Take control of thunder and lightning from Hogwarts
Chapter 301 Invitation
Chapter 301 Invitation
Soon, the drill bit cuts out a round copper piece slightly larger than a coin from the metal plate, and clamps it tightly, and then passes the round copper piece to the grinding machine next to it, and the grinding machine starts to grind the copper piece .
After a while, the disc with both sides initially polished and smooth was manipulated by magic to approach the micro-carving knife, and the micro-carving knife began to engrave runes along the pre-set template.
This time is quite long, because the miniature carving knife not only needs to draw magic lines on the material, but also import magic power at a stable and uniform rate.
However, at this point, Anduin also discovered a problem. Because the lathe will produce slight vibrations during operation, the micro-cutter connected to the lathe will also vibrate. This instability will cause the inscribed runes There is a gap.
After waiting for a long time, the miniature engraving knife inscribed with runes finally finished its work, and then the round copper sheet was also guided to the grinding machine for polishing and polishing. The final product presented was a bright metal round with engraved runes. The piece is a circle larger than a normal coin, and it is also quite thick.
Anduin took off the finished product and took a closer look at it.
Sure enough, the spell lines on the protective amulet were much thicker than expected, and the lines appeared uneven in thickness.
"I don't know if it can still be used, but I can feel the magic power fluctuations from the finished product."
After observing for a while, Anduin decided to give it a try, and then brought the amulet to the test range, and fixed the amulet on a humanoid target not far away.
"Passed out!"
He shot a stun spell at the amulet, and when the spell approached the protective amulet, the metal disc immediately propped up a circular shield and collided firmly with the stun spell.
Then, the shield broke.
"The stress rune is in effect, the power of the Iron Armor Curse has been affected, and it has been greatly weakened, isn't it?"
"I don't know if the vibration of the lathe can be solved with the Ripple Repelling Curse. If it doesn't work, the micro engraving knife must be separated from the main body of the lathe, otherwise the engraving accuracy will never be improved."
"And the processing efficiency of the lathe is also a problem. Just now, it only took 10 minutes to process a defensive talisman. If calculated at this speed, only 3 talismans can be produced in an hour, or 72 in a day."
"This is not particularly fast. You must know that the runes on the defensive amulet are relatively simple. If it is replaced with other products, it will definitely be slower."
"It takes the longest time to engrave runes during processing. It seems that if you want to improve efficiency, you have to install a miniature carving knife."
"Hey, to make a miniature carving knife, you need to use Fairy Ulim steel. I still have a lot of uses for this precious material, so let's make one more first, and increase the production efficiency to a certain level."
"In short, make sure that the lathe can be used normally after it is connected to the circuit. Today's harvest is already big enough. The problems in the processing process are small troubles, just adjust it slowly." Anduin was summarizing the experiment of the magic lathe, feeling that he really It's a bit greedy.
Now the magic power transformed by electrifying the wild thunder magic text can drive the magic lathe, and the alchemy props produced can be used, which also confirms what he has always imagined.
As long as the lathe is adjusted to be able to produce stably, then his alchemy workshop can be formally established.
So in the next few days, Anduin concentrated his energy on improving the magic lathe. He engraved the ripple expulsion spell on the lathe, and installed a pair of automatic miniature carving knives at the same time.
Then, after intensive testing several times, the magic lathe was finally able to process alchemy props more stably.
Although the quality of the finished product is not up to the level of his own production, it can also meet normal use.
For example, a defensive talisman can resist a stun spell with a strength of up to 80 points. You must know that the standard level of stun spell fired by a wizard is only 40 points. That is to say, this mass-produced defensive talisman can block two stun spells on average. .
And just when Anduin finished debugging the magic lathe, Moody and Arthur he had made an appointment with also arrived.
"Haha, boy Anduin, your house is really not bad. It's too embarrassing for you to remember to invite me after you moved here for so long."
Moody still looked carefree, once he entered Anduin's house, he leaned on his crutches to fumble around, and did not forget to tease him during the process.
"It's my fault, but I've been so busy since I moved in, you and Arthur are the first guests to come to my place, by the way, what do you want to drink, I have a few unopened bottles Red currant rum." Anduin went to the wine cabinet next to it, and added, "Of course, it's left by the previous owner, and I don't have the habit of drinking it either."
"Hey, you don't need to tell me this specifically, I don't care if you drink or not, but you seem to be over 16 years old, and you are considered an adult at this age in the wizarding world."
