Reborn 80s

Chapter 347

Beijing Meta Science and Technology Industrial Park, which is a science and technology industrial park invested and built by Meta, is located on the edge of the most concentrated area of ​​universities in Beijing.

The entire industrial park is quite large in terms of area, and Mota Microelectronics Equipment Manufacturing Co., Ltd. is located in this industrial park.

In addition, there is also the Beijing Branch of the Mota Institute of Technology in this industrial park.

The entire industrial park is not blocked by walls or the like, but is open.

In the industrial park, there are many buildings under construction.

At this time, Chen Huaiqing came to Mota Microelectronics Equipment Manufacturing Co., Ltd.

In the whole world, Mota Microelectronics belongs to the kind of company that is not too eye-catching, but this company has gathered Huaguo's most cutting-edge talents in the field of lithography machines.

At this time, in terms of the number of R&D personnel in China, it is definitely not as good as 30 years later, but in terms of quality, it is definitely to be surpassed.

Maybe it's because the sense of belief is much stronger!
Mota Microelectronics Co., Ltd. is a joint-stock enterprise, and the largest shareholder is Mota Group.

Chen Huaiqing doesn't know much about lithography machines, and there are more lithography machine companies on the market than Chen Huaiqing imagined.

In Chen Huaiqing's impression, the global lithography machine companies seem to be ASML and the two companies of Neon Country, and the other is Huaguo.

But now, there are quite a few companies around the world that can manufacture lithography machines.

Since everyone can do it, it shows one thing, the lithography machine is not an unattainable product at this time.

Mota Group has invested one billion yuan in Mota Microelectronics to develop lithography machines.

Chen Huaiqing's generous investment has really made many people mutter, what kind of lithography machine is this, is it really that important?
If you invest so much money in the research and development of lithography machines, it is better to go abroad to buy them directly. With so much money, you can buy hundreds of them and come back, which is enough for everything.

At this time, Huaguo's external environment is not bad. Although it is restricted to buy high-tech equipment, it doesn't seem to be that big.

Basically, what Huaguo wants to buy, it seems to be able to buy.

reason?

One, the Soviet Union is still there, and it needs to win over China.

Two, Huaguo itself does not need the most advanced equipment. Even if the technology is imported, it is the technology that was developed abroad many years ago.

Why not bring in state-of-the-art technology?
An advanced technology is expensive, and in addition, the most advanced things are in your hands, and you can't understand it. It would be better to say that you need the technology of more than ten years ago, so that Huaguo itself can digest it.

If you don't have a good appetite, don't eat indiscriminately.

Can only digest porridge, insist on eating dry rice, isn't this a problem?

Anyone who introduces relatively less advanced technology will sell it!
It's such a good thing to sell backward technology to make money, and fools don't sell it.

Even if it is already a backward technology in foreign countries, it is still an advanced technology in China.

Since you can buy "advanced technology" from abroad, why should you develop it yourself?

Now investing money in research and development is useless. No matter how much money you invest, you will not be able to catch up with others. It is better to honestly spend money to buy technology.

Listen, there seems to be nothing wrong with it.

According to normal principles, it is really difficult to catch up with others after two or 30 years.

People at this time felt that Huaguo was completely behind in the field of science and technology.

Many people immediately lost hope of catching up.

Adhering to the principle of joining if you can't beat it, many people went abroad and never came back.

Although in many fields, Huaguo at this time does have a lot of gaps in technology compared with the world's most advanced.

However, in some fields, the technology is also very good, reaching the world advanced level.

For example, in terms of lithography machine technology, there is a gap with the world's most advanced level at this time, but it has not formed a natural barrier.

After the establishment of Mota Microelectronics, the research and development of lithography machines is in a process of accelerated development.

After all, Mota Microelectronics is investing in research and development funds, which is basically an investment regardless of cost.

There is also the treatment of R&D personnel, which has been raised several levels. Although the salary level is still several times lower than that of the United States, there are other benefits.

Medical care, pensions, education, and housing are all taken care of.

"This lithography machine was developed in accordance with the requirements of Mota Semiconductor, and it will be officially delivered in the second half of this year."

For R&D personnel, when they were engaged in R&D before, sometimes they didn't know what to develop.

Just focus on a certain foreign product for research and development, and if the same equivalent product is produced, it will be considered a success.

As for how to use something after it is produced, it seems that everyone has not considered it.

Now Mota Microelectronics is engaged in research and development with a strong purpose, focusing on market needs for research and development.

Mota Microelectronics develops whatever customers need.

Even take the initiative to upgrade according to customer needs.

After the product is sold for money, the R&D personnel can also get dividends.Stimulated by money, everyone is full of energy at this time.

