Tech empires start with knockoff systems

Chapter 268 Entering the field of material research and development
After all, Lin Xuan has already mentioned his dream before, and also said that the next goal of Hantang Technology is to develop a general-purpose processor.

So the academicians at this time also closed their mouths helplessly, and could only shake their heads helplessly.

At this time, Dean Li of Xia Ke Academy slowly came to Lin Xuan's side with some majestic old people.

In this regard, Lin Xuan knew that those were big bosses, so he smiled and shook hands with them one by one.

Many bigwigs also appeared at the celebration this time.

For example, when developing the 45nm manufacturing process, the old man who solved the problem of how to manufacture high-tech equipment for Lin Xuan also appeared on the stage.

At this time, Lin Xuan was shaking hands with the old man very excitedly, and his words were naturally infinitely grateful.

Of course, while being grateful, Lin Xuan also insinuated and asked if he could continue to borrow those state-owned or digital factories.

The strength of those level 8 or level 9 workers continued to manufacture high-tech equipment for him.

The reason for such insinuating inquiries is because Hantang Technology has developed many equipments for the 45nm manufacturing process.

Hantang Technology has no reason to ask those digital factories or state-owned factories to continue to manufacture high-precision equipment for Hantang Technology.

Secretary He also returned to the old man after completing the capture of the 45nm manufacturing process and continued to be the old man's secretary.

So to a certain extent, Hantang Technology has lost the ability to manufacture high-precision equipment such as lithography machines after conquering the 45-nanometer manufacturing process.

In other words, even if Lin Xuan developed a new type of lithography machine, it would be nothing more than a castle in the air because of lack of manufacturing capabilities.

So Lin Xuan needed to ask the old man on the sidelines if he could continue to borrow the eighth-level and ninth-level workers from the state-run or digital factories to manufacture equipment for him.

But the final result is naturally very disappointing, because the development of a 45nm manufacturing process is the primary problem that Daxia urgently needs to solve.

Therefore, the higher authorities can openly require digital factories or state-owned factories to manufacture ultra-precision parts for Lin Xuan.

But now that the 45nm process technology has been completed, there is no justifiable reason for the higher authorities to require digital factories or state-owned factories to process ultra-precision parts for Lin Xuan.

If this is really done, the following digital factories or state-owned factories may ask questions, wondering why they should do this?
They are dignified digital factories or state-owned factories put down a bunch of tasks in their hands and do not do it, and give priority to manufacturing for a private company. They are a little bit dissatisfied when they say it.

But despite the disappointing results, the old man still gave the words.

If the things designed by Lin Xuan pass the review, it is determined to make up for Daxia's vacancy in this field.

The old man can break the rules and speak for him, asking those state-owned factories or digital factories to make ultra-precision parts for him, and then assemble them into machines for him.

With this result, Lin Xuan felt mixed.

That is, he didn't get what he wanted, but he managed to get a piece of good news amidst all the disappointments.

But at the same time, Lin Xuan also discovered that Hantang Technology has a major flaw, and this flaw is the problem of low manufacturing capacity of high-tech equipment.

However, although the problem was found, it was not as easy as imagined to solve the problem.

After you design the high-precision equipment, you can complete the most advanced equipment design.

In terms of design, Daxia is actually not weak. What Daxia lacks the most is the ability to turn the designed things into entities.

And to solve how to turn the designed things into physical things, there is one thing that must never be opened, and this thing is the material!

Material sounds like an ordinary term, and it looks inconspicuous.

But who knows that just a material is actually the fundamental basis for determining whether a country is strong or not.

In terms of ordinary products and equipment, Daxia can say that ordinary products are nothing more than various cylinders or special plastics.

But when it comes to designing high-end equipment, the importance of materials will be highlighted, and eventually the research and development of many advanced products will be blocked.

The most obvious one is the turbofan engine or turbojet engine of the aircraft.

Daxia has already had the blueprint of the turbofan engine, and also has his own small improved design.

However, limited by material issues, turbofan and turbojet engines have been unable to reach the international advanced level and have been unable to land.

Manufacture can definitely be forcibly manufactured. Daxia has many eighth-level and ninth-level workers, and it can completely build an engine like a lithography machine!

But if the material is not good enough, it is really fatal.

Because the material is not good, after the successful manufacture, it can only run for tens to hundreds of hours, and then it needs to be replaced with a new engine. Who can bear it?

That’s not the way to burn a lot of money, what can you do if you can only run for dozens of hours or even hundreds of hours at most? !

Let’s not talk about the waste of financial resources and the waste of manpower of high-end workers.

There will definitely be great hidden dangers in the act of forcibly using it on an airplane just because there is insufficient material!
The plane at an altitude of thousands of meters or even tens of thousands of meters may collapse at any time because the material cannot support it, and then there will be a crash that shocked the world!

Therefore, because of the problem of poor materials, it deeply troubled Daxia's aero-engine development.

