Hand rubbing nuclear fusion live in the wilderness

Chapter 222 Live Photolithography Machine?

Chapter 222 Live Photolithography Machine?

Before Won finished speaking, some viewers in the live broadcast room raised questions.

[Speaking of which, if a plane flies in the sky, it needs satellite signal guidance, right?Anchor, you haven’t even launched the satellite yet. 】

[Upstairs, don't say that the plane is flying in the sky, even if your car is running on the ground, it needs a signal. 】

[My old car is not used, it is all manual, and there is no computer in it. 】

[Equipment for manufacturing computers?Is it a lithography machine? (ω )y. 】

【Probably! 】

[Live photolithography machine?I don't believe it, it was really created and I live broadcast the cesspit butterfly! 】

【Good guy, did you stand upside down and eat shit in exchange for a cesspit butterfly stroke? 】

[Don't talk about photolithography machines, etching machines, developing machines, coating machines, ion implanters, and any foreign countries will jump. 】

[If you really have this kind of technology, why don't the anchors return to China to play. 】

[Impossible, this is impossible!Unless the anchor is not from Earth, don't even think about making a lithography machine live? 】

[What if the anchor is really not from Earth? 】

[What are you all thinking about!What about lithography machines, the kind of cutting-edge ones with a few nanometers are missing!But can the anchor produce a few nanometers?There is no shortage of lithography machines with tens of nanometers in our country, okay? 】

Barrages were pouring in, and it was obvious that some of the audience had grasped the key points of Won's words.

Upgrade equipment for manufacturing computers.

It's obvious!
To make a computer, what is the core?
The core is the chip!

What is the core equipment for making chips?
It's a lithography machine!
Although the Korean won only clicked faintly, the number of people in the live broadcast room was counted in tens of millions.

There are always some people who will grasp the key points.

After realizing this key point, the live broadcast room suddenly became lively.

Not to mention the audience, even Huaguo's special operations team was moved.

Judging from the previous live broadcast, this anchor does not have to buy new technology, and it is an absolute new technology.

If the core manufacturing technology related to lithography machines is revealed in this live broadcast, then Huaguo will become bigger.

Don't forget the previous "ionization-metal ion implantation-high reflection. array", it seems that it can control the light source at the picometer level.

If this is achieved, in theory, he can compress the light wavelength of the lithography machine to the picometer level.

If this works out.

Fuck, is Huaguo still trying to be angry with other countries?

Looking at the barrage, Han Yuan didn't continue to explain.

The audience in the live broadcast room speculated that there was nothing wrong with this year's live broadcast, except for completing tasks and upgrading basic industrial equipment.

He will also try to manufacture lithography machines, etching machines, developing machines, ion implanters and other equipment to prepare for the next mission.

As for the problem of the guidance signal for the flight of the aircraft, although there is no satellite, there is naturally a solution.

Otherwise, the aircraft is built, it goes to the sky, and it flies around the planet, but in the end it can't find its own home. Wouldn't it be a tragedy to put a teacup on the coffee table?

Bringing the drawings, Han Yuan came to the hydraulic workshop.

The combined two-axis machine tool is also powered by a hydraulic + gear combination.

The M1-level multi-axis linkage processing instrument has to be powered by a large electric motor.

According to the drawings, the complete set is estimated to be as big as a basketball court.

This thing is already a large-scale combined processing equipment, and the hydraulic power of this small river can no longer move it.

In addition, the small hydraulic studio obviously couldn't fit in, so we had to build another room.

However, for this room, Portland concrete will not be used in the construction again, which is too time-consuming.

This time, Won directly adopted the structure of a steel bar factory building.

The pillars and frames are made of alloy steel, and then large pieces of corrosion-resistant and high-temperature-resistant plastic plates are manufactured, which are directly enclosed.

It is enough to keep out the wind and rain and ensure that no rainwater enters the room.

After all, he doesn't have much time to spend on building houses now.
According to the drawings, Han Yuan reclaimed a forest area behind the hydraulic studio.

Clean up all the weeds and shrubs, dig out the roots and so on, and then sprinkle a layer of prepared rot root water, which can effectively prevent the regenerated roots of plants on the ground from sprouting and growing.

This kind of rot root water is something in the primary plant cultivation knowledge information.

The primary plant cultivation knowledge information contains not only nutrients to accelerate plant growth, but also anti-growth agents similar to rot root water.

It is similar to the pesticides used in human society, but the effect of rot root water may be better and safer.

Moreover, rot root water does not pollute the environment that much. Although it will not start to decompose naturally until five years later, it has a corresponding release agent.

If you want to make the land where the rot root water is used to plant crops or grow plants normally in advance, you only need to prepare some release agent and sprinkle it on the surface of the land, and the normal use can be restored within three days.

It took four days, relying on his superhuman physique and the exchange of materials in the system mall, Won successfully built a steel factory on the open space with an area as large as three basketball courts.

The alloy steel pipe thicker than the arm is used as the main support, firmly nailed in the gully, and reinforced with Portland cement.

The surrounding walls and roof are made of corrosion-resistant and high-temperature prefabricated plastic panels, which can be directly stacked on each other in a shingled manner and then fixed.

Although the project volume is large, the speed of construction is still very fast when the materials are sufficient.

In addition, there is not much technical content in building this, and there is no information to record.

Therefore, except for the fixed three-hour study time at night, Korean won was used to build the factory for the rest of the time.

On the fifth day, the reinforced factory building has been formed as a whole, only the Portland cement has not been laid in the factory building.

After paving the cement and setting it completely, the plant can be put into use.

The construction speed of the steel bar factory was so fast that the audience in the live broadcast room once doubted life.

In the case of one person, can such a large factory be built in four or five days?
[The labor efficiency of the anchor is a bit too exaggerated? 】

[In five days, a factory building was built, even if it was a simple steel factory building, this speed is too fast, right? 】

[Look stupid, with this efficiency, the anchor is probably a robot, right? 】

[This anchor is a ruthless working machine. After checking the working time of [-] hours a day, it is still manual labor. 】

[Terrible, really scary! 】

[Can humans really do this? 】

[I don't think it's a big deal. The anchor's materials are all prepared by the team. You just need to build them up like building blocks. I can do it myself. 】

[Holy shit, such a big steel pipe, why don't you try moving one?See if it wears you out. 】

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like