God-level Miner

Chapter 1038

Goro Hashimoto!

Fuso people!
Wang Xudong couldn't help but recall the scene of the last car accident, the car that ran a red light and crashed into a car that was driving normally.

Fortunately, Lin Hu's driving skills are good and his reaction is fast enough, otherwise, Wang Xudong might be the one who got hit.Back then, Wang Xudong kindly called the police, called an ambulance for them, and briefly explained the situation to the traffic police.

Who knew that the Fusang man, that is, Hashimoto Goro, didn't appreciate it, and even warned Wang Xudong with his eyes, which made Wang Xudong very upset.

After giving an order, Lin Hu and He Xiaoyun launched an investigation together, and soon these materials were brought to Wang Xudong, who looked at them one by one.

After reading it, a slight sneer appeared on the corner of his mouth. To clean up a Fusang man like Hashimoto Goro, Wang Xudong didn't need to do it himself, a phone call was enough.

So Wang Xudong dialed an overseas phone number and called Hiromasa Ando of the Itanium Consortium.In the eyes of outsiders, this Iteng consortium is currently the most famous consortium in Fusang. In fact, its head, Hiromasa Ando, ​​completely obeys Wang Xudong.

When the call was made, Wang Xudong briefly explained the situation, and An Teng Guangzheng knew exactly what to do.

What goes around comes around.

This Hashimoto Goro is not a good guy either. During his tenure as the representative of their machine tool company in Huaxia, he was often domineering, and many people have long been displeased with him.

Like Liu Fudong of Geely Automobile Group, he was so angry that his face was almost blue, and a pencil was broken abruptly.

Not long after Wang Xudong made this call, the product launch conference of Shanhe Machine Tool Equipment Co., Ltd. was about to start at Dahan International Hotel in Lucheng City.

The huge hall is very noisy, because everyone can't be quiet!
The guests who participated in this product launch will be warmly guided by the staff as soon as they enter the lobby, sit at the designated position, and then will send a beautiful introduction.

High-definition printing, with both pictures and texts, not only the introduction of Sunward Machine Tool Equipment Co., Ltd., such as when it was established, how much registered capital, how many employees, how big is the factory, etc.

This is not the main point, the key is that a large part of this information is the introduction of the large-scale five-axis linkage CNC machining center.

If there are several color pictures of this machine tool, there are also introductions of performance and parameters, etc., which are very detailed.The guests who came to this conference were either customers who needed this kind of machine tools, or persons in charge of related machinery manufacturing enterprises.

In other words, these guests are not laymen, and they know some basic knowledge of CNC machine tools. After everyone got this introduction, they sat in their seats and watched it before the product launch officially started.

This is incredible, the whole hall can be quiet!
"This can't be a decimal point printed wrong, the precision is so high!"

"This is a rhythm that goes against the sky!"

"..."

From time to time, there was a sound of gasping for air. Seeing this CNC machine tool in the introduction materials, everyone knew that this was definitely the top, best, and most outstanding five-axis linkage CNC machining center in the world.

Of course, the premise is that there is no bragging.

Will you brag?

Certainly not, because Shanhe Machine Tool Equipment Co., Ltd. is a wholly-owned subsidiary of Shanhe Heavy Industry Group, and the brand of Shanhe Heavy Industry is there, and people will definitely not brag.

"It's amazing, I didn't think about it, we can actually produce such an excellent CNC machining center in China!"

This is a gray-haired old professor who specializes in machine tool research. He thought he could not develop such an advanced machine tool. His eyes were full of excitement.

Manufacturing the world's top CNC machine tools is probably the common dream of several generations in China, and it is also the goal that the old professor and others are striving for. I never imagined that in my lifetime, I could see the world's most advanced CNC machine tools manufactured in China. machine tool.

Sure enough, Liu Fudong came in person, with his assistant and a vice president. The three of them sat in the guest area, and each of them had a copy of this introduction material, watching excitedly.

Liu Fudong found that his hand holding this introduction was trembling a little, so he quickly took a deep breath and said happily: "Great, it is also a five-axis linkage CNC machining center, and Fusang people's things are really only in front of this machine tool." It can be regarded as scum.”

"President, we are blessed. With such a good CNC machining center, the key parts needed for our new model will definitely be processed."

This is for sure. This is the best five-axis CNC machining center in the world. Even if it is considered military-grade, it is not as good as this machine tool.

nine in the morning.

Amidst the click of spotlights, He Yehui and several senior executives of Sunward Heavy Industry Group, as well as several senior executives of Sunward Machine Tool Equipment Co., Ltd., walked into the hall along the red carpet.

