Super industrial overlord

Chapter 158 Huang Xiru's Arrival
After arriving at the bedroom in the villa, Zhang Yi opened the curtains, and what came into view was a wide stream. Although it was said to be a stream, it was actually not small, with a width of several hundred meters. At that time, there was not much water in the creek, it was only tens of meters long, and there was water flowing through it, while the rest of the creek was full of pebbles. Although the water in the creek was not very deep, it was crystal clear, and at the same time, you could see the slow water at the bottom. Slowly swimming fish.

At this moment, Huang Xiru also came over, his eyes lit up when he saw the scene outside, it was obvious that he also liked this environment very much.

Zhang Yi turned around and looked at Huang Xiru beside him. He was very satisfied in his heart, but he looked at Huang Xiru's tired eyes and bloodshot eyes.

He walked over, hugged Huang Xiru's waist gently, smelled his familiar fragrance, and said, "Sister Huang! Go to bed and sleep for a while!"

After being hugged gently by Zhang Yi, Huang Xiru's body trembled instinctively, but then he relaxed, and gently leaned his head on Zhang Yi's shoulder.

She originally wanted to refuse, but when she saw Zhang Yi's concerned eyes, she responded softly; "Mmm!" After all, she was indeed very tired during this time.

After listening to Huang Xiru agreeing, he gently hugged Huang Xiru and walked towards the bed in the bedroom, while Huang Xiru also instinctively wrapped his hands around Zhang Yi's neck.

Zhang Yi put Huang Xiru gently on the bed, then kissed her forehead, and said, "Don't think too much, what you have to do now is to close your eyes, have a good sleep, and take care of yourself. Otherwise I will be heartbroken."

"." Huang Xiru, who wanted to say something at first, after hearing Zhang Yi's words, saw his distressed eyes, and said nothing more, but closed her eyes gently.

Sure enough, after Huang Xiru closed her eyes, within 5 minutes, she heard her even breathing. Obviously, in such a short few minutes, Huang Xiru fell asleep.

After watching Huang Xiru fall asleep, Zhang Yi first gently put a key of the villa on the bedside table beside the bed, then stood up and walked out of the bedroom gently, and closed the door carefully, for fear of waking her up.

After leaving the villa, Zhang Yi came to the machine tool assembly workshop. At this time, in the assembly workshop, Wang Hong and the others were conducting the final inspection on the ultra-high-precision CNC machine tool they were about to assemble.

"How is the inspection going? Is it possible to assemble the machine tool in the morning?" Zhang Yi asked after coming to Wang Wang and the others.

"Boss, you are here! All the parts of the CNC machine tool have basically been inspected and can be assembled at any time." Wang Hong replied.

Originally, Zhang Yi wanted to pick up Huang Xiru in the morning and start assembly in the afternoon, but now that he no longer had to pick up Huang Xiru, he planned to assemble the first CNC machine tool in their factory in the morning.

"That's fine! Let's start assembling!" After speaking, let Wang Hong lead the masters in the assembly workshop to start assembling the machine tools.

To manufacture a machine tool, even the most common non-NC machine tool, many parts and various electrical equipment are needed, not to mention ultra-high precision CNC machine tools.

At the same time, there are many parts in the machine tool, the weight is not light, and it is impossible for one person to complete it.

Therefore, the installation of machine tool components requires the cooperation of multiple people to complete.

But fortunately, there are dozens of Xuebas present. Except for the Red Police Engineer who is a human mechanics, most of the other non-human races have great strength. Small cranes, loaders, trailers and more.

Just when Zhang Yi and the others were preparing to install the first CNC machine tool, Fang Jinming, the military representative, and Ma Jun also came to the workshop.

"Didn't you say yesterday that the assembly of the first machine tool of your group started this afternoon? Why did it start in the morning?" Fang Jinming asked immediately after arriving at the workshop.

Since yesterday afternoon, Zhang Yi had already said that the assembly of the first machine tool would start this afternoon, but it started in the morning, which disrupted their original plan.

"Hmm! I had something to do in the morning, but I don't need it now, so I prepared to start assembling in the morning. After all, both your military and our Colorful Stone Group are in a hurry to use it." Zhang Yi replied.

After listening to Zhang Yi's words, Fang Jinming and the others stopped talking. It was indeed the same as what he said. Whether it was Zhang Yi's own Colorful Stone Group or their military, they were all waiting for the ultra-high-precision machine tools to be completed.

But after they started assembling ultra-high-precision machine tools, Zhang Yi might still be able to help?After all, it was not in vain to learn from these masters during this period of time, but Fang Jinming and Ma Jun could only watch from the sidelines and could not help at all. They were soldiers, not technicians.

