God-level Miner

Chapter 545

The safety door of the CNC machine tool was opened, someone skillfully removed the alloy milling cutter with tools, and handed it to Yu Wei.

At this time, Yu Wei's mood is not calm, success or failure depends on one move, if successful, Diamond Cutting Tool Group will usher in a brand new tomorrow, if it fails, Diamond Cutting Tool Group will go into decline, and its glory will no longer be.

Holding this alloy milling cutter, Yu Weizai looked at it carefully. Everyone's eyes were also focused on this milling cutter. Experts watch the doorway, and laymen watch the fun. Yu Wei is obviously an expert. After looking at it, The heart became more restless.

As soon as he stretched out his hand, seeing the situation, someone next to him understood immediately, and brought over a magnifying glass. Yu Wei used this magnifying glass to look at it carefully for at least a minute. It can be said to be very careful. After watching for so long, he stopped. .

There was a vice president next to him, who immediately asked nervously, "Boss, how are you doing?"

Yu Wei didn't make a comment, didn't say good or bad, but gave this alloy milling cutter to the vice president of technology next to him, "Further testing will be carried out immediately, I want to see the report."

The technical vice president nodded vigorously, and immediately arranged several technical backbones to inspect it next to him, using very advanced equipment.

As one of the leading domestic cutting tool companies with an annual sales of 200 to [-] billion, Diamond Cutting Tool Group has very advanced tool testing instruments and very mature testing methods.

These key technicians immediately installed the alloy milling cutter on the instrument. This is an imported tool detector. When the blade of the alloy milling cutter is magnified a hundred times, everything can be seen clearly. Blade wear, bonding, etc.

"This, it's impossible!"

Everyone looked at the display screen of this tool tester almost holding their breath, and many people exclaimed when they saw the blade condition of the alloy milling cutter on the screen.

The blade is magnified a hundred times, and everything can be seen clearly. Everyone can see that the blade is as new, and it cannot be seen that the blade has been processed by a series of parts and cut a lot of metal.

Someone said loudly: "Guo Gong, you must have misread the blade."

General alloy milling cutters generally have a lot of small blades, and each small blade has multiple blades. Some people worry that it is a mistake, and the blades that have not been used are being tested.

Guo Gongdao: "It's not wrong, we have a serial number. Besides, if you look carefully, the blade also has some slight wear and tear. This is very, very slight. It's hard to see if you don't look carefully."

No matter what kind of tool is used to process parts, it has a service life. As the processing time becomes longer, a series of conditions such as wear, sticking, blackening, etc. will gradually appear. The longer the processing time, generally these The more serious the situation is, when it is serious enough to affect the processing quality of the parts, the tool will be scrapped.

Undoubtedly, the longer the service life of the tool, the better its quality, which is an important quality parameter.

"My God, it's unbelievable!"

Seeing such a situation, many people exclaimed, everyone has been engaged in knives for a lifetime, and this is probably the first time they have encountered such a situation.

Yu Wei also blushed. Even as the president of the Diamond Cutting Tool Group and in front of so many subordinates, Yu Wei really couldn't control himself not to be excited. The quality of the hard alloy steel of Sanlian Special Steel is so good. Beyond Wei's imagination.

As a senior knife manufacturer, Yu Wei knew that with such excellent cemented carbide steel, it was time for his diamond knife group to show its talents, not only to regain the previously lost market share of medium and high-end tools, but also to We also have to go abroad to expand our territories.

The test and analysis report came out soon. The alloy milling cutter made of hard alloy steel of Sanlian Special Steel Group has a life span of two to three times longer than that of similar imported milling cutters.

Not only the service life is greatly extended, but the processing quality of the parts is also very perfect. The surface quality of the processed test piece on the CNC machine tool is very good, and the size is also completely qualified.

It can be seen that the alloy milling cutter just now is much better than the imported alloy milling cutter of the same type. If it is introduced to the market in large quantities, it will definitely be a hot item.

Sanlian Special Steel Group ordered hard alloy steel worth one billion yuan, which can not only make alloy milling cutters, but also mass-produce all kinds of cutting tools, such as turning tools, drills, boring tools and so on.

Yu Wei clenched his fists tightly and said loudly in his heart: "I want to do a big job and let the world know that the best knives in the world are made by us in China!"

Such bold words were shouted in Wei Wei's heart.

At the same time, Yu Wei was very grateful to Sanlian Special Steel Group and Wang Xudong. It was because of such excellent hard alloy steel that he was saved from fire and water. He said that Wang Xudong was the benefactor of the entire diamond cutting tool group. Not exaggerating.

"Well, if you find a time, you have to come to the door to thank them in person." Yu Wei said in his heart.

