I have manual system
Chapter 2 Crafting the Dragon Blade
Chapter 2 Crafting the Dragon Blade
Although Qin Feng has never made these before, he still knows the basic steps, and there are instructions.
The first thing is to find out the length and width of the Genji Dragon Blade from the official website. These must be done in a one-to-one ratio, and there should be no mistakes or sloppy.
Ordinary people would definitely not be able to see it, but Qin Feng felt that the system must know it, so it's better to be careful.
"Well... this knife is so long, I'll draw a line first..."
After drawing the line on the Dallaro steel plate, Qin Feng immediately moved the cutting machine provided by the system. This is a special cutting machine, and only this kind of cutting machine can cut the Dallaro steel plate.
When the cutting machine started, the sound was surprisingly low, but it was also a good thing. After all, I lived in a rental house, and the neighbors would definitely complain if the sound was too loud.
The cutting machine cuts the steel plate like a piece of paper. It seems a very simple thing, but when Qin Feng started to do it himself, he realized that it is so difficult...
Although the line is drawn, it is also a technique to cut according to the line. Sure enough, no matter what you do, it is not easy. Watching the video, people just face the line at random. When I came here, I cut it several times. is crooked...
The most important thing is that the dragon blade belongs to the knife, so it is that kind of arc. When cutting, it must be strictly followed by the line. If there is a slight mistake, it will not work.
Finally, after wasting 13 yuan of steel plates and cutting for a full eleven hours, Qin Feng cut the rough shape.
"It's so tiring. It's been a week. The system is really prone to problems. Those other up owners have spent at least ten or 20 days to do it..."
Although I don't have to shoot and edit myself, the time is still too tight.
It was past eleven o'clock in the evening, Qin Feng sat down to rest for a while, and was also hungry, so he made a bucket of noodles for himself, and then habitually called up his own panel.
"what?"
It was Qin Feng who suddenly discovered that his character panel had changed!
Name: Qin Feng
Sex: Male
Manual level: 1 (probably equivalent to the kind that can stack paper airplanes)
Experience: 2/100
Evaluation: Manual Xiaobai
The experience has actually changed from zero to 2, so this means that as long as you are making something, you can get experience regardless of success or failure!
And looking at the situation, you can level up when you reach [-] experience points, which is finally a bit of a stretch, or you might think that you can only get experience points by completing tasks.
After Xilihulu finished eating the noodles, Qin Feng started working again.
After cutting, it only has a general shape. If you want to make the whole material close to the appearance of the dragon blade, you need to polish it, and it is the kind of extremely fine grinding.
After drawing the line again, Qin Feng started the grinder.
With the buzzing rotation of the grinding wheel, the surroundings of the material were polished smooth, and at this time, the appearance of the dragon blade could already be seen.
As the night gradually darkens, Qin Feng is still polishing carefully. This step also requires slow work and careful work, not fast.
The main reason is that Qin Feng's technique is too poor, and if he is too fast, he will not be able to master it, so it is better to take his time, and he would rather go slower than rough work.
That is to say, Qin Feng is fully invested in it now, otherwise he himself will be surprised, why he has worked so hard now, sure enough, men have a handicraft gene in their bones...
…………
"Huh... ah, is it dawn yet? So fast!"
It was Qin Feng who finally polished the whole knife halfway before he realized that it was already nine o'clock in the morning.
So I spent the whole night in a row, but I didn't notice it at all. Hearing the humming sound of the grinder, I still felt an inexplicable harmony.
It seems that I was born to do handicrafts...
The thing is only a semi-finished product, and I feel sleepy now, and I need to rest for a while, so Qin Feng went straight back to the bedroom to sleep.
As for the class... Sorry, there is no spirit of class now.
It was already 5 o'clock in the afternoon when I woke up. I walked out of the bedroom feeling refreshed. I thought about ordering a takeaway, but after thinking about it, I decided to forget it. It took [-] minutes for the instant noodles and boiled eggs to be ready. .
It took 10 minutes to finish a meal, and after a brief tidying up, Qin Feng started making again.
Still the same sentence, grinding requires slow work and meticulous work, Qin Feng started to grind slowly again, but even though he was already very careful, there was still a problem when grinding the part close to the blade.
Because I lost my mind a little bit, I have already ground in a little bit and passed the line.
"Fuck, I have to do it again now, it's really a husky day!"
