Start with the aviation industry

Chapter 115 Can You Design It?

Cai Wenhao came over soon, "Boss, you are looking for me."

Now he is full of energy.

Since Lin Feng gave everyone a bonus of 50 yuan and described a bright future, not only Cai Wenhao, but almost everyone is similar.

Lin Feng waved, "Come here and have a look at the two design drawings."

After all, he knows technology, and he said in surprise after just one glance, "Boss, this is the general design drawing of the CNC broaching machine."

Lin Feng nodded and said, "Yes, take a look at the general design drawing of the CNC broaching machine carefully."

Cai Wenhao looked carefully, Lin Feng gave him enough time, and after about ten minutes, he said with admiration, "Boss, where did you get the design drawing, this CNC broaching machine is designed It is too advanced and has a very high technical content. I bet that there is absolutely no such CNC broaching machine in China, and it is at least quasi-first-class in the world.”

Lin Feng said, "You are too conservative, not only the first-class, but the first-class."

Just kidding, this is the system design.

The products produced by the system must be high-quality products. Even though Lin Feng doesn't know the level of advanced CNC broaching machines in western developed countries, he can be sure that this CNC broaching machine is at least world-class.

"Director Cai, if we manufacture this CNC broaching machine, what do you think?"

Cai Wenhao looked at Lin Feng in surprise, seriously thinking that he had heard wrong.

After a few seconds, Cai Wenhao sighed, "If I can produce it, then my life will be worth it."

Lin Feng said, "Since that's the case, how about we work hard to manufacture it?"

Cai Wenhao gradually calmed down, then slowly shook his head, and reminded, "It's almost impossible, our foundation is too weak, and we don't meet this requirement at all."

Of course, Lin Feng also knew that the current foundation was not good enough, and maybe it was too early to talk about manufacturing, so he said, "Then let's design it first, and I will give you these two general design drawings. How about a technician carrying out the design according to the general design drawing?"

Cai Wenhao still seemed a little worried, "Boss, our technical strength is too weak. Even if we have a general design drawing, it may be difficult to design this CNC broaching machine."

Lin Feng pondered.

This is the truth. There are only a few technicians in the technical room of the equipment branch factory. Even if there is a general design drawing, they do not have the technical strength to completely design the CNC broaching machine.

It seems that before expanding the technical strength of the equipment branch factory, he still has to rely on himself, such as drawing out the design drawings of some important and key components one by one.

Lin Feng said, "Take these two design drawings away first, understand and digest them, and try to carry out the specific design work. I will find a way to get some technicians to come over."

There are not many technicians in the equipment branch factory, but there are many in the Phoenix factory. In addition, it would be great if they could recruit some from outside.

It’s just that it’s 1990, and there are no job fairs or job sites, so it’s up to you to run.

I guess I'll be busy next time.

It seems that the human resources department needs to be established as soon as possible, and I can't let my boss go to poach people here.

The two general design drawings were still handed over to Cai Wenhao, and Lin Feng repeatedly told him that he must keep them secret and not leak the drawings.

The possibility of leaking secrets should be small. This is the Phoenix Factory, a large military industrial enterprise. The confidentiality system is relatively complete, and the employees have a relatively strong sense of confidentiality. There are armed police standing guard at the gate of the factory.

Not long after, the first batch of rough-processed blanks also arrived at the equipment workshop. They were the blanks of the compressor wheel of the turboprop six engine, made of aviation stainless steel, and there were more than [-] die forgings. The equipment branch factory completed the rough processing before heat treatment. processing.

Each blank is very heavy, weighing more than 406 kilograms each. The rough machining is mainly turning. After several turning processes, the rough machining is completed, followed by heat treatment, and then goes to the [-] workshop for semi-finishing and finishing.

There was no work to do for a long time, and today's equipment branch is different. Two of the horizontal ordinary lathes are working and rough machining this batch of parts.

Factory office building.

Technical deputy director and chief engineer Wang Tianfang knocked on the door and walked into the office of top leader Sun Jiangbo, "Director Sun, there is something I want to report to you."

Sun Jiangbo was reading a newspaper, put down the newspaper in his hand and said, "Comrade Tianfang, tell me what's going on."

Wang Tianfang showed a worried expression, "The production of turboshaft [-] has been fully started. In the future, there will be imported turbofan engines. Many blades and turbine disks will be broached. Our current broaching machines are obviously old and behind."

Sun Jiangbo said, "Yes, they are all broaching machines imported from abroad in the 70s and [-]s. They are obviously old and their processing accuracy is also declining."

Wang Tianfang said, "Therefore, it is very important to import an advanced high-precision CNC broaching machine. Even if it is more expensive, we must buy it."

Sun Jiangbo said, "However, the Germans have clearly told us not to sell."

Wang Tianfang said, "In addition to the broaching machine company in Germany, there is also a powerful broaching machine manufacturing company in France. I have already asked the agent in Singapore to contact the other party. Maybe there is hope to import a machine from this French company. CNC broaching machine."

"Wow, this is a good thing." Sun Jiangbo immediately became happy.

The original hope of importing CNC broaching machines has been shattered, but now hope has risen again. If it is really possible to import CNC broaching machines from this French company, it is also a good choice.

Unfortunately, reality is often cruel.

The next day.

Not long after Wang Tian let go of a meeting and returned to his office, the phone on the desk rang hastily.

This is an international call.

Those who can make and receive international calls, there are not many telephones in the entire Fenghuang factory. As the technical deputy director and chief engineer, Wang Tianfang only has such a telephone in his office, and the color is also white, and the red telephone next to it The colors are different.

"Hello, I'm Wang Tianfang."

"Mr. Wang, our hope of importing CNC broaching machines from France has also come to naught. Even if we buy it in the name of this manufacturing company in Singapore, they have clearly replied that they will not sell it."

what!
It's not for sale!

After answering the call, Wang Tianfang was visibly disappointed, and the hope that had been raised was shattered again.

He sat blankly on the office chair and didn't come back to his senses for a long time.

It wasn't until the knock on the office door that he came back to his senses, and his tone was a little low, "Come in."

The door of the office was gently pushed open, and it was Lin Feng who came in, holding two large drawings in his hand.

(End of this chapter)