Moody cheerfully leaned over to the tea table, sniffed drunkenly after taking the wine glass from Anduin, and then glanced to the side, "Arthur, come and sit, there is good wine I don't know how to cherish it, but why do you bring a child when you come to Anduin's house?"
"Anduin is Ginny's godfather. We haven't seen each other for a year, so I'll bring her here to have a look." Arthur tilted his head casually, and then turned his head, "Ginny, let go, don't keep holding her The dog is gone."
Although Anduin invited the two of them, Arthur didn't come here alone today. He actually took Ginny with him, and Ginny set his sights on Hogg after arriving at Anduin's house.
Then Hogg was in a tragedy. He was planning to rest for the day and not to cause trouble, so he lay on the window sill in the living room to bask in the sun, but he was woken up by someone while he was still asleep. When he woke up, he saw It was Ginny, and all of his souls flickered immediately. This is a narrow road to the enemy. The most terrifying nightmare he had this year was dreaming of this girl.
And Ginny actually still remembered Hogg, and just like last year, she grabbed the dog's tail tightly when she came up.
"Let go, Ginny, you almost stripped the dog's tail off." Arthur crouched helplessly next to Ginny, persuading in a soft voice.
"No, I want a dog. The dog will play with me." Ginny pouted, her eyes fixed on Hogg, and she wouldn't let go no matter how much Arthur persuaded her.
"It's okay, Arthur, just let Hogg play with Ginny for a while. Although Hogg is big, he won't bite." Anduin looked at the downcast Hogg with a smile, and then he came over, Spread your hands tentatively, "Hi, Ginny, remember me?"
Who knew that as soon as Ginny saw Anduin, she immediately shook off Hogg's tail and threw herself into Anduin's arms.
(End of this chapter)
Soon, the drill bit cuts out a round copper piece slightly larger than a coin from the metal plate, and clamps it tightly, and then passes the round copper piece to the grinding machine next to it, and the grinding machine starts to grind the copper piece .
After a while, the disc with both sides initially polished and smooth was manipulated by magic to approach the micro-carving knife, and the micro-carving knife began to engrave runes along the pre-set template.
This time is quite long, because the miniature carving knife not only needs to draw magic lines on the material, but also import magic power at a stable and uniform rate.
However, at this point, Anduin also discovered a problem. Because the lathe will produce slight vibrations during operation, the micro-cutter connected to the lathe will also vibrate. This instability will cause the inscribed runes There is a gap.
After waiting for a long time, the miniature engraving knife inscribed with runes finally finished its work, and then the round copper sheet was also guided to the grinding machine for polishing and polishing. The final product presented was a bright metal round with engraved runes. The piece is a circle larger than a normal coin, and it is also quite thick.
Anduin took off the finished product and took a closer look at it.
Sure enough, the spell lines on the protective amulet were much thicker than expected, and the lines appeared uneven in thickness.
"I don't know if it can still be used, but I can feel the magic power fluctuations from the finished product."
After observing for a while, Anduin decided to give it a try, and then brought the amulet to the test range, and fixed the amulet on a humanoid target not far away.
"Passed out!"
He shot a stun spell at the amulet, and when the spell approached the protective amulet, the metal disc immediately propped up a circular shield and collided firmly with the stun spell.
Then, the shield broke.
"The stress rune is in effect, the power of the Iron Armor Curse has been affected, and it has been greatly weakened, isn't it?"
"I don't know if the vibration of the lathe can be solved with the Ripple Repelling Curse. If it doesn't work, the micro engraving knife must be separated from the main body of the lathe, otherwise the engraving accuracy will never be improved."
"And the processing efficiency of the lathe is also a problem. Just now, it only took 10 minutes to process a defensive talisman. If calculated at this speed, only 3 talismans can be produced in an hour, or 72 in a day."
"This is not particularly fast. You must know that the runes on the defensive amulet are relatively simple. If it is replaced with other products, it will definitely be slower."
"It takes the longest time to engrave runes during processing. It seems that if you want to improve efficiency, you have to install a miniature carving knife."
"Hey, to make a miniature carving knife, you need to use Fairy Ulim steel. I still have a lot of uses for this precious material, so let's make one more first, and increase the production efficiency to a certain level."
"In short, make sure that the lathe can be used normally after it is connected to the circuit. Today's harvest is already big enough. The problems in the processing process are small troubles, just adjust it slowly." Anduin was summarizing the experiment of the magic lathe, feeling that he really It's a bit greedy.
