Super industrial overlord

Chapter 160 Mission
The data of this ultra-high-precision combined machine tool was quickly tested. Sure enough, as Zhang Yi and the others expected, the precision of this machine tool has reached the level of ultra-high-precision CNC machine tools, even compared with European and American counterparts. Type products come, no less.

Among them, the highest precision aperture accuracy can reach the level of 0.001 microns, and even the flatness of plane cutting can reach the level of 0.005 mm.

After the data test came out, whether it was Zhang Yi himself, these academic masters, military representatives, or Huang Xiru, who had just come to the Qicaishi Group as the general manager of the group, they were all very happy.

After all, as an ultra-high-precision combined machine tool, what we pursue is high precision, and it is very rare for the machine tool with the highest precision on the earth to reach the level of 0.02 or 0.01 mm in plane cutting, let alone 0.005 mm. millimeters away.

For this ultra-high-precision combined machine tool, it is the same as most of the products produced by the Qicaishi Machinery Group before. Except for a few places and structures that must apply for patents, other important parts, he Not ready to apply for a patent.

Because he is very confident that this ultra-high-precision machine tool, even if developed countries such as Europe and the United States, want to imitate it, it will not be successful in a short while, and it will take at least 15 to 20 years.

However, although the ultra-high-precision CNC machine tool of their Colorful Stone Group has been successfully developed, at this time, the top students present are very clear that some components on this ultra-high-precision CNC machine tool still use foreign products.

Especially electronic semiconductor products, for example, the chips on this machine tool, and other electronic products.

"Mr. Zhang! I don't know when your ultra-high-precision CNC machine tools will be mass-produced? What is the approximate annual output? Our military needs approximate data from your Colorful Stone Group.

After all, ultra-high-precision CNC machine tools are different from other machine tools, which is related to our country's strategy.

When you were preparing to produce ultra-high-precision CNC machine tools, the high-level executives specially discussed this matter before, and in the future, your Qicaishi Group can produce ultra-high-precision CNC machine tools on a large scale.

The whereabouts of these ultra-high-precision machine tools you produce must be clear, and a tracking system must be installed on each machine tool. All companies that purchase machine tools must pass the national audit before purchasing.

Regarding this point, Mr. Zhang!I hope you can understand. "Major Ma said.

"Okay! Major Ma, I am naturally aware of this. After all, ultra-high-precision CNC machine tools are not ordinary machine tools. Even if you don't tell me, I will not sell them to all companies, let alone let these machine tools go out of the country. Line." Zhang Yi said.

Regarding the role of ultra-high-precision CNC machine tools, Zhang Yi is very clear that many military equipment need to be used for production and processing. For example, many parts and components in missile aircraft need ultra-high-precision machine tools to process. In the case of high-precision machine tools, the performance of the produced equipment will be greatly reduced.

This is also the reason why foreign countries embargoed ultra-high-precision CNC machine tools against the Dahua Empire.

And now all the ultra-high-precision CNC machine tools produced by foreign manufacturers will be equipped with positioning systems to monitor the whereabouts of these machine tools to prevent these machine tools from entering these embargoed countries.

Hearing that Zhang Yi didn't have any dissatisfaction inside, Major Ma breathed a sigh of relief.

However, he was still not sure how many ultra-high-precision CNC machine tools Zhang Yi and his company could produce each year, so he asked again; "Then, can you make some predictions about your production capacity now, so that we can have a bottom line.

After all, as a machine tool manufacturer, your Qicaishi Group has developed such an ultra-high-precision CNC machine tool. It must be to make money in essence. If it is not for making money, your Qicaishi Group will definitely not develop this machine tool.

As for our Dahua Empire, many domestic companies need these ultra-high-precision CNC machine tools. We will arrange these companies to talk to you at that time. Otherwise, there will be more wolves and less meat, and it will be easy for your group to make enemies. "Major Ma said.

After hearing Ma Jun's words, Zhang Yi did not speak immediately, but turned his attention to Wang Hong, the person in charge of the machine tool project, and asked him to determine the price of this ultra-high precision milling and drilling compound machine tool.

Of course, Wang Hong knew what Zhang Yi meant when he looked at him. After thinking about it for a while, Wang Hong replied, "Mr. Zhang, after our company's large-scale production line is completed, the annual output will be about one year. Around a hundred."

"What! About one hundred machines!" After hearing Wang Hong's words, Major Ma was completely shocked. You must know that this is an ultra-high-precision CNC machine tool!

