Hyperdimensional Warlock

Chapter 3632 Improvement

In the next half hour, Angel witnessed the entire forging process in Moretta's workshop.

I have to say that this is the most assembly-line-like forging that Angel has ever seen.

Material selection, material setting, defect removal, heating, purification, secondary heating, hot melting, shaping, painting, condensation, packaging... each step is completed in different compartments.

Each compartment has a corresponding person in charge, a digital assistant, and a large number of crystal puppets used to carry and handle debris.

These compartments are closed to each other, and the only thing connecting them are several suspended water channels.

The water channel is filled with special coolant.

After each step is completed, the crystal puppet will put the semi-finished product into the ditch and let it float down the water to the next compartment.

Finally, step by step, we reached the end point - the condensation pool.

The molded embryo will enter a condensation pool that is mixed with several types of coolant and filled with brilliant colors and intense light.

The embryo sinks to the bottom of the condensation tank for half an hour.

Finally, a vortex will appear at the bottom of the pool, rolling the condensed device embryo into the packaging chamber below, and then pulling it from the hanging shaft to the first floor of the bubble workshop, allowing the crystal puppet to be transported to the nearby bubble warehouse.

The whole process can be said to be very smooth.

Moreover, because someone is watching every step, it is almost impossible to find obvious defects.

This is probably why the embryos forged by Moretta are extremely stable.

……

When Moretta took Angel and others to the last area of ​​the workshop, next to the condensation pool.

After much hesitation, he asked: "What do you think of my workshop, sir?"

Throughout the entire process, Moretta did not ask Angel for his opinion on the workshop.

It's not that he didn't ask, he originally thought that Angel might ask. But from beginning to end, Angel remained silent, which made him feel a little uneasy.

The more uneasy you are, the more you will think of bad things.

Napoli said before that Angel just randomly picked a workshop to see the progress...but was it really random?

Angel also made it clear before that he came from Bubble Warehouse. Could it be that Angel saw the embryonic weapon he refined in the Bubble Warehouse and felt there was something wrong with it, so he chose his own workshop?

In short, Moretta began to feel uneasy at this time.

After arriving at the condensation pool, Moretta finally couldn't help asking Angel a question.

On the other side, the reason why Angel remained silent was actually because he was thinking about the entire forging process and how to improve it.

Because I didn’t have an idea yet, I didn’t say anything.

Now that he heard Moretta's inquiry, Angel originally planned to say a few perfunctory words, but through super-perception, Angel noticed Moretta's inner uneasiness.

Angel thought for a while and decided to explain a few words.

"There were almost no major problems in the whole process, it was perfect." Angel: "It can be said that this is the most streamlined forging I have ever seen."

"Assembly line?" Moretta was stunned for a moment.

Angel: "You can understand it as division of labor and combined efforts."

"Generally speaking, there is nothing wrong with your refining. At least in my opinion, it is very good."

As Angel spoke, he stretched out his magic hand, grabbed it from the void, and grabbed a water ball from under the condensation pool.

Inside the water polo is an embryo that is settling.

Angel carefully looked at the basically formed embryo and said calmly: "It's a very good embryo."

After speaking, Angel threw the embryo into the condensation pool, and then continued to grab new embryos.

In just half a minute, Angel captured more than ten embryos.

Angel looked at each embryo for a few seconds before throwing it back into the condensation pool.

Finally, Angel gave a comprehensive evaluation: "They are all qualified products and can be used as consumables for the login device."

After hearing Angel's evaluation, Moretta's hanging heart finally dropped. However, he still had some doubts in his heart. Since there were no major problems in the entire forging process, why didn't Angel say a word before?

and……

Angel's brows have been frowning slightly. Why is this?

Moretta is also an outspoken person. Now that he has said this, he simply asks the doubts in his heart.

Angel was silent for a moment and replied: "Although the whole process is perfect, because it is too perfect, I can't find any room for improvement at the moment."

"Improvement?" Moretta was stunned. Did Angel come to his workshop to improve the device embryo? So, is there really something wrong with his embryo?

Angel shook his head: "There are indeed some small problems, but they are not big."

"Can you tell me what the problem is?"

Angel didn't hide it and told Moretta about the low number of logins.

After finishing speaking, Angel added: "Although the number of logins for the weapon embryos coming out of your workshop is low, its stability is very high, almost second only to the weapon of the mirror-wielding banshee. Embryos. And not only in this current area, but also in the entire production area, your stability can be ranked among the best."

Moretta: "Is that why you came here to see my workshop?"

Angel nodded: "The stability is very high, which means your forging level is very stable. I just want to come over and see if I can make some improvements to increase the number of logins while maintaining stability."

"But...it seems a bit difficult at the moment."

Moretta now understood why Angel had been silent before, probably because he was thinking about how to improve.

"Is there no way to improve it?" Moretta is not a stubborn person. As a fashion designer, he will accept various opinions to maintain his fashionable mind. Therefore, when Angel said that his embryo had some minor problems, he did not feel offended, but was eager to improve it.

Angel did not answer 'yes or no', but pondered: "I originally thought that the embryos produced in your workshop were all forged by one person."

"In this case, I can give some improvement plans from a forging perspective."

"But what I didn't expect was..."

Moretta's forging workshop is a relatively mature assembly line.

The assembly line is of course good and worthy of promotion, but because the level of each compartment is almost the same, Angel cannot find any major faults, resulting in a lack of improvement plans.

“If you want to achieve a leap-forward qualitative change, the entire assembly line must change.”

In other words, the person in charge and assistants of each cubicle now need to be completely replaced.

This is unlikely.