Now the magic power transformed by electrifying the wild thunder magic text can drive the magic lathe, and the alchemy props produced can be used, which also confirms what he has always imagined.
As long as the lathe is adjusted to be able to produce stably, then his alchemy workshop can be formally established.
So in the next few days, Anduin concentrated his energy on improving the magic lathe. He engraved the ripple expulsion spell on the lathe, and installed a pair of automatic miniature carving knives at the same time.
Then, after intensive testing several times, the magic lathe was finally able to process alchemy props more stably.
Although the quality of the finished product is not up to the level of his own production, it can also meet normal use.
For example, a defensive talisman can resist a stun spell with a strength of up to 80 points. You must know that the standard level of stun spell fired by a wizard is only 40 points. That is to say, this mass-produced defensive talisman can block two stun spells on average. .
And just when Anduin finished debugging the magic lathe, Moody and Arthur he had made an appointment with also arrived.
"Haha, boy Anduin, your house is really not bad. It's too embarrassing for you to remember to invite me after you moved here for so long."
Moody still looked carefree, once he entered Anduin's house, he leaned on his crutches to fumble around, and did not forget to tease him during the process.
"It's my fault, but I've been so busy since I moved in, you and Arthur are the first guests to come to my place, by the way, what do you want to drink, I have a few unopened bottles Red currant rum." Anduin went to the wine cabinet next to it, and added, "Of course, it's left by the previous owner, and I don't have the habit of drinking it either."
"Hey, you don't need to tell me this specifically, I don't care if you drink or not, but you seem to be over 16 years old, and you are considered an adult at this age in the wizarding world."
Moody cheerfully leaned over to the tea table, sniffed drunkenly after taking the wine glass from Anduin, and then glanced to the side, "Arthur, come and sit, there is good wine I don't know how to cherish it, but why do you bring a child when you come to Anduin's house?"
"Anduin is Ginny's godfather. We haven't seen each other for a year, so I'll bring her here to have a look." Arthur tilted his head casually, and then turned his head, "Ginny, let go, don't keep holding her The dog is gone."
Although Anduin invited the two of them, Arthur didn't come here alone today. He actually took Ginny with him, and Ginny set his sights on Hogg after arriving at Anduin's house.
Then Hogg was in a tragedy. He was planning to rest for the day and not to cause trouble, so he lay on the window sill in the living room to bask in the sun, but he was woken up by someone while he was still asleep. When he woke up, he saw It was Ginny, and all of his souls flickered immediately. This is a narrow road to the enemy. The most terrifying nightmare he had this year was dreaming of this girl.
And Ginny actually still remembered Hogg, and just like last year, she grabbed the dog's tail tightly when she came up.
"Let go, Ginny, you almost stripped the dog's tail off." Arthur crouched helplessly next to Ginny, persuading in a soft voice.
"No, I want a dog. The dog will play with me." Ginny pouted, her eyes fixed on Hogg, and she wouldn't let go no matter how much Arthur persuaded her.
"It's okay, Arthur, just let Hogg play with Ginny for a while. Although Hogg is big, he won't bite." Anduin looked at the downcast Hogg with a smile, and then he came over, Spread your hands tentatively, "Hi, Ginny, remember me?"
Who knew that as soon as Ginny saw Anduin, she immediately shook off Hogg's tail and threw herself into Anduin's arms.
(End of this chapter)
You'll Also Like
-
My dear brother Hou Liangping, is he killing his own brother for the sake of justice? The country wi
Chapter 61 2 hours ago -
Daily life in anime: I use my inner power to exorcise demons
Chapter 65 2 hours ago -
The chat group opens the can and starts with the Golden Saint!
Chapter 125 2 hours ago -
After Rebirth, Boss, She is Beautiful and Sassy
Chapter 281 5 hours ago -
Beastmaster: I’m Really Not a Master of Training
Chapter 176 5 hours ago -
Fairy Tail: Encountering Auguste at the Beginning
Chapter 53 10 hours ago -
Surpass Yourself from Demon Slayer
Chapter 189 10 hours ago -
I'm a loser at the beginning, luckily I have unlimited skill points
Chapter 185 10 hours ago -
The whole family villain reads my mind, and the milk ball baby becomes the group pet
Chapter 191 10 hours ago -
Build a Xiuxian University and start an era of Xiuxian for all people
Chapter 191 10 hours ago