Hyperdimensional Warlock

Chapter 167 Hot Melt Method

The Pamiji Plateau is located in the southwest of Yongye Kingdom, a bilateral area that communicates with the Guman Kingdom.Because the average altitude is above 3500 meters, there are few people coming and going.Except for some indigenous primitive tribes, the Pamiji Plateau is an undisputed human forbidden zone.

But on this day, in the blue sky that had been bleached, a huge black shadow shining with crystal brilliance passed by.

It was a strange thing, whether it was alive or dead.Its overall structure is a flat and huge transparent crystal.There are white silk threads inside the crystal, which looks like ice... No, it should be said to be ice.

Because when a plateau eagle flew over a hundred meters away, it froze into an ice sculpture and fell down.

If it is ice, it must be dead.But why is it misunderstood as a living thing?The reason is that this huge piece of ice about 20 meters long has the same transparent wide wings on both sides, and the shape of the wings is similar to that of a swan.Every time it flaps its wings, crystal-clear ice feathers flutter down.

The intense sunlight on the plateau shines brightly on this piece of ice with wings.

On the ice, several mysterious people in white robes were resting with their eyes closed.The endless freezing power of the ice didn't seem to be able to harm them. Instead, their figures became more and more ethereal in the white air.

If you observe carefully, you will find a frozen crescent moon embroidered on the backs of the men in white robes.

……

On the first day of the second half of the month of flowers, Angel experienced half a month of sluggishness. On this day, the consequences of the backlash of the spell were finally lifted.

He threw himself into practicing the spell almost immediately.

He was the first to learn the basic techniques of epigraphy, heat melting and condensation.In his plan, there are two prerequisites for him to climb to the top of the Sky Tower, one is alchemy weapons; the other is a set of defensive spells.

Among these two prerequisites, learning taoshu should not be a problem, it just takes a while to practice it proficiently.However, Angel was a little uncertain about the production of alchemy weapons. After all, it was the product of the combination of two civilizations, and its future was uncertain.

Most importantly, Angel didn't know at all whether he could cross the threshold of the alchemy world.If you can't even become an alchemy apprentice, then all other plans are empty dreams.

Therefore, Angel immediately put all his attention on the hot melting method.

The heat fusion method is the first threshold for alchemy apprentices.

The essence of the heat fusion method is actually the long-term combination between the fire element and the magic power, which generates extremely high heat.Then use the trick model to control the range of high heat and prevent it from hurting yourself.

This kind of trick is just the opposite of the trick of the three major frameworks. The trick model is not to build the hot melt method, but to limit the high temperature of the hot melt method.

Angel took out a piece of paper, which was densely written, full of data and formulas.This is the result of the model he deduced for the heat fusion method when he was backlashing the spell a few days ago.

After memorizing several key coordinate points of the model diagram, Angel closed his eyes and entered a state of meditation.

The thinking space has returned to clarity, and the "lollipop" he built is alone in the chaos, and the singularity is slowly turning, purifying the original magic power.

Angel didn't care about the singularity, but released pure magic power from the magic source, and built a trick model of the thermal fusion method.

With the positioning of the Vientiane axis, the trick model was constructed in almost two to three seconds.

After the hot melt trick model was built, there was no abnormality, it just hung in the thinking space, without collapse or disintegration, and there was no urge to release it externally.

Angel turned the trick model to his fingertips, but he still didn't feel anything, nor did he have any traces of extraordinaryness.

"This model is indeed very different. Even if it is suspended outside the body for a long time, it will not collapse. It is as solid as a rock." Angel secretly thought.

Since the model could not see the problem, Angel simply started to "warm up".

The combination of fire element and magic power, simply explained, is to release the magic power out of the body and rub against the outside fire element.

This step seems not difficult, and the output of magic power outside the body is also minimal, but the patience and control he needs are difficult for ordinary wizard apprentices to do.

The so-called patience is to continuously output magic power and warm up slowly.The time required for this process is determined according to the fire element content in the air.In places where the fire element is active, the warm-up time is about a few minutes, but where the fire element is lazy, the warm-up may even take several hours, maybe more.

Basically, patience is a step that can't be difficult for wizard apprentices.

But the control of the next step is the most difficult point of learning the heat fusion method, and it is also one of the reasons why alchemy rejects most wizard apprentices.

During the warm-up process, the magic power must be exported from the body to the outside. Although the magic power is consumed very little, it must be continuously released with the same amount of magic power.

A little more, a little less, even a little bit, will cause the warm-up to fail.

A precise measure of control, which is almost impossible for a wizard's apprentice to do.

……

Angel also started the warm-up step. The magic power was continuously output from the body to the outside. When he first came into contact with the fire element, resistance was very easy.

