Open Traveler: Culture Invasion Parallel Blue Star

Chapter 168 How to make supercar parts by hand!
The rich second generation picked up the radio: "Who is behind, who is behind, Master Lin is here, please come and receive me personally."

The radio creaked: "Master Lin is here? Come here immediately!"

"Let Master Lin take a look at the equipment and data of the lap, and we'll come over right away."

The rich second generation picked up the computer: "Master Lin, let me show you. I heard that you didn't take a good look around when you came back last time. Let's take a look at our equipment first."

On the field, there are many cars running wildly now.

The data on the computer is constantly changing and refreshing.

Fu Erdai pointed to the computer: "Master Lin, look, this is the analysis software used in the professional speed race in Tu'ao."

"We set up forty cameras throughout the stage."

"Data analysis can be performed full time."

"Every once in a while, a piece of data will be sent back for processing here."

"This is the latest data analysis system in the world, and you probably haven't seen it yet."

Lin Xuan looked at the data list carefully.

"This system still doesn't work. It's easier to see it with a histogram."

"The things to be analyzed are too complicated. We only need to analyze three things."

"Single-lap speed, long distance, cornering performance, and other data are useless for car modification."

The lap speed is the explosive power of the car itself.

Stability is what matters at long distances.

The cornering performance represents the upper limit of operation.

Except for these three things, other data analysis looks very detailed, but in fact it is useless at all.

The rich second generation scratched his head: "Then these laps, instantaneous speed analysis, and straight line speed analysis are useless?"

"It's useless." Lin Xuan took the computer and looked at it.

After all, this system is the best system used by Blue Star people, and there is still a comparison parameter selection function.

Soon, other data were screened out.

Lin Xuan pointed to the data: "According to the data, Von Carl's model is the most powerful in the long distance. After ten laps, no car on the track can run faster than Von Carl."

"The fastest one lap should be this Hutu."

"The best cornering performance is this Qinglianhua."

"The stability system of this Qinglianhua should have been modified, and it was modified by a master."

The rich second generation nodded: "It seems to be basically like this."

Once the data is clean, it looks easier to analyze.

Lin Xuan marked a few cars: "These cars have basically not been modified. If they have been modified, they have been modified for nothing."

Fu Erdai pointed to the data of one of them: "This is the one you modified, Master Lin."

Lin Xuan nodded: "It can be seen that the cornering performance is the same, the single-lap speed has improved a lot, and the long-distance speed is not bad."

Soon, Liu Cheng brought a large group of people over.

"Where is that Master Lin?"

"Here we come, hey hey, it's really Master Lin!"

Liu Cheng stepped forward: "Oh, Master Lin, you finally remembered us. Didn't you agree that you won't change places? Why did the people over there say you moved away when I went looking for it?"

Lin Xuan smiled: "I thought I wouldn't move away, but now I can't help it."

"I saw the letter, but I was ready to come over today, so I didn't reply."

Liu Cheng: "Master Lin, they all want to modify the car."

Lin Xuan: "Change the car, small change, big change?"

One of the 25-year-old youths: "Does Master Lin have time?"

Lin Xuan: "I'm free in the past few days, and I can take two orders for major changes."

"But you have to hire a group of experienced masters to help."

"There is no need to change a car with a poor foundation, the most expensive one."

Lin Xuan now only wants to make money.

The young man: "Where do I have the latest Qinglianhua S87, is my brother interested?"

"Qinglianhua S87?" Qinglianhua S87 is already a super sports car, and it is more similar to the Lamborghini GT of Dixing.

"It can be connected, but if I change it, I will change all the shape, the engine will not be moved, I will change the transmission system, and I will change all the cornering system and circuits."

"Can you accept it?"

The young man thought about it for a while: "Is this a change? How much can the speed be improved?"

Lin Xuan: "It can't reach its maximum speed at all if it can be lifted to this runway."

"!!!" The people around were shocked.

What must have been changed?

Lin Xuan smiled. Compared with Earth Star, Blue Star's people are not so adventurous.

To be precise, the distinction between excitement, adventure, death, and death is relatively strict.

