Super industrial overlord

Chapter 123 Overhauling the Production Line (Please Subscribe! 45)

After Zhang Yi and his colorful stone machinery factory successfully developed a high-precision bearing production line, even the government of Xian County held a special meeting for this purpose.

After all, this is the first ultra-high-precision bearing successfully developed by itself in China, and the manufacturer of this production line is still in their county. For the leaders of the county, this is definitely a full achievement.

Even after the meeting of the county government was held, many people did not leave. Instead, they smoked and chatted. The content of the chat was naturally about their Qicaishi Machinery Factory.

"Zhang Ming's son is really amazing. Even the large state-owned manufacturers in China have not succeeded in sending out such a production line. In other words, the production line they have also sent out is far inferior to this in terms of precision. The bearings produced by their production line for the first time, you must know that it has only been a few months since their factory started to develop this production line.'

"Who said it wasn't? When I just got the news from the director of the development zone office last night, I thought it was a rumor, but I didn't expect it to be true. Their production line has been successfully run for the first time. It's really amazing. "

"I'm really envious of Zhang Ming having such a son. Originally, when the Qicaishi Machinery Factory was in Zhang Ming's own hands, it was still half dead, but after it was in the hands of his son Zhang Yi, in less than half a year, With the current scale, my brat can't see anyone all day long, and he doesn't know where he is fooling around, if he can be half as good as Zhang Ming's son, he will be content."

"."

Colorful Stone Machinery Factory.

After the successful first run of the production line, the production line should have been disassembled to evaluate the condition of the production line after the first run, but due to the late time of the day and the night, everyone went out to celebrate until the next morning , the production line was disassembled.

It took a whole day and many top students in the factory to disassemble all the important parts of this production line.

And carefully check the wear condition of these important parts on the production line to see if there are any problems after the first run.

After all, a huge production line, no matter how good the designer is, cannot be perfect. After running, there will be some problems to some extent.

But the key point is, what problem is not serious, and what impact will it have on the production of the entire production line?Do you want to make some changes to the original design?
Test run?It was originally used to test the operation of the production line, as well as the comprehensive factors of manufacturing, assembly, materials and other aspects.

Of course, the dismantling of the production line is only to dismantle some important parts. It is impossible to dismantle the entire huge production line. Otherwise, even if it takes ten days and a half a month, the dismantling cannot be completed. .

After all, the production line is a huge whole. There are not only small high-precision parts, but also super-large and super-heavy parts. It is impossible to disassemble it for inspection.

After the key parts of the production line were disassembled, these school masters began to check the damage of these parts.

At the same time, on this day, Zhang Yi did not go out, but together with these top students, carefully cleaned and inspected the disassembled accessories.

To check these accessories, the first thing to do is to carefully clean these accessories with gasoline, etc. After cleaning, carefully check these accessories one by one.

When inspecting, the first thing to check is the appearance of these accessories, and check whether these accessories are deformed or damaged.

Their Qicaishi Machinery Factory had built a production line before, although it was only a production line for aerodynamic bicycles, but with the lessons learned from the past, Zhang Yi and the others focused on checking the bearings on the production line.

At the same time, this is a large-scale high-precision bearing production line. Therefore, many key parts of this production line rotate very fast and have high requirements for bearing performance. Therefore, the bearing inspection on these parts is the most careful.

Even during the inspection, Zhang Yi and the others put on white gloves, used a magnifying glass, and checked every groove, every steel ball, and every small detail on the bearing.

The entire production line has not been disassembled, but only these key parts have a lot of parts disassembled, and the time required to inspect these parts will also take several days.

This is still when no problems are found or there are not many problems. If more problems are found, the time required will be longer, even ten days and a half months.

Zhang Yi took the bearing in his hand and checked it carefully in front of the testing platform, and picked up a small flashlight and some testing instruments from time to time to check the bearing in his hand, and at the same time his brows frowned.

"Master Jiang, come here, there seems to be a problem with this bearing." Since Zhang Yi has been actively learning various mechanical knowledge from these top students in the factory during this period of time, his vision and level now have However, he couldn't judge the high-precision bearing in his hand for a while, so he said to Jiang Shuai next to him.

As the chief engineer of design and R&D of this production line, Jiang Sui is also very conscientious. He arrives in the workshop every morning before dawn, and is still in the workshop at [-] or [-] o'clock at night, and sometimes even He even eats and sleeps in the workshop.

After hearing Zhang Yi's words, Jiang Shuai walked over immediately, picked up the bearing in Zhang Yi's hand, and inspected it carefully.

Soon Jiang Shuai also discovered that there was something wrong with this bearing, because the color of one place inside the bearing was obviously much brighter than other places.

"Boss, this bearing is obviously unusable. This part should be the fastest running place on the production line, so a bearing like this still cannot withstand such high-speed operation.

If my guess is correct, there must be problems with bearings in several other high-speed places on this production line.

But fortunately, we have anticipated this situation a long time ago. During the trial run of the production line, we gave priority to producing this type of bearing. "After checking, Jiang Shuai said to Zhang Yi.

Then Zhang Yi and Jiang Shuai checked the other high-speed parts on the production line. Sure enough, as Jiang Shuai said, there were more or less problems with the bearings in these high-speed parts.

It's just that it's not as serious as the one checked before. Judging from the situation, even in these parts, the bearings on it can't last long. After all, the speed of these high-speed parts has reached tens of thousands of revolutions. Not what these bearings can handle. "

　Thank you; the flowers are not scattered, reward 1000 starting coins!
　　Thanks; wudg1789, reward 500 starting coins!
　　
　
(End of this chapter)