Get black technology from Meiman

Chapter 79 On 3D Printer Printing of Goddesses and Goddesses (recommended tickets for collection)

In the background of Bilibili, there are constant private messages.

Most of them were reminders from fans, and some technical parties asked about the technical process.

There are also some invitations from various platforms, hoping to cooperate.

There are even several well-known brands.

Because Lu Cheng didn't announce his contact information on the platform, they could only contact through private messages.

"It seems that a popular video has a greater influence than I imagined." Lu Cheng couldn't help but secretly sighed.

He looked at the number of fans again.

In just half a day, the number of fans has increased by another 30, becoming [-]!
The playback volume also reached 150 million.

As for the technology points, it has been increased by 1000 again, reaching 7000 points.

but.

Lu Cheng knew that the video was recommended and exposed a few days ago, so there was a short-term explosive growth.

After a few days, the popularity will decrease, and the number of broadcasts and fan growth will gradually stabilize.

Lu Cheng responded to some private messages a little, and then devoted himself to the production of the exoskeleton armor again.

Before, he only made the mechanical limbs, and he did not make the helmet, breastplate and the driving device behind it.

With the robot knowledge learned from "Big Hero [-]", this unfinished part can just be enriched.

Simultaneously.

Lu Cheng also bought some materials needed to make a 3D printer online.

Except for the special ink benzene tin that needs to be upgraded with technology points, the rest of the materials can be found in the world or substitutes.

After working hard for two days, Lu Cheng finally made the breastplate of the mechanical exoskeleton.

After wearing it with mechanical limbs, it looks even more handsome.

Feeling like a future soldier!
However, Lu Cheng did not publish the video immediately.

He plans to release all the equipment together after finishing.

In this way, the effect can be more shocking.

In this way, ten days passed.

Lu Cheng finally produced a full set of exoskeleton armor.

At the same time, the relevant materials for making 3D printers have also been purchased one after another.

According to the relevant blueprints in his mind, Lu Cheng started to assemble the 3D printer.

Build the frame, set the program, sand the material.

It took a full day to finally make the finished product!
It is a device three meters wide and five meters high.

The appearance is a bit similar to ordinary printers, but it is much more complicated than ordinary printers.

At the top is the material input port. After the materials are put in, the system will go through internal inspections and classify these materials into various areas!
Then, import the modeled 3D map, set the relevant scale, and start printing.

The printed finished product will be slowly generated from the outlet made of special nanomaterials below!

If the height or width of the model exceeds the capacity of the 3D printer.

The 3D printer will print layer by layer according to the modeling, and the rest need to be assembled by yourself.

of course.

The width and height of the 3D printer can also be adjusted by itself.

Because Lu Cheng only needs to print artificial limbs now, there is no need to make the 3D printer too large.

"Try the effect."

Lu Cheng imported the designed 3D model inflatable doll of Teacher Tian Haiyi into the 3D printer.

Then, the related materials were also put into the material port, and the start button was pressed.

blah blah-

Soon, the 3D printer lit up and started printing.

5 minute later.

With the sound of 'ding', the inflatable doll was slowly made out of the exit.

Lu Cheng opened the finished product warehouse, carried the inflatable doll out, and began to examine it carefully!
"It's so perfect, it's almost like a real person." Lu Cheng was amazed.

3D printers are amazing.

Perfectly reproduced every detail of Mr. Tian Haiyi.

The proportions of each item are also very accurate, almost the same as the modeling graphics.

Once this product is launched, it must be good news for otaku.

Those Two-dimensional wives can almost perfectly appear in the real world through 3D printing!
No longer in fantasy.

"Ahem, Xi'er still can't see this thing." Lu Cheng coughed dryly.

He quickly put the inflatable doll into the material port, and then pressed the factory reset button.

Soon, the inflatable doll was fed into the 3D printer.

After a while, it became raw material again.

Of course, the amount of material is reduced.

When making the inflatable doll just now, it is impossible to use all the materials.

Some excess materials will be sent to the waste bin of the 3D printer.

"Compared to exoskeleton armor, this is black technology!" Lu Cheng secretly sighed.

If this 3D printer technology is made public, it will definitely bring about earth-shaking changes in the production and processing industry!
Not only can the modeling drawings be perfectly reproduced, but the production time is also very short.

"Ten days have passed, and it's time to publish the second video of the series from scratch."

Lu Cheng put the 3D printer in the garage, and then began to make and edit the exoskeleton armor.

After ten days of fermentation.

The popularity of the video also gradually decreased, and the final playback volume was fixed at more than 300 million.

Fans increased to 50.

One video, attracting 50 followers, can already be called a phenomenon!
After all, some up masters may not be able to have this number of fans even if they try to update for a year or two.

Lu Cheng looked at the playback volume of other platforms. Although it is not as high as Bilibili, it still has a considerable playback volume.

Adding up the whole network, the playback volume has almost exceeded [-] million!

Correspondingly, the technology points also increased by 3000 points.

However, because Lu Cheng used 3 technology points to make the 2000D printer, his current technology points are still only 7000.

"It's really useless. We must earn some technology points as soon as possible. When the company is officially established, a 3D printer alone will definitely not be enough."

Lu Cheng did not delay any longer, and began to devote himself to the production and editing of the exoskeleton armor video.

after one day.

The second video of the series from scratch was officially published.

The title is: From Scratch Beyond Skeleton Armor Complete Edition.

Just sent it out less than 10 minutes ago.

The playback volume quickly exceeded [-].

A barrage of bullet screens was also brushed up.

"He's here, he's finally here with black technology!"

"Ah, this time it turned out to be the full version, as expected of a conscientious up master."

"The trick is here, what kind of trick are you going to open this time?!"

"I don't need any skills to do black technology, as long as I open it!"

Lu Cheng was a little dazed looking at the full screen of the subtitles of "Hang Bi", and immediately reacted.

A previous comment asked what skills are needed to make exoskeleton armor, and he replied: No skills are needed, just open it.

Unexpectedly, it was directly played as a meme.

I have to say that the ability of sand sculpture netizens to see through stitches is quite good.

However, after the trouble, many netizens turned their eyes back to the video after they finished joking.

When they saw the new functions of the exoskeleton armor, they couldn't help being shocked again!

　Thanks for the 3000 coin reward from the book friend 'Quick r update A new r', thank you for your support, id praise, the update is coming.

　　
　
(End of this chapter)