The upper limit speed of a super sports car is too fast, which is also a kind of quick death behavior.

In this world, there is no F1, only the Tu-Australian speed race similar to F1.

On the Earth and Star side, car races are also popular in Tu'ao.

But their game is more extreme, even more extreme than F1.

There was also a famous scene where the whole car ignited while running, and even the front of the car was raised, and the car shot more than ten meters into the air like a rocket, and then crashed.

Compared with the Earth Star Tuao Speed ​​Race, the Blue Star Tuao Speed ​​Race is just a small fight.

Flat-bottomed take-off, vertical lift-off, and then crash, this kind of thing has never been thought of in the minds of the Blue Stars.

Of course, the Earth Stars didn't think about it, but in order to pursue speed, the Earth Stars changed the car to that.

"Okay, just change it like this. If it's really so fast, this field can't run. I'll transport it to the field in Shanghai to run. If the field in Shanghai doesn't work, I'll transport it to the field in Tu'ao." The young man It seems that I really like Lin Xuan's saying that changing to this venue can't run its upper limit.

Make a decision directly, and just change it like this.

Lin Xuan: "Is there anyone else who wants to change?"

"The cost of major changes will not be low."

"Let me tell you first, at least the modification fee of the original price of the whole car will be used, and I will earn several million from it."

After Lin Xuan said that, the rich second generation looked at each other.

Some people just don't want to change.

But there are still people who are not short of money and are adventurous. A young man with dyed yellow hair: "Change, I bought a new Horford, and I can change it to anything. I just want a unique sports car in the world."

Lin Xuan: "Horford? What model?"

Yellow-haired youth: "Horford C90, 2022 model."

"The latest one?" Lin Xuan: "This model can be modified to be very flamboyant."

The yellow-haired young man scratched his head: "Very coquettish?"

Lin Xuan: "Don't you want a unique sports car in the world? This car will be very eye-catching after it is modified."

"Okay!" The yellow-haired youth said, "Then what do we need to prepare?"

Lin Xuan took out a piece of paper: "These things can be bought in Yanjing, and it's best to buy them all in a short time."

"The first ones will be used soon."

"In addition, I need at least ten skilled workers or modifiers who understand thermoplastics to help."

Liu Cheng: "Great, are you really going to do what you said before?"

"I'll get someone over here right away."

This is a car club, and they can buy these things through channels.

It's not particularly remote here, and it doesn't take long for the delivery to arrive.

Before the things were delivered, the people came first.

Liu Cheng found four modifiers.

The 25-year-old rich second generation invited six skilled workers to do thermoforming.

They are all from the rich second generation's own factory.

Liu Cheng: "Master Lin, everyone is here, please tell us how to do it first?"

Lin Xuan pulled a whiteboard and began to write on it with an ink pen.

"The material we're going to use for the exterior panels is ... carbon fiber."

"Not just the exterior panels, but the interior will all be replaced with carbon fiber."

At Earthstar, carbon fiber was invented by Edison, and 70 years after its invention, it was first used by Ford to make car parts.

The carbon fiber in this world was invented by Elhouse, the great inventor of Blue Star.

"Everyone knows the advantages of carbon fiber, right?"

Liu Cheng: "Light, not easy to corrode, and strong."

"But the plasticity is poor. Once damaged, it cannot be repaired. It can only be replaced with new ones."

"The automotive industry generally has nothing to do with carbon fiber."

"It is used a lot in the bicycle field."

The so-called carbon fiber is a fiber material with a carbon content of more than 90.00%.

It was originally used as a similar cloth.

On Bluestar's side, the use of carbon fiber has basically been studied clearly.

There are many ways to use it.

In fact, the use of carbon fiber sheets in automobiles is to use resin to shape carbon fibers and then use them.

It's just that because of the special nature of automobile manufacturing, the formula ratio and blending method are different from ordinary carbon fiber materials.

As the jewel in the crown of heavy industry, automobile manufacturing has always been a market in which major countries are constantly fighting.

However, because the pursuit of speed is not as great as Earth Star, Blue Star's carbon fiber has not yet entered this market.