At this time, Wang Xudong was thousands of miles away in Australia, and he fought a beautiful turnaround. The international iron ore procurement and negotiation conference jointly organized by Biehe Mining Group and Lituo Mining Group ended dismal. The mining group failed to harvest.

.........

Australia, BHP Mining Group headquarters.

The conference was anticlimactic, and such a big joke was made in the world's mining industry. Duo Lun and others were completely humiliated and became the laughing stock of their peers in the mining industry. left Pace.

Duo Lun also went back to his headquarters of Biehe Mining Group. After he came back, he almost stayed behind closed doors, because he knew that if he showed his face again at this time, he would lose face again. It is estimated that some colleagues would look at him differently.

Hiding in his office, however, he did not relax his attention to Xudong Mining Group, and sent people to secretly inquire about the movement of Xudong Mining Group.

Knowing that the heads of these Huaxia Steel Enterprises visited the No. [-] and No. [-] mines in Australia under the leadership of Wang Xudong, he was very angry. It will not order iron ore from Bhutan Mining Group, but it will definitely order iron ore from Xudong Mining Group.

At the same time, Duo Lun was unwilling and thought fiercely, with so many orders, it would be best to support Xudong Mining Group to death, hum!
As the president of BHP Mining Group, Duo Lun naturally knows the amount of iron ore that China needs to import every year, and also knows the current scale and production capacity of Xudong Mining Group. With so much iron ore, Duo Lun naturally hopes that Xudong Mining will The group couldn't eat it.

If it is really impossible to take so many iron ore orders, then there will be a good show.Duo Lun thought so hard in his heart.

Outside the office door, there was a knock on the door, and it was Duo Lun's assistant who pushed the door in, holding a sample of iron ore and a test report that had just come out.

If there are people from Xudong Mining Group here, they will definitely be very familiar with this iron ore sample when they see it. Why is this crimson iron ore so familiar?

This iron ore sample is the iron ore of Xudong Mining Group. It is not difficult to obtain such an iron ore sample.

Duo Lun naturally also heard about the quality of iron ore from Xudong Mining Group. He didn't believe it, so he asked his assistant to get some samples and test them carefully. These things have now been done, and his assistant Bring things over.

"Mr. President, this is the iron ore sample from Xudong Mining Group, and this is the iron ore inspection report." After speaking, he put these things on Duolun's desk and stood aside.

Duo Lun nodded, took out a magnifying glass, and first looked at these iron ore samples. After looking at them, his face changed slightly. Obviously, he saw that these iron ore were extraordinary, that is, they were very special. high quality.

After looking at these iron ore samples, Duo Lun picked up the test report and looked at it again. After looking at it, his face changed again, and he asked loudly: "How is this possible? Did you make a mistake? Take it back and retest, what I want is real data."

The assistant said helplessly: "Mr. President, at the beginning, we also thought that the data was wrong, so we tested it several times, and it is true. Although the grade of these iron ores is not very high, its harmful elements There are almost none, but the beneficial elements are very rich. In addition, we have tested a total of more than a dozen samples, and the results obtained are almost very similar, which shows that there is not much difference in the iron ore of Xudong Mining, and its quality is very stable."

Iron ore grade is only one aspect of quality, and there are many other indicators. The terrible thing is that apart from the high grade of iron ore from Xudong Mining, other indicators are also very perfect.

There is nothing wrong with the data!
Duo Lun's face gradually turned ugly, and he tore the test report into pieces with force, and threw it on the ground, which shows the anger in Duo Lun's heart at this time.

Now at this time, Duo Lun's sense of crisis is unprecedentedly strong. Knowing that Xudong Mining Group is developing so fast and still has such high-quality iron ore, Duo Lun knows that if no measures are taken, Xudong Mining Group will definitely surpass Any mining company in the world, including BHP Mining Group, thus takes the position of the leader of the world's mining companies.

Taking advantage of the fact that Xudong Mining Group has not yet fully developed, all means must be taken to kill it in its infancy.This is what Doron is thinking at the moment.

It seems that the lesson is not enough, and it is not tragic enough. He didn't learn the lesson, thinking about how to take measures and measures to deal with Xudong Mining Group.

I don't know what method this Duo Lun will adopt, and who will win in the end. At this time, Wang Xudong is in Pace.

Among the five-star hotels.

Wang Xudong has been waiting for the statistical results in his presidential suite. This afternoon, Chang Jianliang arranged for someone to count the amount of iron ore that everyone needs next year. Looking at the time, the results should be coming soon.

Not long after, Chang Jianliang looked happy, knocked on the door and came in with a list in his hand.

....
The third one is here!

(That’s all for today’s update, thank you everyone!)

(End of this chapter)