This is what Qin Feng thought at the beginning, as long as there is a small mistake, he will start over. After all, this is the system, and he did not expect to be able to play tricks in front of the system.
He took out another steel plate, which is still a familiar process, first cutting and then polishing.
This time it went smoothly, and the cutting was successfully completed at twelve o'clock in the evening.
Looking at the materials in front of him, Qin Feng said to himself: "Be careful this time, and there will be absolutely no problems!"
I didn't sleep all night last night. Although I made up for a while today, I was still a little sleepy. In addition, I couldn't escape tomorrow's class, so Qin Feng decided to go to bed early today.
The next day, he got up early, went directly to school and ordered it, and then ran away, ignoring what other students thought. Now his mind is full of his own Dragon Blade.
I ate a little something downstairs, and started polishing directly when I got home.
Generally speaking, things like swords are either cast or cast directly in a mold, but the direct cast will not be so strong.
Either it is forged, steel and steel are forged together, soft and hard, hard and tough.
But that kind of cost is too high, and things like hand-made things are generally made of plastic materials.
But the figure made by Qin Feng is too hard-core. It is required by the system to use steel, and it belongs to the kind that directly uses a large steel plate to dig out a dragon blade.
It is hard enough, and the hand feeling will be much stronger than those ordinary figures, but it is a bit difficult to make, after all, he is only one person.
Three days, three full days, Qin Feng didn't go out again, he ate instant noodles when he was hungry, drank some water when he was thirsty, shut himself at home and concentrated on polishing, and finally polished it!
At this moment, the prototype of a dragon blade has appeared!
Even without those decorations, without the handle, this knife alone looks like a work of art!
The shocking appearance of Dallaro steel makes Qin Feng love it.
The hardest part is done, the rest is easier.
By the way, this book has been internally signed, if you want to invest, you can vote for it!
(End of this chapter)
Although Qin Feng has never made these before, he still knows the basic steps, and there are instructions.
The first thing is to find out the length and width of the Genji Dragon Blade from the official website. These must be done in a one-to-one ratio, and there should be no mistakes or sloppy.
Ordinary people would definitely not be able to see it, but Qin Feng felt that the system must know it, so it's better to be careful.
"Well... this knife is so long, I'll draw a line first..."
After drawing the line on the Dallaro steel plate, Qin Feng immediately moved the cutting machine provided by the system. This is a special cutting machine, and only this kind of cutting machine can cut the Dallaro steel plate.
When the cutting machine started, the sound was surprisingly low, but it was also a good thing. After all, I lived in a rental house, and the neighbors would definitely complain if the sound was too loud.
The cutting machine cuts the steel plate like a piece of paper. It seems a very simple thing, but when Qin Feng started to do it himself, he realized that it is so difficult...
Although the line is drawn, it is also a technique to cut according to the line. Sure enough, no matter what you do, it is not easy. Watching the video, people just face the line at random. When I came here, I cut it several times. is crooked...
The most important thing is that the dragon blade belongs to the knife, so it is that kind of arc. When cutting, it must be strictly followed by the line. If there is a slight mistake, it will not work.
Finally, after wasting 13 yuan of steel plates and cutting for a full eleven hours, Qin Feng cut the rough shape.
"It's so tiring. It's been a week. The system is really prone to problems. Those other up owners have spent at least ten or 20 days to do it..."
Although I don't have to shoot and edit myself, the time is still too tight.
It was past eleven o'clock in the evening, Qin Feng sat down to rest for a while, and was also hungry, so he made a bucket of noodles for himself, and then habitually called up his own panel.
"what?"
It was Qin Feng who suddenly discovered that his character panel had changed!
Name: Qin Feng
Sex: Male
Manual level: 1 (probably equivalent to the kind that can stack paper airplanes)
Experience: 2/100
Evaluation: Manual Xiaobai
The experience has actually changed from zero to 2, so this means that as long as you are making something, you can get experience regardless of success or failure!
And looking at the situation, you can level up when you reach [-] experience points, which is finally a bit of a stretch, or you might think that you can only get experience points by completing tasks.
After Xilihulu finished eating the noodles, Qin Feng started working again.
After cutting, it only has a general shape. If you want to make the whole material close to the appearance of the dragon blade, you need to polish it, and it is the kind of extremely fine grinding.
After drawing the line again, Qin Feng started the grinder.
