God-level Miner

Chapter 178 Niucha's System

Donghai City, International Convention and Exhibition Center.

The "International Iron and Steel Industry Summit Forum" was held here. In the huge lecture hall, there were no empty seats. Wang Xudong, Chen Sanlian, etc. sat here to listen to some big names in the iron and steel industry give reports, analyze the future development prospects and trends of the iron and steel industry, and analyze the current situation. The problems faced by the steel industry and so on.

Although it is relatively boring, after listening to the report, Wang Xudong also knows that under the pull of China's strong economic development, at least the next one or two years will be the peak of the development of the entire steel industry. There will be a small increase.

Of course, there is also a big coffee analyst who pointed out that the major domestic steel industries have expanded their production scales, the traditional steel production capacity will gradually become surplus, and the emerging special steel industry will be the general trend of development. This point is similar to Chen Sanlian and Wang Xudong. The inferences of the two are basically consistent.

Although Wang Xudong does not engage in steel, he is a big mine owner who is also very concerned about the steel industry. The development of the steel industry is directly related to the demand and price of iron ore.

Of course, it is not so easy to enter the new type of special steel industry. It has higher technical requirements, requires a large number of professionals, and requires strong technical strength.

Chen Sanlian wants to develop in this direction, so that Sanlian Iron and Steel can gradually transform and upgrade, but Chen Sanlian also faces huge difficulties, that is, the technical foundation is weak, and it is relatively difficult to produce high-quality special steel that meets market needs.

Zheng Xiaotong sat next to Wang Xudong. Although he felt that the report was boring, Zheng Xiaotong was very well-behaved and quiet. It was really boring. Zheng Xiaotong would play with his mobile phone to pass the time.

This kind of report lasts for a whole day, and the second day is mainly an exhibition. Many domestic and international powerful steel companies exhibit their products. Research results, some of the latest special steel products, etc.

To be honest, Wang Xudong is most interested in tomorrow's exhibition. However, the exhibition will not start until tomorrow, so today he can only sit here patiently and listen to those big names in the steel industry "talking about swords in Huashan" on stage.

Wang Xudong thought in his heart, maybe one day, when he is strong enough, he will also be invited to speak as a big name when the World Mining Summit Forum is held. It is probably a great thing to be able to speak up.

However, Wang Xudong also has self-knowledge. His current scale and strength are still far behind those large international mining companies, and the road to development is still relatively long.

On the first day, Wang Xudong patiently listened to the report for the whole day, while Chen Sanlian was more patient than Wang Xudong. Not only did he listen all day long, but he also took a notebook and recorded many things. Twenty or thirty pages.

Wang Xudong even admires Chen Sanlian a little bit. He is still so dedicated at such an age. This is probably one of the reasons why Chen Sanlian can start from scratch and establish such a large-scale steel group. With this spirit, nothing can be done.

The second day is the exhibition, of course, it is also a business promotion meeting. It is estimated that many contracts will be signed between some enterprises and merchants. Wang Xudong is also interested in this exhibition.

At [-] o'clock in the morning, Wang Xudong took Zheng Xiaotong, together with Chen Sanlian and his son, and everyone came to the exhibition center early. When the time came and the gate opened, everyone followed the crowd into the exhibition hall.

"Brother Dong, it's very lively here, the exhibition hall is so big!"

Sitting there listening to the report yesterday was probably a bit boring, but today when I came to the exhibition, everything was much fresher. As soon as I came in, Zheng Xiaotong shouted in surprise.

It is very lively here. Not only are there many companies participating in the exhibition, but there are also more visitors. Even a large number of citizens of Donghai City came to take a look at the excitement. To various reporters.

Chen Sanlian also said: "Xudong, this is an eye-opener. Look, there are actually such alloy steel exhibits."

In front of the booth of a certain foreign steel company, Chen Sanlian stopped, with great interest, and pointed to a certain brand of new alloy structural steel exhibited by this company.

This kind of alloy structural steel is widely used in the manufacture of key structural parts of automobiles, and also in the manufacture of important structural parts of all mechanical equipment. The market demand is very large.

Chen Sanlian was envious, and thought in his heart, it would be great if his own Sanlian Iron and Steel Group could produce this kind of alloy structural steel.

