Start with the aviation industry

Chapter 45 The plan is completely feasible
Some people had already stood up and were about to end the meeting. At this moment, they abruptly stepped back and looked at Lin Feng.

who is this!

Being so young, he should be a newcomer who has just started working for a few years.

The Phoenix Factory is so big, with thousands of people. Those who know Lin Feng are basically limited to Workshop 406, and Jiang Haitao is the only one who knows Lin Feng in Workshop 406 in this conference room.

Most people don't know Lin Feng.

Wang Tianfang recognized it at a glance, and Lin Feng left a deep impression on him last time.

If there was no Lin Feng last time, the head office might have known about the idleness of the imported five-axis linkage CNC machine tool. How could he know that Lin Feng performed amazingly, not only could skillfully operate the machine tool, but also perform CNC programming on the spot, which was beautifully completed. Processing of test pieces.

Wang Tianfang seemed to have hope in his heart, "Xiao Lin, do you really have a way to determine the fault location?"

Everyone has been discussing for so long, and there are quite a few professor-level senior engineers. Even so, they have not come up with countermeasures for the time being. Can Lin Feng surprise everyone?

Facing so many people, many of whom are leaders, such as the workshop director, technical director, director of the engineering technology department, section chief, etc., Lin Feng did not feel nervous at all, and he was very generous.

His voice was also very loud, and he replied affirmatively, "Yes, I have a way to determine the fault location."

After finishing speaking, regardless of other people's reactions, he walked forward and picked up a piece of chalk.

There is a blackboard in the meeting room, as well as chalk, chalk erasers and other things. On this blackboard, Lin Feng brushed dozens of strokes very quickly, and the schematic sketch of the combustion chamber receiver was drawn.

This move made many people's eyes shine. If it were them, they might not be so fast, or they might not be so proficient.

Freehand sketches!
Here's a sketch of the combustor case!

Everyone's eyes were attracted, they all looked at Lin Feng or the sketch on the blackboard.

Lin Feng said in a clear voice, "The first thing to do to repair the oil leaking part of the combustion chamber casing is to find the faulty part. I have a solution."

"Everyone has seen a bicycle repairer repairing a tire. If the inner tire of a bicycle is broken, the master will inflate the inner tube and then put the inner tube into the water. The part where the air bubbles are the damaged part..."

Lin Feng was clear in thinking, well organized, and talked eloquently, talking about his methods.

Only half of the lecture was given, and the specific method was not mentioned yet. A few people's eyes lit up slightly, including Wang Tianfang and the two professor-level senior engineers.

The two senior engineers talked softly and nodded from time to time.

Yup!

How did we not find it!

Lin Feng said, "We can block these places of the combustion chamber casing, pass compressed air of two or three atmospheres, and then put the entire combustion chamber casing into water. Wherever bubbles come out, it will be slippery." The part where the oil leaked..."

Combining the sketches he drew, Lin Feng explained the specific operation methods in such detail that everyone could listen.

The originally quiet conference room became commotion, and gradually became lively. Some people suddenly realized, and some people were discussing and exchanging their views.

"Oh, such a simple method, why didn't I think about it!"

"This method is good, and the operability is also strong!"

"Finally able to determine the fault location."

"..."

Lin Feng had finished speaking, and the meeting room was completely lively, buzzing and noisy.

Wang Tianfang nodded, and looked approvingly at Lin Feng who had already sat back in the corner, Xiao Lin was good, and helped us solve another big problem.

After a few minutes, when it was almost time for everyone to discuss virtue, Wang Tianfang coughed a few times, raised his hand and pressed down.

As you all know, Mr. Wang is going to speak.

The noisy conference room gradually quieted down.

Wang Tianfang said, "What do you all think? Is the method Xiao Lin mentioned feasible?"

Wang Tianfang felt that this method was feasible, but he agreed to brainstorm and express his opinions to everyone.

"Mr. Wang, I think this method is possible, and it is not difficult to operate."

"I also think there is no problem."

"Director Wang, I think you can give it a try."

"..."

Two professor-level senior engineers, the director of the engineering technology department, the director of the design department, etc., expressed their opinions one after another.

Unanimously agreed with Lin Feng's plan.

Wang Tian felt confident, nodded, and said loudly, "Let me introduce it. It is Xiaolin from workshop 406 who proposed this plan."

"Lin Feng is a process technician in the 406 workshop, and also the technical backbone of the workshop. He has a high level of CNC machining. Our imported five-axis linkage CNC machine tool is technically in charge of Xiao Lin."

As soon as Wang Tianfang's voice fell, Jiang Haitao, who had never had a chance to speak, stood up.

"Lin Feng is the technical backbone of our workshop. The workshop focuses on cultivating objects. With the idea of ​​cultivating young people and increasing their knowledge, I brought Lin Feng to this meeting. I didn't expect to give us such a big surprise..."

Lin Feng performed well. As the technical director of the workshop, Jiang Haitao was so happy, his face was full of red, and he had more face.

It never occurred to him that if Lin Feng did this to him, he would embarrass workshop 406!
Many people looked at Lin Feng, some with admiration in their eyes, and some with envy in their eyes.

It is indeed enviable to be praised by the leader in front of so many people.

What about Lin Feng?
Of course he was happy, but he didn't get carried away. He sat there with a humble expression, looking steady.

Wang Tianfang said, "Xiao Lin is good, and the plan he provided is even better, then we will follow the plan Xiao Lin said, and we must determine the faulty parts of the three receivers as soon as possible."

He began a series of division of labor and work arrangements.

For example, the assembly workshop removed all the combustion chamber casings of the three turboprop six engines, cleaned them, and sent them to the sheet metal workshop.

As for the sheet metal workshop, start to make preparations, and follow the plan provided by Lin Feng as soon as the things arrive.

After talking about this, Wang Tianfang said, "Hurry up and act separately."

"Dismiss!"

The meeting lasted for about two hours, and finally the meeting ended. Thirty people walked out of the meeting room and took action immediately.

Lin Feng originally wanted to go back to the 406 workshop after the meeting to send down the necessary CNC programs, and try to write at least one or two thousand words on the computer before leaving get off work.

As soon as he walked out of the meeting room, Wang Tianfang stopped him, "Xiao Lin, come with us to the sheet metal workshop."

Suddenly, some people became envious again!

Mr. Wang called it himself, what a face, it is simply extremely honorable.

Lin Feng knew that it was impossible to go back to workshop 406, so he followed Wang Tianfang and others to the sheet metal workshop.

The plan was proposed by Lin Feng. Lin Feng completely gave up the idea of ​​returning to the 406 workshop. He also wanted to see the inspection status of the three combustion chamber casings, whether it was the same as the system said, and the faulty parts were all in the same place.

　Thank you "Rabbit Flower Planter" book friend for the reward of 100 coins!Thanks for supporting our book!

　　
　
(End of this chapter)