With the buzzing rotation of the grinding wheel, the surroundings of the material were polished smooth, and at this time, the appearance of the dragon blade could already be seen.
As the night gradually darkens, Qin Feng is still polishing carefully. This step also requires slow work and careful work, not fast.
The main reason is that Qin Feng's technique is too poor, and if he is too fast, he will not be able to master it, so it is better to take his time, and he would rather go slower than rough work.
That is to say, Qin Feng is fully invested in it now, otherwise he himself will be surprised, why he has worked so hard now, sure enough, men have a handicraft gene in their bones...
…………
"Huh... ah, is it dawn yet? So fast!"
It was Qin Feng who finally polished the whole knife halfway before he realized that it was already nine o'clock in the morning.
So I spent the whole night in a row, but I didn't notice it at all. Hearing the humming sound of the grinder, I still felt an inexplicable harmony.
It seems that I was born to do handicrafts...
The thing is only a semi-finished product, and I feel sleepy now, and I need to rest for a while, so Qin Feng went straight back to the bedroom to sleep.
As for the class... Sorry, there is no spirit of class now.
It was already 5 o'clock in the afternoon when I woke up. I walked out of the bedroom feeling refreshed. I thought about ordering a takeaway, but after thinking about it, I decided to forget it. It took [-] minutes for the instant noodles and boiled eggs to be ready. .
It took 10 minutes to finish a meal, and after a brief tidying up, Qin Feng started making again.
Still the same sentence, grinding requires slow work and meticulous work, Qin Feng started to grind slowly again, but even though he was already very careful, there was still a problem when grinding the part close to the blade.
Because I lost my mind a little bit, I have already ground in a little bit and passed the line.
"Fuck, I have to do it again now, it's really a husky day!"
This is what Qin Feng thought at the beginning, as long as there is a small mistake, he will start over. After all, this is the system, and he did not expect to be able to play tricks in front of the system.
He took out another steel plate, which is still a familiar process, first cutting and then polishing.
This time it went smoothly, and the cutting was successfully completed at twelve o'clock in the evening.
Looking at the materials in front of him, Qin Feng said to himself: "Be careful this time, and there will be absolutely no problems!"
I didn't sleep all night last night. Although I made up for a while today, I was still a little sleepy. In addition, I couldn't escape tomorrow's class, so Qin Feng decided to go to bed early today.
The next day, he got up early, went directly to school and ordered it, and then ran away, ignoring what other students thought. Now his mind is full of his own Dragon Blade.
I ate a little something downstairs, and started polishing directly when I got home.
Generally speaking, things like swords are either cast or cast directly in a mold, but the direct cast will not be so strong.
Either it is forged, steel and steel are forged together, soft and hard, hard and tough.
But that kind of cost is too high, and things like hand-made things are generally made of plastic materials.
But the figure made by Qin Feng is too hard-core. It is required by the system to use steel, and it belongs to the kind that directly uses a large steel plate to dig out a dragon blade.
It is hard enough, and the hand feeling will be much stronger than those ordinary figures, but it is a bit difficult to make, after all, he is only one person.
Three days, three full days, Qin Feng didn't go out again, he ate instant noodles when he was hungry, drank some water when he was thirsty, shut himself at home and concentrated on polishing, and finally polished it!
At this moment, the prototype of a dragon blade has appeared!
Even without those decorations, without the handle, this knife alone looks like a work of art!
The shocking appearance of Dallaro steel makes Qin Feng love it.
The hardest part is done, the rest is easier.
By the way, this book has been internally signed, if you want to invest, you can vote for it!
(End of this chapter)
You'll Also Like
-
Douluo: I, the judgment of destruction, the divine skill to destroy the world
Chapter 281 9 hours ago -
Douluo: I am the God King of Healing
Chapter 194 9 hours ago -
After I Hanged Up, I Became the Strongest Beast Master
Chapter 242 9 hours ago -
My Achievements are a bit Abstract
Chapter 250 9 hours ago -
Swear Fealty To Me, My Subjects!
Chapter 540 9 hours ago -
Games with fairies
Chapter 309 9 hours ago -
Dragon Ball Super: Exposed! I'm a super saiyan
Chapter 197 9 hours ago -
I can gain experience points in Genshin Impact
Chapter 644 9 hours ago -
I'm the Master of the Yellow Springs
Chapter 492 9 hours ago -
How can I become an immortal just by playing a game?
Chapter 358 9 hours ago