is coming!"
The architectural planning of Tomorrow City is very strict. The residential buildings are all built in the same area, and the barracks are built near the residential area. The orcs who beat the gong quickly completed a circle and woke up all the sleeping orcs.
The orcs have a background in military training. After hearing the sound of the gong, they got up on the bed, put on their clothes and shoes, and strode like flying. In less than a minute, they had turned into straight orcs in green uniforms and stood in the dormitory. Outside, lined up neatly without the slightest panic.
They didn't have guns, and they kept them in the arsenal. After gathering, the team leader led the team and quickly marched towards the training ground of the barracks.
The place where Allen lived was also in a residential area. After being woken up, he also ran towards the city wall at a very fast speed.
Residential buildings all over the city were lit with candlelight, and the orcs who did not join the army were in no mood to sleep. They wanted to go to the barracks and the city wall to see how the situation was going.
But they don't have a part in the city wall, so the orcs who can only go to see the barracks set off collectively.
"Hurry up, your father is going to war, take a look now!"
"Mom, I want to join the army too!"
In many families, the children yelled loudly and were stopped by the mothers at home.
However, there are more and more ordinary orcs surrounding the gate of the barracks, and some even saw Alan in the barracks.
Uh, let me declare again, I have changed from full-time to part-time writing.
As for when to return to full-time book writing, it is estimated to be N years later.
(End of this chapter)
The mouth of the barrel is not large, and the cutter for pulling the rifling extends into the barrel to push and pull, and the shadow makes it difficult to see the rifling.
The cutter resets, withdraws from the mouth of the barrel, the ratchet rotates again, and the barrel rotates one-fifth again.
There are five riflings cut this time, and now the third rifling is being cut.
"The output of the steam engine is stable!"
"Two rifling lines appear on the barrel!"
"The third cut!"
As the worker's murmur fell, the tiny cutting knife was inserted into the pipe again, rotated, and came out of the bore, and the third rifling was completed.
Sizzle sizzle.
The whole process was a bit slow, accompanied by a violent hiss, which was the sound of a knife cutting the inner wall of the barrel.
"Turn it down a little more." Allen's voice rang in his ears.
The worker who was fascinated came back to his senses, "Oh oh." Then he quickly turned down the output power of the steam engine.
Having said that, from Allen's point of view, it is impossible to see the cutter working in the barrel. What is the basis for Allen to fine-tune the fourth cut?
If you know the principle, you are no longer an ordinary worker. The workers looked at each other and continued to wait for the machine to cut the fifth rifling.
After a while, the five riflings of the first barrel were cut. The orcs shut down the steam engine and machine tool, took out the barrel, and then fixed it with their eyes to observe the inside of the barrel at close range.
From near to far, the five spiral lines seem to expand and contract, and converge into an infinitely close point at the end, which is full of wonderful artistic design beauty.
"Master Alan, the five rifling lines are very clear, this is a successful product!" The craftsman yelled in surprise, making no secret of his admiration for Alan.
"No, it was not successful. The third rifling trembled slightly when it was cut to the depth. A node in the three-quarter section was crooked, and the rear line was also crooked." Allen took the barrel and looked it up with his eyes.
Appraisal does not provide dynamic change data, but only introduces the movement of the machine at that time. If you want dynamic data, you need to use appraisal every second, so that you can get the dynamic data that occurs every second when the machine is working.
"Ah..." The orc looked at the beautiful arc inside the gun barrel, but couldn't tell that the line was crooked.
"Let me see."
Abel was curious, took the barrel outside, stretched out his eyes to block the mouth of the barrel, and saw the bright inside of the barrel with the help of the brightness of the sun. rotate.
"It seems that a line is crooked." Abel, the big blacksmith, shook his head, feeling a little dizzy.
The principle of the rifle machine tool is simple, but the steam engine is not a stable output tool, and Allen still needs to fine-tune it.
Half an hour later, Allen and others wasted a lot of gun barrels to finish debugging. Afterwards, the rifling cut by the steam engine was very stable and the arc was moderate.
In addition, miniature bullets that fit rifled barrels are also in hot production.
With the rifled machine for the barrel of the flintlock, the next industrial machine tool was the rifled machine for the barrel of the cannon.
It will also take a while to manufacture that thing, and we have to wait for the next batch of steam engines to be manufactured, which does not mean that the machine tools can be used after they are manufactured.