The advantages of carbon fiber are excellent, but the weaknesses are too obvious.

There is no way to change these shortcomings.

The only way is to ignore the shortcomings.

What is expensive, if you have money, you are not afraid of being expensive.

What is damaged cannot be repaired and can only be replaced with a new one. If you have money, you are not afraid of damage.

What production costs are huge, if you have money, you are not afraid of high costs.

To sum it up is one point, if you have money, you are not afraid of spoiling it.

Lin Xuan briefly talked about the resin solidification method of carbon fiber used in the automotive field.

Several modifiers understood what was going on after listening.

But the rich second generation heard it in a cloud.

To put it bluntly, there is no professional production method for carbon fiber sheets.

Instead, a one-part, one-mold approach is used.

If this car is a mass-produced car, it will be made of metal permanent molds.

If it is not a mass-produced car but a handmade car, then use a one-time mold to make it.

There is no other way.

Because the metal permanent mold is too expensive, the manual cost has soared, even if it is a mass-produced car, it will not be produced in a particularly large number.

Because once the mold is scrapped, there is no plate to replace.

Lin Xuan also talked about his modification ideas, and then drew the appearance of two cars on the blueprint.

That's right, this is the effect Lin Xuan wanted.

Change the blue lotus to the shape of Hennessey Lamborghini Venom.

Transform a Horford C90 into the shape of a Ferrari Enzo.

Everything on the shell is only handmade, including the glass.

All use thermoplastic technology.

How difficult this thing is to make, even a few rich second generations can imagine it.

Just how to make the glass that matches the car is a very difficult thing.

Fortunately, it is not mass-produced, so experienced masters can make it by hand.

The parameters have already been sent out, and they have placed an order here, and it is estimated that the first batch of test models will be delivered in three days.

If it doesn't fit, you have to do it all over again.

For Ferrari, the use of carbon fiber has only begun in the F50 era.

As a monocoque muscle car, the F50 was epoch-making and would have been the pinnacle of Ferrari history.

However, in the next generation, Enzo appeared, and the technologies used by Enzo were made with the best of Ferrari technology.

This is not so much a modification of the car as it is a re-engineering of the car using two chassis.

Lin Xuan wrote down all the parts that needed to be made one by one.

Almost all equipment except the chassis has to be redone.

After finishing writing, Lin Xuan marked two prices on the day shift.

"This venom requires a modification cost of 700 million."

"This Enzo needs to be modified for 700 million yuan."

"It's too late for you to quit now."

The yellow-haired youth: "It's only 700 million. It's the price to buy another car. It's a good deal to change it to a unique sports car."

Another car owner also nodded: "700 million is only 100 million more than the brand new Qinglian."

"Go ahead."

"The money has already been transferred to this card, how will you pay for the modification fee, Master Lin?"

Lin Xuan stepped back tactically: "The modification fee is already included in it, you don't think I will charge a separate fee, do you?"

It's just changing to the shape of the Venom, and it's not really a new Venom.

To really build a Venom, Lin Xuan didn't even want to lift it without two hundred million soft sister coins.

If you want to change the venom, this Qinglianhua can't even use the chassis, maybe only the exhaust pipe and the wires inside can be used.

Lin Xuan: "However, I want to take the cash away."

The 25-year-old young man smiled: "I heard that Master Lin is a person who doesn't like high technology and doesn't even use a mobile phone. I didn't expect him to be a real expert who doesn't even use a bank card. Okay, cash."

"After the modification is completed, the modification fee must be converted into cash and put here."

Soon, the first batch of materials arrived.

Lin Xuan started to take all the workers and modifiers to make parts.

"The easiest way to shape these shapes is to use clay to make the shape, wait for the clay to dry, and then start heat molding."

When Lin Xuan was in Dixing, he had seen videos of other people making sports cars by hand.

Because carbon fiber is so expensive, the Nabo people used the same method, but with glass fiber.

Things like fiberglass, if you touch it for a day, you will get pneumoconiosis if you inhale it into your lungs.

The key is that the strength of the material is also low, and it needs to be made very thick, so it is better to use iron sheets.

But the process is the same.

