Reborn Great Nation Craftsman

Chapter 60 Zhang Junping's strictness

Zhang Junping was really afraid that they would be too scared to use it.

This thing is really dangerous, but it is really efficient.

A chainsaw can support the work of eight of them.

"When using a chainsaw, you also need to pay attention to the gigantic mouth!
The jaw of a chainsaw is bigger than that of a hand saw!
Generally speaking, the thickness of the saw blade is between [-] and [-] times of the thickness of the saw blade. If the thickness of the saw blade exceeds twice, check the degree of wear of the saw blade!
Of course, some softer, wetter wood stubs can be more than double that!
The reason why I say this is that when you play the thread alone in the future, you should consider the Dao Jukou in advance and leave a margin!
Otherwise it will be like this! "

As Zhang Junping said, he directly picked up a piece of wood that had been threaded just now and put it on the platform.

Press the desk button.

In the squeak, the plank was sawed open.

Turn off the chainsaw.

"Brother-in-law, measure it to see if there is any missing ruler!"

The eldest brother-in-law took a measuring stick, raised his head and said, "It's ten centimeters, is it okay?"

"Brother-in-law, your crutch should retire!

use me this! Zhang Junping shook his head speechlessly, and handed him his new crutch.

The eldest brother-in-law's crutches were already covered with rust, and the scales on it could not be distinguished without looking carefully.

Use such a ruler to measure the missing ruler of two millimeters, and it is strange that the energy comes out.

The eldest brother-in-law changed the ruler, measured it again, looked up and said, "It's okay! It's only two millimeters short!"

"Brother-in-law, it's only two millimeters away, you know, maybe just because you say it's only two millimeters away, the service life of a piece of furniture will be shortened several times or even ten times!
It was fine at first, but after using it for a while, the furniture would shake and damage the legs and feet!
Brother-in-law has been making furniture for a few years, right?

Why, in the past, old furniture did not use nails, and it would not shake for hundreds of years, but now some furniture obviously uses nails, but it starts to shake within a few years?
It's only two millimeters away from what you said, that's what caused it! "

"real or fake?"

"impossible?"

"Is it too exaggerated?"

The eldest brother-in-law and the others responded with expressions of disbelief.

"The millimeter is already a big gap, although I can now make a table or chair to test my claim.

However, we don't have that time to verify!

So, I ask, I ask you as the owner, you must ensure that the error is within millimeters.

It is best to control it within half a millimeter!

This is excellence!
Only by doing this, the lifetime warranty I promised before will not become a burden for us, and we will not lose money because of the lifetime warranty! "Zhang Junping once again showed his strength and said to everyone loudly.

Zhang Junping also knew that if he was so strong, he would definitely make them unhappy.

But not strong!

A group of idle rural Han, if they want to train them as their helpers, they must blacken their faces and harden their hearts.

To say that they are idle rural Han is not to look down on rural people. Zhang Junping himself is a rural person.

It is precisely because of this that he understands the rural people better.

Learn more about the temperament of rural people.

They are honest and kind, hard-working.

As long as it is not impossible to live, it will silently work hard day after day.

Just like the migrant workers of later generations, as long as they can get their wages at the end of the year, they can do the most tiring work and eat the most unpalatable meals.

This is both an advantage and a disadvantage.

The extremely strong ability to resist pressure also makes most of them muddle along.

Always thinking, it's almost done!

Such a person is definitely not what Zhang Junping wants.

Zhang Junping was not worried that they would quit because of his hard words.

Still the same sentence, rural people have unimaginable endurance, as long as they can eat enough and make money, these hard words are trivial things that are not worth mentioning.

What Zhang Junping has to do is to emphasize again and again, using brainwashing methods to instill his own production ideas.

Ultimately train them to be qualified carpenters, not carpenters.

"Don't think that I have high requirements, in ancient times, the requirements were higher than this!

In the face of the danger of beheading if they don't do it well, the craftsmen have exhausted all their thoughts to make it perfect!

In the age when the tools were backward, the ancients were able to make errors less than a hair away. Why can't we do it? "

"Okay, let's continue making the workbench!
I'll redo the line first! "Brainwashing doesn't happen overnight, it has to be done step by step, repeated and repeated.

Zhang Junping re-scribed the board.

"Using Taiju to cut the material, it is best to cooperate with two people, one standing at the other!
Brother-in-law, you stand over there and then, after I push the board over, you have to hold it with your hands and slowly pull it there! "

Zhang Junping was particular about it while demonstrating.

After all the materials for the two workbenches are ready, the eldest brother-in-law and other seven people have all started to operate it.

"This chainsaw is so handy!"

"Yeah! It's really fast work. If we saw these materials with a hand saw, we wouldn't be able to saw them all in one afternoon!"

"Not only is it fast, but the saw is straight and smooth!
No need for a planer! "

Looking at everyone who was excited and eager to try, Zhang Junping smiled, "Okay, you will have the opportunity to use it in the future, and it will be annoying for you to use it!
Now, according to the line I drew, to chisel the falcon's eye or make the tenon or the same sentence, when chiseling the falcon's eye or making the tenon, be sure to leave a margin and make fine corrections! "

After Zhang Junping explained, he began to draw lines on the prepared materials.

After drawing the line, hand it over to the eldest brother-in-law for processing.

"Pingzi, what are you painting? How do you do it?" The fifth brother was unlucky, and his turn was a relatively complicated tenon and mortise.

This kind of mortise and tenon is generally not used in furniture in rural areas. The fifth brother looked at the wood for a long time and didn't know how to start.

"This is called a tooth plate, and it is a part of the collet tenon!

It should be done! "Zhang Junping said and took it directly, and started to do it.

Making and explaining.

In fact, it doesn't take so much trouble to make a workbench. Zhang Junping also wanted to give them a little more chance to contact the production process of the tenon-and-mortise structure.

So a simple carpentry workbench was played by Zhang Junping.

Raglan mortise, right angle mortise, flat shoulder mortise, three mortise-and-mortise splicing methods are used just for wood splicing.

It's not that there are only four ways of splicing wood boards, but two workbenches, and only four ways can be used at most.

You can't just cut open a good wide plank for them to practice, and then let them splicing it together with tenon and mortise?
Even the tooth plates under the raglan, the tooth plates on the two workbenches, and the eight legs are all different.

After instructing the fifth brother, Zhang Junping instructed them one by one to process the mortise and tenon joints.

After seeing Zhang Junping's carpentry skills, the eldest brother-in-law and the others could not say anything else.

Some of the original complaints, but also vanished.

A college student, carpenters are better than them, and they are willing to teach them personally, what's not to be satisfied with?
　Thanks to the book friend [Ban Xian Gong] for rewarding again!

　　
　
(End of this chapter)