Because the newly recruited people must reach the top level, and their levels must be similar. In the end, the number of these people will be several hundred.

This is obviously impossible to do. Napoli's ability to assemble the current assembly line team is already the limit of what he can do.

"So, there is no way to make a qualitative change in a leap-forward way." Angel: "The improvement plan I can give is to make changes in some details at most."

"For example, the heat control on the hot melt, the techniques during shaping, the coolant combination in the condensation pool...etc."

"But these improvements may not lead to a significant increase in the number of logins."

According to Angel's estimate, it might have gone from a stable 750 times to 760 or 770?

The increase will not exceed 50, and it will not enter the high-quality or good-quality area. It is a small improvement.

"What I can offer right now is this small improvement." When Angel said this, he sighed softly: "But I feel that this small improvement is not that big..."

Before Angel could say "it's not necessary", Moretta said first: "It's necessary!"

"Although it's just a small improvement, every small improvement can make my work better, right?"

Moretta: "I used to do the same thing in fashion design. My style tended to simplify from the complex to the extreme, but after simplifying to the extreme, it is basically difficult to improve..."

"I will visit different designers, even designers from different ethnic groups, and ask them to give me advice on my design. Even if this advice does not greatly improve my work, as long as there is improvement, I will eventually To reach the heights I strive for.”

In the same way, Moretta does not feel that small improvements are unnecessary. As long as it is an improvement, even if it just increases the average from 750 times to 751 times, he is willing to do it.

The important thing is not the number of increments, but finding the problem.

He couldn't find the problem himself, so he never thought about improving it; but if others could help him find the problem, he would be extremely willing to make adaptive changes.

What's more, from 750 evolutions to 760 and 770, in Moretta's view, this is not a small change.

If you go one step further, you will reach the realm of good products!

Seeing Moretta's eager eyes, Angel's hesitant expression suddenly became relieved.

Since Moretta wants to make improvements step by step, let's do it.

Perhaps, he can really achieve stable improvement in the future and reach the level of good or excellent products.

……

In the following time, Angel began to improve his teaching.

The most important teaching areas are the hot melt area, shaping area and condensation pool.

These three places are the most important areas on the entire assembly line, and they are all headed by Moretta.

Angel has no way to improve everyone's level, so he can only start with Moretta...

Time passed slowly, Angel taught in detail, and Moretta also studied very seriously.

About an hour later, Angel taught Moretta all the details that needed improvement, including changes in shaping techniques and the coolant ratio in the condensation pool.

Moretta also absorbed it quickly and even planned to improve it immediately.

However, fire control and shaping techniques cannot be changed immediately, so he can only start by mixing coolant.

The new coolant ratio given by Angel does not require emptying the original condensation pool, only adding new coolant to it.

Moretta found a crystal puppet and within ten minutes, he remixed the coolant ratio in the condensation pool.

Then, Moretta found Angel with two embryos.

One of the embryos was soaked in the original condensation tank; the other embryo was soaked in the new condensation tank.

Moretta asked Angel to help test the impact of old and new condensation pools on the number of logins.

Angel himself also had this intention, so he agreed without hesitation, but...

"One control group is still too little. Let's get a few more embryos."

Five minutes later, with several control groups as reference, Angel recorded the number of logins for the old and new condensation pools.

It was finally determined that the average number of logins to the new condensation pool increased by about 4 to 5 times compared to the old condensation pool.

That is the difference between 750 and 755.

The number of increases was not large, but at least it was an increase that could be seen with the naked eye. This made Moretta very happy and couldn't wait to learn the fire control and shaping techniques taught by Angel.

Seeing Moretta's enthusiasm for learning, Angel was quite pleased, so he made a request... to leave.

Because if they don't leave, Moretta will definitely stay with them, wasting time and enthusiasm for studying.

So, it's a good time to leave now.

Moreover, it has been more than two hours now, and there is still no news from Naples. Angel is also curious whether there is any big problem in the workshop of the Mirror-wielding Banshee, and wants to go and have a look.

Seeing that Angel insisted on leaving, Moretta did not try to stay. He just begged Angel to tell him if he found out more problems in the future.

Angel naturally agreed, and under the guidance of Moretta, they returned to the surface.

After saying goodbye to Moretta, Angel and Laplace looked at each other and walked out of the bubble workshop.

When they returned to the outside world, they found that the space around them seemed to be significantly wider... Was it because there were fewer bubbles?

Angel observed it carefully and finally determined.

The density of the bubbles has not changed, what has changed is... the crystal puppet.

When they came to this area before, there were a large number of crystal puppets flying in the airway. Whether they were carrying supplies to major bubble workshops, or transporting embryos from bubble workshops to warehouses, these were the activities of crystal puppets. .

As a result, crystal golems populate the sky.

But at this time, no crystal puppet left the bubble workshop... This was obviously a problem.

Moreover, Angel noticed that there were no crystal puppets in their bubble area. In other areas, the crystal puppets were not abnormal.

It can be seen that the crystal puppets in their area are controlled by others.

There are currently only two people who can control the crystal puppets in an area: either Napoli or Elder Kongta, the person in charge of the crystal puppet data in this area.

Just when Angel was guessing who controlled the crystal puppet, Laplace suddenly said: "I seem to know where the crystal puppet has gone..."

Angel looked at Laplace in confusion.

However, he found that Laplace was looking in the direction behind him, and Angel immediately followed her gaze and turned around.

In the first few seconds, Angel didn't see anything unusual. But after observing carefully for a few seconds, he finally noticed something was wrong. He saw a huge black circle...

(End of this chapter)