Faced with the beast tide tomorrow, smoothbore flintlock guns will still be the mainstay. Rifled guns have not yet entered the mass production stage, and the caliber of newly-made rifled guns is slightly smaller than that of smoothbore guns, with a caliber of about 12mm.
Due to the change of caliber, the firing device and the butt must also be redone, which is a time-consuming and labor-intensive project.
……
It was still dark, and the night was getting dark.
The cat-eared orcs patrolling the city wall found countless birds in the forest flying over, densely packed, covering the bright starlight.
The cat-eared orc grasped the flintlock in his hand, a little nervous.
Asuka's restlessness is by no means accidental, and the news that the beast horde is about to approach the city has already spread among the musketeers.
"Cuckoo!"
The strange voice of the pigeon sounded above his head. Although the cat-eared orc couldn't understand the language of the pigeon, the two branches in the pigeon's beak fell to the side, and he immediately knew what was going on in front of him.
According to the body language chart of pigeons during the war, two wooden sticks were thrown against the wall, and two coos were made, which meant that the beast tide was coming.
The form was made by Lord Allen himself. During the military training the previous week, a pigeon body language exercise was also carried out. All musketeers have adapted to the convenience of using animal eyeliner to roughly know the situation of the war.
"The beast tide is coming!"
The soldiers at the top of the wall immediately ran to the giant bonfire plate on the city wall, burned the kerosene fire sticks on the wall into the plate, and threw all kinds of firewood on the wall into the bonfire plate by the way.
Another messenger picked up the huge banana fan next to the campfire and fanned it vigorously.
Huh, the fire is burning violently.
Thick black smoke billowed up into the starry night, and the flames lit up the beacon tower.
When the soldiers of the beacon tower next door saw the beacon fire, they also lit the beacon fire, and the smoke billowed.
In less than a few minutes, the entire wall of Tomorrow City was lit with beacon fire.
The night patrols in the city went to the streets to beat gongs and drums, shouting very loudly, wishing that the whole city would wake up.
"The beast tide is coming!"
"Get up quickly, the beast tide is coming!"
The architectural planning of Tomorrow City is very strict. The residential buildings are all built in the same area, and the barracks are built near the residential area. The orcs who beat the gong quickly completed a circle and woke up all the sleeping orcs.
The orcs have a background in military training. After hearing the sound of the gong, they got up on the bed, put on their clothes and shoes, and strode like flying. In less than a minute, they had turned into straight orcs in green uniforms and stood in the dormitory. Outside, lined up neatly without the slightest panic.
They didn't have guns, and they kept them in the arsenal. After gathering, the team leader led the team and quickly marched towards the training ground of the barracks.
The place where Allen lived was also in a residential area. After being woken up, he also ran towards the city wall at a very fast speed.
Residential buildings all over the city were lit with candlelight, and the orcs who did not join the army were in no mood to sleep. They wanted to go to the barracks and the city wall to see how the situation was going.
But they don't have a part in the city wall, so the orcs who can only go to see the barracks set off collectively.
"Hurry up, your father is going to war, take a look now!"
"Mom, I want to join the army too!"
In many families, the children yelled loudly and were stopped by the mothers at home.
However, there are more and more ordinary orcs surrounding the gate of the barracks, and some even saw Alan in the barracks.
Uh, let me declare again, I have changed from full-time to part-time writing.
As for when to return to full-time book writing, it is estimated to be N years later.
(End of this chapter)
You'll Also Like
-
I got the scarlet blood at the beginning.
Chapter 222 7 hours ago -
One Piece: The Ninja Who Started as a Fisherman
Chapter 205 7 hours ago -
One Piece: I'm Luffy
Chapter 179 7 hours ago -
City Elf: My Charizard can use Rasengan
Chapter 75 7 hours ago -
Devil Fruit: Invincible from the Tremor-Tremor Fruit
Chapter 200 7 hours ago -
At the beginning, the system was competing to bind, and I became invincible
Chapter 151 7 hours ago -
Xingtie Palu: Capturing the Black Swan at the Beginning
Chapter 175 7 hours ago -
Lord: Amplify a hundredfold and create the supreme divine domain!
Chapter 169 7 hours ago -
As a top star, I only want to eat soft rice
Chapter 238 7 hours ago -
You are a mage, what the hell is the explosion of physical attack?
Chapter 284 7 hours ago