In this situation, it was not until ten years later that Daxia had money to increase research in the field of basic materials due to economic development.

With good materials and the field of CNC machine tools, it has also achieved rapid development.

Finally solved the aero engine problem, so that the fifth-generation Daxia fighter jets have come to the forefront of the world!

So at this time, Lin Xuan discovered that although Hantang Technology has created a series of miracles, Hantang Technology is actually a weak enterprise.

An enterprise that cannot even manufacture high-tech equipment!

So at this time, Lin Xuan wondered whether he could first seek some 8th-level workers to come and serve him, and then solve the problem of high-precision CNC machine tools.

But it is not easy to do this. Level 8 workers are strategic workers.

Whether it is a state-owned factory or a digital factory, they will not release their treasures.

Even if Lin Xuan can get it, it is estimated that he will have to pay a lot of money to get some 8th-level workers, and this matter must be approved by Da Xia.

In addition, apart from the vacancy in manufacturing, Lin Xuan also discovered another deficiency of Hantang Technology through this incident.

The achievements of Hantang Technology in the field of basic materials can be said to be zero, no achievements!
Without materials, many things cannot be manufactured, and many black technologies are castles in the air, even if they are designed, they cannot be manufactured!

Therefore, Lin Xuan is ready to enter the field of basic materials, specializing in the research and development of various high-performance metal materials or ceramic materials for special purposes.

Thinking about it carefully, Lin Xuan found that there are so many material research projects to invest in!

But these materials are materials that Lin Xuan can't avoid, and Lin Xuan can't do without research and development.

After all, according to the original history, if Lin Xuan wants to use such materials, it will take Daxia to increase investment in the field of basic materials after [-] to gradually usher in the era of fruitful results.

But there is still a long time before [-]. During this time, Lin Xuan can't just do nothing and wait for others to develop suitable materials.

Therefore, if Hantang Technology wants to use various advanced materials, it can only be developed by Hantang Technology itself, and it cannot wait for the sky to drop its own fruits...

……

When the celebration party was held at the Xia Ke Academy, it was 8 o'clock in the morning at the Mei Di Country.

At 8 o'clock in the morning, it was the time for the workers in Medigo to go to work.

At this time, in the world-renowned Silicon Valley, Intel's president, Paul Olds, came to the company before the prescribed working hours as usual.

But today was a little different from usual, when he just walked into the door of the company, he heard some strange discussions.

"Have you heard? The youngest academician in Daxia was born?"

"What is an academician? Is there a doctor with a high status?"

The reason why some people in Intel say this is because it is in the eyes of foreign people.

In fact, the status of a doctor is actually higher than that of an academician, which is almost completely different from the situation in China.

Of course, there is actually the title of academician in foreign countries, and it is also a symbol of the highest scientific research honor status.

But it may be too difficult to obtain a doctoral title abroad, and the doctoral level is not as full of water as Daxia.

So if the people of Daxia read the comics or movies on the side of Meidiguo.

Then they will find that the villain who can destroy the world is often a doctor, not an academician.

Because in people's impression, a doctor is the title of the strongest scientific research force!

"Has Lin Xuan become an academician? Hmph!"

Hearing the news, Intel's president, Paul Olds, snorted disdainfully.

The ghost knows whether Lin Xuan used the power of money to make him an academician, but judging from the fact that Lin Xuan became an academician and let Intel employees talk about him, Xuan should have paid this time.

After all, he didn't pay to become an academician, and let the media report it loudly, so how could the employees of Intel know about Lin Xuan?
Therefore, Lin Xuan must have paid for it, and for his face, he spent a lot of money to buy newspapers, making his becoming an academician known to the whole world, and thus making his ancestors famous all over the world.

It has to be said that he is worthy of being a competitor. No matter what achievements Lin Xuan has made, Intel's president Paul Olds always speculates on Lin Xuan with the greatest malice.

With a disdainful smile on his lips, Paul Odes walked slowly to his president's office amidst the greetings from the staff.

After receiving the hot coffee from the female secretary, Paul Olds looked down at the newspaper on the table.

As the head of Intel, mastering the latest information in the industry is one of his job contents.

So the first thing he did when he came to the company was to find out what key news appeared yesterday.

Soon, Paul Olds saw the news that Lin Xuan, the head of Hantang Technology, claimed to enter the field of computer chips reported by the Contract Times.

"Ridiculous, extremely ridiculous!"

Seeing that Lin Xuan claimed to enter the field of general-purpose processors, and also to end Intel's hegemony.

The corners of Paul Olds's mouth couldn't help but curled up in a mocking arc.

"Is this guy Lin Xuan brain-dead? Doesn't he know that Intel has almost withdrawn the authorization of X86, and will never authorize the X86 instruction set?"

Speaking of this, Paul Olds had a smug smile in his eyes.

Thanks to Intel's strategy of recycling the X86 instruction set authorization that year.

At present, there are only a few large international companies in the world that still have the authorization of the X86 instruction set.

(End of this chapter)