The annual output of other high-precision CNC machine tools in China is very limited, and basically can only be maintained in single digits. Even the largest manufacturer of high-end CNC machine tools in China can produce only a few dozen ultra-high-precision CNC machine tools each year. Taiwan only,

It is conceivable how difficult it is to manufacture an ultra-high-precision CNC machine tool, but the scale of the Qicaishi Group is far from being comparable to that of domestic large-scale machine tool manufacturers, but the output is so high. calculate.

And this is still in the early days, he believes that if the female master of the colorful stone group.If it is true, then the production of machine tools of their group will definitely be higher in the future.

"Are you sure that your Qicaishi Group can really manufacture so many machine tools every year, if it is true, then I will report this matter later." Ma Jun still said with a look of disbelief.

"Yes! Major Ma, since Master Wang has already said so, then it's true, we can definitely do it within this year." Zhang Yi said without waiting for Wang Hong to reply.

Because he knew that with Wang Hong's character, if she was allowed to answer, there would definitely be no good things to say, because Wang Hong, like Huang Xiru, hated people doubting her words the most.

After hearing Zhang Yi's words, Ma Jun and Fang Jinming were actually a little skeptical about their ability to increase the production of colorful stones to this level, but they didn't say anything more. People make decisions.

If the Colorful Stone Group can really increase its production to this level, it will be a very good news for the entire Dahua Empire, which can greatly reduce the gap in this aspect of the Dahua Empire.

If the number of ultra-high-precision CNC machine tools from other machine tool manufacturers is added, it can basically meet domestic needs.

"Okay! Since you have already said that, Mr. Zhang, I will report to the superior according to what you said, Mr. Zhang.

boss Zhang!Now that you have completed the manufacture of ultra-high-precision CNC machine tools, the country will also entrust you with major scientific research projects. I hope you can do it. After finishing speaking, Ma Jun took a document from Fang Jinming and handed it to Zhang Yi.

"Mr. Zhang! You don't need to hurry back to me, I hope you can read it carefully and confirm it, and then answer me, if you are sure that your colorful stone can be completed, then we will transfer the research funds to your group when the time comes On the account." Ma Jun said after watching Zhang Yi take over the document.

"Okay! Major Ma! I will read this document carefully, and I will discuss it with our group's technical researchers." Zhang Yi replied cautiously.

"Mr. Zhang! As for your ultra-high-precision CNC machine tools, I hope that your colorful stones can be given priority to our military, and it is best to give this machine to our military." On the machine tool being tested, Fang Jinming finally couldn't help but said.

Regarding Fang Jinming's words, Zhang Yi was a little helpless. In fact, Zhang Yi was still depressed before. The military could not wait to get these products produced by their Qicaishi.

But this time their group's ultra-high-precision CNC machine tools succeeded, why have they not responded yet, but for these first batch of machine tools produced, Zhang Yi really has no plans for the military.

So he said, "Lieutenant Fang, Major Ma, although the first machine tool of our Qicaishi Group has been successfully developed, but for this machine tool and the previous few machine tools, our group really cannot give it to your military.

After all, this ultra-high-precision machine tool has only done some simple basic tests, and now no one knows how reliable this machine tool is.

At the same time, our Qicaishi Group also needs it very much. I don’t need to say this, you know it very well, so these machine tools still need to be tested for a longer period of time, so that we can make some improvements to this machine tool. "

"Okay, since you've said that, I won't come to fight with you for the first batch of machine tools in your factory, but after the ultra-high-precision CNC machine tools of your Qicaishi Group start selling, our military must have priority."

In other words, the military is actually very clear that it is impossible for the first batch of ultra-high-precision CNC machine tools produced by their Qicaishi Group to give them to the military. After all, their Qicaishi Group needs it more than the military. Ultra-high precision CNC machine tools.

Then Zhang Yi agreed to the military's request. At the same time, he also planned to let Wang Hong develop other types of ultra-high-precision CNC machine tools, such as the development of ultra-high-precision CNC milling machines, ultra-high-precision CNC planers, and Longmen CNC machining centers. development.

At the same time, he is also very concerned about the research and development mission given to him by the country.

So after Fang Jinming and the others left, Zhang Yi ordered Wang Hong and the others to continue testing the machine tool, while he himself walked towards his office with Huang Xiru holding the document bag in his hand.

Although it is said that even in their company, the fewer people who know about such a task, the better, but as the general manager of Colorful Stone Group, Huang Xiru still has the right to know, let alone if Zhang Yi can't trust Huang Xiru If so, who else can you trust?
(End of this chapter)