Ultra-high-precision CNC machine tools include ordinary ultra-high-precision five-axis linkage processing machine tools, CNC milling machines, CNC planers, CNC grinding machines, CNC drilling machines, CNC boring machines, CNC sawing machines, and compound machining centers.

However, Zhang Yi and his Qicai are not going to manufacture one, ordinary-sized ultra-high-precision combined machine tool. Generally speaking, combined machine tools adopt the method of simultaneous processing with multiple tools, multiple processes, multiple surfaces or multiple stations. .

At the same time, its production efficiency is several times, even dozens of times higher than that of ordinary machine tools.

Since the common parts have been standardized and serialized, they can be flexibly configured according to needs, and the design and manufacturing cycle can be shortened. Therefore, combined machine tools have the advantages of low cost and high efficiency, and are widely used in mass production processes, and can form automatic production lines. .

The components of combined machine tools can be divided into five categories: power components, support components, conveying components, control components and auxiliary components. Power components are components that provide active power and feed for combined machine tools, mainly including power boxes and cutting heads. , composed of a power slide.

The supporting part can be equipped with a power slide table, a cutting head or a fixture with a feed mechanism, etc. In addition, there are bases, brackets, adjustable brackets, columns, etc.

Of course, ultra-high-precision CNC machine tools can't be assembled in a day or two. Even Zhang Yi's colorful stone group has many masters, and it can't be assembled in a day or two.

After starting the assembly, these top students sorted the various parts first, and then began to assemble them in the same way. During the assembly, these top students were very careful, very careful, and installed every part very slowly, even Some parts require multiple installations to complete.

In the process of installing the machine tool, a morning passed quickly, but at this time, this ultra-high-precision machine tool has not yet been assembled. How many parts, even 1/10 of the parts are not installed, but even if That's it, Zhang Yi's heart is not in a hurry.

After getting off work in the morning, he first came to the canteen of the group, ordered a few dishes, and then walked towards the dormitory area.

After arriving at the villa, Zhang Yi found that the door of Huang Xiru's bedroom was still closed, and there was no sound coming from inside. It was obvious that Huang Xiru hadn't woken up yet.

So Zhang Yi gently pushed Huang Xiru's door open, for fear of waking Huang Xiru inside.

But after he went in, he found that Huang Xiru had already woken up and was sitting on the bed looking at the scene outside the window sill.

"Sister Huang! You're up, come and eat quickly." Zhang Yi saw Huang Xiru who was sitting on the bed turn his head, so he said with a smile.

Hearing Zhang Yi's voice, Huang Xiru turned her pretty face, and said, "Mmm! I've slept all morning, it's enough!"

At this time, Huang Xiru's face was much less tired than when he just arrived in the morning. At the same time, the bloodshot eyes in his eyes were also much less bloodshot. It was obvious that although he had recovered after a morning's rest, he was still recovering. The so-called sickness comes like a mountain falling, and sickness goes like spinning silk,
Just sleeping for one morning, although it relieved her fatigue, it was not enough.

So he said, "Sister Huang, go and wash up first, after dinner, you can take another afternoon rest in the afternoon!"

"Well! I'll go to freshen up first, but I want to accompany you to the company in the afternoon, and I don't want to rest."

After finishing speaking, Huang Xiru got up from the bed, then blushed, picked up her coat and walked towards the bathroom.

not long?The sound of Huang Xiru's bathing water came from the bathroom, and Zhang Yi looked at the uneven figure on the frosted glass door of the bathroom, and the sound of splashing water, his heart felt hot, but then he moved away. Try to focus your attention elsewhere.

But he still couldn't take his attention away. In desperation, he walked to the window sill and looked at the stream outside, which was better.

Not long after, the sound of footsteps in the room pulled his gaze back from the outside.

As soon as he turned his head, Zhang Yi was stunned. At this time, Huang Xiru was wearing a white professional shirt, with long wet hair hanging on his shoulders, a delicate face, delicate skin, full lips, and a slender neck. Vessels can be seen faintly on the white and tender skin, crystal clear as jade, and the stunning face is not lacking in a heroic aura, but those bright phoenix eyes are revealing a trace of fatigue at this moment, which makes people immediately feel pity for her.

"Sister Huang! Let's eat first! After eating later, you can take a good rest in the afternoon. Don't be in a hurry to go to work, and tomorrow will not be too late!" After speaking, Zhang Yi pulled a stool beside him, Let Huang Xiru sit down.

After hearing Zhang Yi's words, Huang Xiru sat down without saying a word. It was obvious that he didn't plan to take a rest in the afternoon, otherwise she wouldn't have put on her current clothes just after taking a bath.

Regarding Huang Xiru's temper, Zhang Yi was also clearly aware that generally speaking, if there were no special reasons, Huang Xiru would not change his decision.

But looking at Huang Xiru's tired expression, he still didn't want her to be too tired.

(End of this chapter)