The product launch event was hosted by Gao Yiyong!
First, He Yehui gave a speech, warmly welcome everyone to participate in this product conference, and then Gao Yiyong personally introduced this product.

The introduction materials have been prepared a long time ago. Using a projector, it is very clear. Gao Yiyong seems to be a little nervous, no, it should be said that he is a little excited, and introduces this CNC machine tool to everyone in a trembling tone.

After one or two minutes, Gao Yiyong also gradually entered the state, and his tone became much calmer.The originally noisy hall gradually quieted down, except for the occasional sound of breathing.

....
in the office.

Wang Xudong was watching the live broadcast of Lucheng TV Station, and he could see the situation of the whole press conference clearly, and thought in his heart, it's good, it's really good.

The product is so good, the press conference was very successful.

After the product introduction, the main event begins. Customers who need this kind of machine tools will place orders with Shanhe Machine Tool Equipment Co., Ltd.

Of course, the signing of the order will not be broadcast live.

Wang Xudong didn't need to watch the live broadcast anymore, he just waited for He Yehui's report.

Lin Yunwen also received the invitation letter, but he is very busy and has no time to attend this product launch, but is busy with the production of his engine.

The problem was very difficult. He personally guided and used the other five-axis machining centers with slightly inferior performance to process the parts, and the processing quality was also not ideal.

Lin Yunwen frowned. It is impossible for him to stay in this factory all the time. He still needs to rush to the military to participate in the production of that large engine, which is the power of the military's largest transport aircraft.

Before leaving, Lin Yunwen held the hand of the chief engineer of the processing plant, and said slowly: "Old Xiao, the problem is left to you, I originally wanted to change the design and lower the design requirements, but you know, this way The overall performance of the engine will be affected, and you must ensure the processing quality of the parts."

The chief engineer felt very embarrassed and said: "To solve the problem of processing quality, the only way is to buy a few high-precision five-axis linkage CNC machining centers, but this is not easy!"

In the past, it was really not easy. To exaggerate, it can be said to be as difficult as heaven, but now, it is not too difficult.

Shanhe Machine Tool Equipment Co., Ltd. has held a product conference, will launch the world's best five-axis linkage CNC machining center, and began to accept orders.

"Mr. Xiao, look at what I sent from your phone."

Mr. Xiao saw his mobile phone ringing, and took it out to see that it was one of his technical directors. This factory also received the invitation letter, but they only sent this technical director to participate.

Seeing that the technical chief's tone was so hasty, he seemed to be a little excited, Chief Engineer Xiao immediately opened the information received in the mobile phone, and then looked through it.

what!
This is impossible!
Lin Yunwen noticed the change in Mr. Xiao's expression, and asked with concern: "Old Xiao, what's the matter, is something wrong?"

Chief Engineer Xiao became visibly excited, and said loudly: "Old Lin, all problems have been solved. Shanhe Machine Tool Equipment Co., Ltd. has launched the world's best and top five-axis linkage CNC machining center!"

There is such a thing!
Lin Yunwen immediately remembered that he also received an invitation letter a few days ago, but he was too busy with work and didn't go. Nowhere did he think that what they launched was the best and most outstanding machining center in the world.

Lin Yunwen almost snatched Mr. Xiao's mobile phone, and immediately looked at the information on the mobile phone. While flipping through it, he said excitedly: "It's unbelievable, it's great!"

With such a good CNC machine tool, He Chou couldn't process high-quality parts. Lin Yunwen's mass production of this aero-engine no longer has any problems. No wonder he is so happy and even a little excited.

……

Day two of the product launch.

Wang Xudong went to Xudong Mining Group again, appearing in Xudong Mining Group for two consecutive days, which is relatively rare.

Went to his office again today, Wang Xudong was preparing to wait for He Yehui's arrival, yesterday's product launch was so successful, Wang Xudong guessed in his heart that he must have won a lot of orders.

Wang Xudong made a cup of tea by himself, using the best tea leaves, which meant celebration. He Yehui's coming will bring good news, that's for sure.

Take a sip gently, it seems that the taste of this tea is much better than usual, this is because of your mood, when you are in a good mood, it tastes different.

After drinking a few sips of tea, Wang Xudong was thinking in his heart that Shanhe Machine Tool Equipment Co., Ltd. was an instant hit, from obscurity to fame.

Wang Xudong has already seen a lot of news about this product launch conference on the Internet, and this five-axis linkage CNC machine tool is so advanced that it will not work if it is not popular.

There was a knock on the door of the office. Wang Xudong thought it was He Yehui who had arrived, so he went to open the door with great interest, but he didn't think that the person outside the door was not He Yehui at all.

....
The second one is delivered!

That's all for today's update, thank you all!

(End of this chapter)