At that time, Lin Xuan knew about some thermoplastic techniques.

Later, Lin Xuan activated the ability of "stop at the limit", and returned to Earth Star to study car repair and modification, and did this specifically.

It is actually not difficult to do.

The only difficulty is...expensive!

The disposable mold of clay sculpture can only be used once, and it will be scrapped after one use.

There is no way to make a second set of the same thing by hand.

So if the car is scrapped, there is no way to replace or repair it.

If you insist on repairing, you can only replace it with a metal shell.

Soon, the original panels of both cars were removed.

Lin Xuan carefully observed the endoskeleton.

"This kind of car uses an endoskeleton, and it's these metal frames that take up the force."

"The outer panels have only three functions."

"pneumatic."

"Protect internal components."

"Beautiful."

There is no security at all with these panels.

Of course, there is no security in design, but it is actually useful for security.

That is, it can be used as a buffer when it hits.

When Lin Xuan came over, exoskeleton cars had already appeared on the planet Earth. To put it bluntly, they were designed like tanks, using exoskeletons.

The so-called endoskeleton and exoskeleton actually come from the difference between insects and beasts and dragons.

Both beasts and dragons are endoskeletal organisms, and the skeleton supports the body.

Insects are exoskeleton organisms, without bones inside, and are supported by the outer armor.

Since these cars are all exoskeleton machines, the plates don't really matter.

Lin Xuan observed the endoskeleton of the entire car, and drew a line on it: "All the places where the lines are drawn are sawed off."

These endoskeletons were also redone.

Because the original car is similar to the ground star model that Lin Xuan is going to make, only the chassis is similar, and the model is different.

So the endoskeleton also had to be redone.

When a sports car is completely disassembled, it is possible to see how many parts there are.

All parts are disassembled.

The external panels are plasticized by skilled workers.

They are proficient in making such large-scale molds very quickly.

The details of the interior decoration are all done by the refitter.

Modifiers are familiar with this.

Lin Xuan is more of a construction worker and overall control.

Lin Xuan will only do things that these people don't know how to do.

This whole day's live broadcast is simply a benefit for industry lovers, handicraft lovers and model lovers.

On the first day, only the mold was made, and the boards were not made at all.

At night, Lin Xuan and An Luyao returned to the camp.

After dinner, Wang Yujiang announced today's revenue.

Lin Xuan, An Luyao's combination is zero.

Only those three groups who stayed in the Challenger House for a while knew that they thought it was going to be over, but in fact it was not over.

And on this day, Xiao Huang and Ma Yiwei suddenly appeared.

The song that Xiao Huang wrote when his mind exploded in the morning was sold for a high price of [-] yuan!

It reached the second in an instant, overshadowing the subsistence allowance combination.

Wang Yujiang and Tang Xiaomi's income today is still the same as usual, earning several thousand yuan.

Instead, it was surpassed to fourth place.

The combination of Tang Muyang and Li Shufang continued their business meticulously, and they still got so much money.

The Wang Qiang and Wang Jian Group still went to the construction site to sell boxed lunches today.

And the income is visible to the naked eye.

Their box lunches have been approved by workers at nearby construction sites.

More and more people are eating.

The challenge continues.

The next day, the carbon fiber and resin are put on the mold and heat molding begins.

This process lasted all day.

On the third day, Lin Xuan began to lead the refitters to make various small components.

The skilled workers continued to make thermoplastics. With the experience of the second day, they still made a lot of panels after Lin Xuan got rid of them on the third day.

With the finalization of the first batch of panels, Lin Xuan rinsed off the clay sculpture with water to check the first panel.

Well done.

Handmade is handmade, more delicate than mechanical.

The only problem is that these people don't do this all the time, so some of the dimensions and curvature of the first batch of boards are not up to standard, so they are reworked.

Those that are done well become waste products.

After the carbon fiber thermoplastic is finished, there is no way to re-thermoplastic.

These losses are all calculated by Lin Xuan.

On the fourth day, the first batch of successful boards were taken out one after another.

The car that has been dismantled into shelves is finally about to fill up again!
(End of this chapter)