Super industrial overlord

Chapter 162 Jili's Flying Car

Unlike the first flying car developed by Zhang Yi and his Colorful Stone Group, the first flying car developed by the Jili Group used propellers as power.

When driving on the road, the wings of the flying car will be folded. When the flight mode is turned on, the wings of this flying car will be unfolded and become a small aircraft.

So the shortcoming of the first flying car before is very obvious, that is, when this flying car wants to fly, it must need a runway.

Although the reporters who came to the press conference this time did not know!What is the style of Jili Group's flying car?However, this does not prevent them from guessing.

Some people speculate that this flying car of Jili Group will continue the design idea of ​​the first flying car before, but it will definitely change in appearance.

Some people speculate that the flying car they designed this time is likely to adopt other flying methods. For example, in flight mode, it adopts the same propeller method as a helicopter.

After all, this method is the most likely to achieve vertical take-off and landing, and its practicality has also been greatly improved. Of course, this method is far from comparable to the first one in terms of flight speed.

Some people even speculate that maybe the flying car designed by Jili Group this time is likely to be in the tilt-rotor mode, because only this mode can take into account both vertical take-off and landing and flight speed.

Soon, the host of the press conference of Geely Group came to the middle steps. At this moment, these reporters excitedly discovered that the host of the press conference of Geely Group was not someone else but their group Chairman Li Sufu.

"Hi everyone! Welcome to the Jili Group's flying car press conference. The flying car that our group will release this time will subvert everyone's definition of flying cars in the past.

In the past, the flying cars that everyone knew in reality basically stayed in the form of propellers to drive flying cars.

Regardless of whether it is a fixed-wing flying car, a propeller flying car, or a tilt-rotor flying car, it is basically driven by a propeller.

After all, compared with the propeller drive method, the use of aviation jet engines, turbofan engines, or pulse engines is not suitable for flying cars at all, so the propeller method has become the only choice for many flying car R&D manufacturers.

At the same time, all current flying car manufacturers basically use petroleum as energy, or gasoline and other fuels as energy.

But this time, we, Jili Group, want to change everyone's perception of flying cars in the past. This is the second flying car of our group, the dream flying car. "

After finishing speaking, a very dreamy flying car appeared on the huge display screen behind Li Sufu, with a gorgeous appearance, a streamlined body, and a design without propellers.

At this time, Li Sufu began to say again; "Compared with the previous generation of flying cars of our group, this flying car is more perfect. It can not only realize vertical take-off and landing, but also This flying car has been greatly improved in terms of load capacity, flight speed and battery life. At the same time, in terms of safety performance, it is incomparable to the first generation of products.

This dream flying car has two seats, a cruising range of 700 kilometers in the air, and a maximum speed of 350 kilometers per hour. It only takes a dozen seconds to switch between flight mode and driving mode.

Although this dream flying car also has folding wings, compared with the six-meter-long wings of our group's previous generation, the wings of this dream-class flying car are only two meters short.

At the same time, the safety performance of this flying car is also very high. It is not only equipped with various safety facilities, such as airbags, seat belts, etc., if an accident occurs during flight, this flying car also has the same personal protection as an airplane. The parachute, and the overall parachute of the vehicle. "

Then the press conference proceeded to the part of reporters asking questions. Of course, like all products, what these reporters are most concerned about is when will it be available on the market?
Of course, Li Sufu answered these questions one by one, but their Jili Group is not the Colorful Stone Group after all. Complete the research and development within the time, and conduct test flight.

Therefore, Li Sufu is still not sure when he will be able to complete the research and development and conduct a test flight, but he still gave everyone a vague answer, that is, their Jili Group will complete the research and development work within five years and go public within ten years.

With the successful completion of the Jili Group's press conference, there was an overwhelming news on the Internet all of a sudden, and even this trend has surpassed the news caused by Zhang Yi and his colorful stone group last time.