But after 2 seconds, the preheating fails.The reason is the same as other wizard apprentices, the measurement of magic power is not controlled accurately.

In the second test, Angel carefully released the magic power little by little. With his high concentration, he lasted for... 3 seconds this time.

Angel carried out the third, fourth... tenth test, and the highest record was to maintain the magic power for 4 seconds.Others basically hover for 2 seconds.

In places where the fire element is active, this preheating takes more than 2 minutes.But now he can't even break through for 5 seconds.

Angel was suddenly a little frustrated, didn't he have the talent to learn alchemy?
The magic power was almost exhausted at this time, and Angel was in a bad mood, so he simply closed his eyes and recovered his magic power through meditation.

In the blink of an eye, five hours passed.

During the meditation, Angel's mood gradually calmed down.

He also wanted to understand that it was normal to be hit, and nothing could be done overnight.He will continue to try, if there is really no way to restrain the measurement of magic power, then it can only be said that he has no luck with alchemy.

At this time, the magic power in the magic source was sufficient again. Angel took out the dry food and thought about how to control the amount of magic power while filling his stomach.

Controlling the measurement is definitely not something that can be done with care. Angel almost focused all his attention on the control before, and it was difficult to achieve perfect control.

Angel thought: Manpower is always exhausted, can we use external force?

Speaking of external forces, how to control the measurement, the easiest way is through the pipeline limit.Just like drinking water with a straw, the straw can effectively limit the flow of water.

But it is impossible for him to insert a tube into the thinking space.Besides, can magic be contained in a tube?

Pipeline... Quota...

Angel chanted it over and over again, and various images flickered in his mind.Suddenly, a picture full of dotted lines flashed through my mind.

"I figured it out! I can't insert a pipe, but I can make one myself!" Angor's face flashed with excitement: "It can be done with the Vientiane axis!"

The Vientiane axis is the performance of the 36-bit spatial coordinate system positioning method.

Vientiane axis transforms thinking into a collection of countless dotted lines, and each point can be converted into a spatial coordinate point through Vientiane axis.Angel only needs to build a three-dimensional channel in the thinking space, using the Vientiane axis as the measurement standard, and the measurement of the magic power output can't be controlled!
Thinking of this, Angel immediately started experimenting excitedly.

It took half a day for a channel determined by the Vientiane axis to connect outwards from the magic source.

Angel took a deep breath and began to draw the magic power from the magic source. He was careful not to let the magic power flow out of the channel of the Vientiane axis.

2 seconds, 3 seconds, ... 19 seconds, 20 seconds.

After 20 seconds, the preheating failed again.

However, Angel did not show a frustrated expression this time, because he was very sure that he had solved the measurement problem!From 4 seconds to 20 seconds is the proof!
The reason why he failed this time was not that the measurement was not well controlled, but that the speed fluctuated.

As long as the problem of measurement is solved, other problems are minor problems.

It took a while, and the speed issue could reach a basic balance under his constant attention.

After both the measurement and the speed were resolved, Angel turned on the warm-up again.

2秒，3秒，……19秒，20秒……1分10秒……1分30秒……

At 2 minutes, Angel failed again.

But the failure this time had nothing to do with technology, but... His fingers were burned.

He has been focusing on solving the preheating problem, but he forgot one thing, the preheating position must be within the trick model, otherwise, it will only be a matter of time before he gets burned.

……

The third day of the end of the month of flowers.

Angel moved the stove in the kitchen to the basement.

Light the fire.

A scalding heat wave slowly spread in the basement.

Angor sat by the stove, closed his eyes and began to meditate. After about half an hour, Angor stretched out the tentacles of mental power to feel the activity of the fire element in the air.

——With the stove as the center, the fire element is several times more active than before.

Angor felt that it was almost done. He stood up and went to the pile of wooden boxes on the other side of the basement. These wooden boxes were filled with non-advanced materials purchased from the Prome Alchemy Shop.

Angel took out a black and reddish metal block from the wooden box.

This is Old Demon Blood Copper, which is the most purchased material.It is the lowest level of the blood copper series, a copper mine that has been contaminated with the blood of the old devil and has been cultivated for many years.

The hardness and wear resistance of items made of Earth Demon Blood Copper will be greatly improved, and there is a very small chance of obtaining special effects.

Angel took out the Earth Demon Blood Copper and returned to the stove.

Angel used the heat fusion method to build a trick model, and then output magic power to slowly combine with the fire element, and time passed bit by bit.

After 15 minutes, the hot melt method takes shape!
Angel could feel the intense heat in the model at his fingertips.However, being restrained by the model, there is no sign of leakage.

Angel put the Earth Demon Blood Copper into the heat melting method.

As time passed, the Old Demon Blood Copper slowly showed signs of melting in the heat melting method...

(End of this chapter)