It's a pity that Chen Sanlian can only think about it this way. Chen Sanlian knows that his own Sanlian Iron and Steel Group does not have such strength, and can only produce high-end products, focusing on traditional steel.

Wang Xudong also came up enthusiastically, watching the introduction of this alloy structural steel with great interest, and even, Wang Xudong quietly activated the "God-level mine owner" system.

After the system was upgraded to the fourth level, two new functions were added. One is the "analysis" function, which is mainly for the analysis of metal materials, such as various steel materials, various alloys, etc. As long as there are samples, the metal samples can be analyzed. Analyze and obtain a series of data of the metal, such as composition, strength parameters and so on.

The other is the "generate" function. After analyzing a certain metal material, if you feel that the metal material is okay and want to smelt it, you can use the "generate" function to generate a complete set of smelting and manufacturing of this metal material. craft.

After reading the introduction of this alloy structural steel, it is not only a high-end special steel, but also can be widely used in automobiles, machinery and other fields, Wang Xudong was a little moved.

The alloy structural steel exhibited in this booth is spread on the booth with red silk cloth. On the red silk cloth are some samples of this alloy structural steel, including bars and several plates. This is a good chance.

Wang Xudong activated the analysis function of the "God-level mine owner" system and began to analyze this alloy structural steel. Immediately, the analysis progress bar began to appear. About ten seconds later, the voice of miner No. [-] rang in Wang Xudong's mind.

"Brother Dong, after the analysis, do you want to use the 'generate' function to generate the complete smelting process of this steel immediately?"

It can be generated immediately, or it can be generated after a period of time to generate a full set of smelting technology. Wang Xudong knows this.

Wang Xudong said to Miner No. [-]: "The generation of the smelting process will not be carried out for the time being."

"Yes, Brother Dong."

Miner No. [-] faithfully carried out Wang Xudong's order, and temporarily stored the analysis data of this metal material, and called it up when Wang Xudong needed it.

Wang Xudong was rather curious. Since the system can generate a complete set of smelting processes for this kind of alloy structural steel, is the set of processes generated by the system the same as the original smelting process of this steel plant? If the processes are different, who is better and who is worse? .

This needs to be asked clearly. When Wang Xudong asked Miner No. [-], this time, Miner No. [-] answered clearly and proudly.

Miner No. [-] said: "Brother Dong, don't worry, if you use the 'generate' function, the whole set of smelting process generated is definitely better than the original set of smelting process of this iron and steel company, that is to say, in the future, the system will generate more This set of smelting process is used to smelt this alloy structural steel, and the products produced will be very high-quality products, whose quality is even better than the current samples of this alloy structural steel."

the student surpasses the master.

It was even better than the samples on display. Immediately, Wang Xudong was overjoyed and said in his heart, it is indeed a powerful system, but it is so amazing.

That being the case, don't rush to generate smelting process, because the number of times of generation is limited, and the number of times to use the "analysis" function can be relatively more. At present, the system can be used ten times in total when the system is at level [-], and "generate" Function can only be used twice.

Wang Xudong plans to analyze more metal materials among them, and then choose two complete smelting processes to produce these two metal materials.

With the complete set of smelting process generated by the system, Wang Xudong is confident that he will be able to smelt very high-quality metal materials, such as the alloy structural steel just now.

The quality of the same brand of steel is also different. Generally speaking, domestic materials are worse than imported materials. For example, for a certain brand of bearing steel materials, the life of domestic materials is only a quarter of that of imported materials.Quality defects such as uneven hardness of steel, large fluctuations in the control of carbon and oxygen content in steel, loose center and enrichment of inclusions are more common in domestic steel.

This is why Wang Xudong was so happy when he heard that the process generated by the system was better than the original process.The quality of imported metal materials is so good, it does not mean how advanced the foreign smelting equipment is, the biggest difference lies in the process.

If the smelting process is good, the quality of the smelted steel will naturally be good. If the smelting process is unreasonable and lacks in certain aspects, the quality of the smelted steel will be relatively poor.

The system is so awesome, Wang Xudong thought in his heart, then we can't waste this opportunity, we have to walk around, and when we see special steel materials that are more awesome, we must analyze them.

.........

It will take another week to consider putting it on the shelves, so that everyone can watch more free chapters and accumulate more collections slowly.

(End of this chapter)