At the same time, as Jili Group once again announced that it is preparing to develop flying cars, and even released a series of conceptual drawings of flying cars, many domestic and foreign manufacturers in this area began to secretly worry.

You must know that after Zhang Yi and the Colorful Stone Group accidentally leaked the flying car, the stocks of their car manufacturers have plummeted one after another, but now that the wind has just passed, and now the Jili Group has come again. , which makes them very passive.

So just after the Jili Group's press conference, the stocks of these companies began to fall again. In addition, even oil stocks began to fall.

As a result, many car manufacturers have also started to launch flying cars, and even some manufacturers that had no plans in this regard have begun to hurriedly announce their plans to launch flying cars.

In fact, these car manufacturers are very clear that the world's transportation model is developing in the direction of three-dimensional and intelligent, and people's travel will definitely not be limited to the ground in the future.

The limitations of ground transportation methods are too great, especially in remote mountain villages.

Zhang Yi also watched the Jili Group's flying car conference, and Zhang Yi was also very optimistic about their group's flying car concept car.

Although there are only ten super-strong ducted fans provided by Zhang Yi, and due to cost considerations, their flying cars are made of aluminum alloy materials, which are far inferior to those of Zhang Yi and his group's flying cars.

As a result, their Jili Group's flying car is far inferior to the flying car Zhang Yi and the others just developed in terms of load capacity, cruising range, and flight performance.

Therefore, the flying car of the Jili Group still uses the previous folding wing design to improve the flying performance and cruising range of the flying car. At the same time, the appearance design of their flying car is also very good, which makes Zhang Yi reluctant I don't admire the designers of their Jili Group.

After the concept flying car conference of Jili Group, the previous test flight video of Qicaishi Group was once again dug out by the majority of netizens, and compared with the flying car of Jili Group.

Soon, these people came to the conclusion that the power used by the flying car of Jili Group and the flying car in the previous Qicaishi test flight video are the same, and they are all powered by high-performance electric ducted fans. drive.

In the following nearly a month, Zhang Yi and the others conducted several tests on the flying car developed by their Qicaishi Group. However, unlike the previous test, because the previous test was during the day, it caused a huge sensation. , It also made their colorful stone group come into the eyes of everyone at once.

However, with the lessons learned during the first test flight, their Qicaishi Group has changed the test flight work of flying cars to night, so the outside world does not know that their Qicaishi Group has conducted flying cars many times. Test flights, and among them are long-range, high-intensity flights.

Of course, due to the Geely Group's press conference, during this period, many domestic and foreign automobile manufacturers came to their door, wanting to buy shares or buy out their ducted motor technology. Of course, Zhang Yi would not Give them face and directly reject their request.

There are also manufacturers like Jili Group, they know such technology, and now Qicaishi Group is not a soft persimmon, they can twist it whatever they want.

Zhang Yi's colorful stones will never be sold, so they are just going to buy Zhang Yi's mature products. Zhang Yi naturally welcomes this part of the manufacturers, and this is only for domestic car manufacturers.

For foreign automakers who want to buy Zhang Yi's high-performance ducted motors, Zhang Yi will definitely not sell them. After all, their group's ducted motor production lines have not yet been established.

Even after the production line is established in the future, like the previous bearings, it will first meet the domestic demand, and then if the policy and other requirements are met, he will consider selling products to foreign manufacturers.

As for whether foreign manufacturers will imitate Zhang Yi's colorful stone high-performance ducted motors during this period of time, Zhang Yi is really not afraid. After all, these motors are actually structurally different from ordinary motors. Not much, just different in material.

In terms of materials, it is actually the most difficult to imitate. If there is no material formula and smelting process, then it is absolutely impossible for them to be imitated. Zhang Yi believes that if there is no material formula and smelting process, then even the world's largest No matter how good the material science and technology laboratory is, it is impossible to imitate or develop materials with the same or similar performance within a dozen or twenty years.

(End of this chapter)