Because in Mota Microelectronics, besides salary, there are also bonuses.

There are two types of bonuses: project bonuses and technical bonuses.

The project bonus is to share proportionally after the project ends and is sold on the market.

The technology bonus means that as long as a new technology is developed, you can get a bonus.

Of course, if the technology works well in commercialization, there will be technology shares afterwards.

Everyone is racking their brains to develop new technologies.

Chen Huaiqing flicked through the technical information in his hand. This is a back-end lithography machine, which is specially made for chips.

The current chips are naturally not as good as 30 years later, and the chips on civilian products have entered the era of 5-nanometer process technology on a large scale.

Even for some expensive electronic products, the chips have already adopted 3nm chips.

The chip process technology is advancing to 1 nanometer.

Constantly approaching the physical limits of silicon chips.

Of course, with the advancement of technology, the physical limit is constantly being refreshed.

"Is the entire lithography machine fully localized?"

"60.00% of the components are domestically produced."

Chen Huaiqing frowned, this was not enough.

According to his expectations, it must be 100% now.

As an enterprise, if it only pursues profits, then the procurement of parts and components can naturally be casual.

However, Mota Microelectronics has not been a purely profit-seeking enterprise since its establishment.

In other words, Chen Huaiqing didn't think about making money at all.

How big is the semiconductor market?

Let’s not talk about the global market, let’s talk about the domestic market, which needs to import more than one trillion chips every year, which exceeds the cost of crude oil imports.

Imported chips exceed one trillion yuan, and the domestic market itself is very long.

Calculate how big the local market is.

What is the money invested now?

As long as you succeed in seizing the commanding heights in technology, a steady stream of money will flow into your pockets in the future.

Mota Microelectronics is indeed market-oriented for research and development, but this is just a strategy for its development and growth.

Today, Mota Microelectronics snatched an order from the market, and the opponent would earn less money for a lithography machine, which would weaken the opponent in disguise.

Chen Huaiqing: "The domestic production rate is too low, at least it has to be raised to over 90.00%."

Faced with Chen Huaiqing's request, the general manager of Mota Microelectronics was also a little difficult to handle: "If domestic components are used, it may take more than two years to meet the technical requirements of Mota Semiconductor."

"In addition, in terms of cost, some domestic parts are much more expensive than foreign ones."

It is the nature of market-oriented enterprises to try their best to cut costs.

If the market is really completely free, there is no problem, but the market is always controlled.

There is no eternal rule for business operation. If you want to last long, you must consider various risks and make early preparations for some possible major risks.

Chen Huaiqing knows the future too well, better than anyone in this world.

Therefore, Chen Huaiqing attaches great importance to the localization rate.

Chen Huaiqing: "As long as domestic products can meet our technical requirements, even if they are a little more expensive, we must use domestic products. If we don't purchase, how can domestic technology improve? If domestic technology does not improve, will we have to go to Purchase abroad."

"The most important thing is, when the time comes, what if they don't sell it to us?"

"Why we develop lithography machines is because foreign companies don't sell us the most advanced lithography machines. Without advanced lithography machines, Mota Semiconductor cannot make the best chips."

"What technology is lacking, we will develop it. Our goal is very clear, in the next 30 years, the processing capacity of the lithography machine will be increased to 10 nanometers."

10 nanometers!

When everyone heard Chen Huaiqing's words, they all looked at each other in blank dismay, and then did not speak.

How to say this!

Say it can be done?
Some are suspected of flattering.

After all, how did Chen Huaiqing get 30 nanometers 10 years later?

Moreover, according to the current technological development, it does not need 30 years, but only 20 years at most.

Everyone is quite optimistic about the prospects for technological development.

Therefore, Chen Huaiqing's request does not seem to be high.

The development of science and technology is not achieved overnight. A technology may be stuck in one place for a long time before it can be broken through.

So I dare not say that 30 years is too long.

Chen Huaiqing looked at Xu Ruiyi: "What does the chief think about this?"

Chen Huaiqing came here on a rare occasion, so naturally everyone came to accompany him.

In the entire Mota Microelectronics, only Chen Huaiqing has this treatment.

Usually, leaders from the city and even the ministry come to inspect, and Mota Microelectronics just arranges special reception staff to receive them.

As for scientific research and technical personnel?
There is no reception.

Their job is to develop technology, not to engage in reception.

Xu Ruiyi started to engage in research and development of lithography machines in the 60s. In 1980, he developed the first automatic alignment step-by-step projection lithography machine in China.

After the establishment of Mota Microelectronics, all domestic lithography machine R&D technicians have been assigned to Mota Microelectronics.

It can be said that Mota Microelectronics belongs to the strong army.

(End of this chapter)