Douluo Zhijie lottery system

Chapter 917 917. Surprise (4000 words, two in one)

a day later.

Yang Ming opened his tired eyes and covered his aching head.

The madness between him and Liu Erlong last night was vivid in his memory, and even now, he still feels a little unbelievable.

"Am I being pushed against by Teacher Liu Erlong?"

Yang Ming prides himself that he is no longer the boy he used to be, but every time he recalls what happened last night in his mind, he still can't help but swear:
"What the f*ck is the f***ing surprise!"

While Yang Ming was a little speechless, the system also took the opportunity to jump out to check its presence, otherwise some people would forget that it, the master of the system, existed.

"Ding!"

"Congratulations to the host for saying the classic line of letting the bullet fly into Zhang Muzhi, and getting a chance to draw a lottery. Do you want to start the lottery roulette?"

"no!"

Yang Ming vaguely remembered that Let the Bullets Fly told the story of the gangster Zhang Muzhi who changed his name to the upright official "Ma Bangde" to become the county magistrate of Goose City, and started a fierce battle with the bully Huang Silang who guarded Goose City.

On the surface, this movie tells the story between officials, bandits, and people, but it is full of connotations, and it is very interesting to think about it carefully.

It's a pity that the world of Let the Bullets Fly is a low-level martial arts world, and the level of technology is not good. There is no valuable thing at all, and it is directly discarded by Yang Ming. According to the old rules, the number of lottery draws is kept, and one is drawn at a time for the next time. big.

Propping up his upper body from the bed, Yang Ming saw that Liu Erlong had just come out of the bathroom wearing a white bathrobe, her hair was still wet, and that loose bathrobe couldn't hide her proud figure, and she could always get out of the shock See the truth in a glance.

It was early in the morning, when a man was at his most vigorous, and Yang Ming immediately became energetic.

Liu Erlong sat on the side, wiping his hair, picked up a pipe, took a long breath, parted his red lips lightly, exhaled circles of smoke expertly, and said lazily:

"Yang Ming, you're an adult too, what happened between me and you last night was just an accident, everyone should forget about it."

Liu Erlong's attitude was unexpectedly indifferent, he neither became angry nor sad.

Sure enough, something like the sage model works equally well whether it is a man or a woman.

Yang Ming also understood in his heart that last night it was because Liu Erlong confided in the emotional outburst period and regarded him as the master Yu Xiaogang, so such absurd things happened. In fact, the relationship between the two of them is still pure .

Well, very pure.

Shaking his dizzy head, Yang Ming got off the bed clutching his kidneys.

Thirty is like a wolf, forty is like a tiger, fifty is like sitting on the ground and sucking up dirt, and sixty is like a wall sucking mice.

I have to say that what the ancestors said still makes sense.

Even Yang Ming has cultivated the body of a demigod now, and has the foundation of "Indestructible Sutra", his physical fitness is far ahead of his peers, but the next morning, he still feels kidney deficiency, and his legs are a little numb. soft.

"It's no wonder Teacher Liu Erlong has so much resentment towards Grandmaster. I'm afraid it's not just because Grandmaster keeps running to find Bibi Dong, but it's more likely that Grandmaster can't satisfy Teacher Liu Erlong."

But thinking about it, Master Yu Xiaogang is a research-oriented talent, and research is his field of expertise. Yang Ming has never seen how Master Yu Xiaogang has practiced, so his body has naturally fallen behind.

After hastily washing up in the bathroom, when Yang Ming came out again, there was no sign of Liu Erlong in the room, only the faint lingering fragrance of her body was still lingering in place.

"Tsk!"

Seeing this, Yang Ming couldn't say anything.

Anyway, it seems like he took advantage of it.

Leaving Shrek Academy, passing street vendors were yelling breakfast at passers-by. Yang Ming casually bought a breakfast, and while gnawing on a hot meat floss pancake, he headed towards the Xuanwu Hall of the Zhatian Gang.

After more than a month, Lou Gao, the master craftsman, is about to develop a new product. It is said that it is a new generation of equipment developed on the basis of the zero-character combat armor. Yang Ming has to go and inspect it himself.

If there is a new generation of soul tool equipment, the Zhatian Gang will be able to renovate the equipment, which will be of great help to the subsequent conquest of the remnants of the Star Dou Forest, the Spirit Empire and the Sea God Island battle.

Along the way, antique pavilions, bright and spacious pavilions, small and exquisite elegant rooms, etc. constitute a unique architectural complex, together with the quiet magnolia forest, ginkgo road, camphor trees, and rippling small bridges and flowing water, form a fascinating landscape. Beautiful scenery.

Xuanwu Hall is located on the west side of Zhatianbang. Looking past, there are gray tiles and white walls, a tall gate tower, exquisite carvings on the walls of the gate tower, and even more exquisite and beautiful carvings on the roof. The shade of the trees and the echo of the mountains make people feel like they are in a fairyland.

The sunshine of the morning sun drips like drizzle on the dreamy house in front of me, and spreads over every corner that has been dusted by the ages. The air is filled with the fresh smell of plants. Follow this smell and reflect into it. The pupils are moss-covered walls on the outer walls.

Fingers gently stroking the cool rocks are especially wonderful. Outside the window is a copper fence with a graceful figure. The top is slightly curled and branches like sunflower leaves make the rigid building blend with the surrounding woods. The gate Although the high-quality paint has been corroded due to ancient times, it has a vicissitudes of beauty. The golden doorknob shines with tiny lights under the sunlight. Although it is small, it seems to be able to penetrate people's hearts.

Yang Ming went straight to the manufacturing workshop. Yang Ming had already greeted the master craftsman Lou Gao earlier. As soon as he arrived at the manufacturing workshop, there were already workers starting work here, and it was a bustling scene.

Lathe processing is a part of mechanical processing. One is to use the turning tool to process the unformed workpiece during rotation, and the other is to fix the workpiece and perform precision machining through the high-speed rotation of the workpiece and the lateral and longitudinal movement of the turning tool.Drills, reamers, reamers, taps, dies and knurling tools can also be used for corresponding processing on the lathe.Lathes are mainly used to process shafts, disks, sleeves and other workpieces with rotating surfaces, and are the most widely used type of machine tool processing in machinery manufacturing and repair factories.A lathe is a machine tool in which a turning tool that performs a feed motion cuts a workpiece that performs a rotating main motion.The processing principle of the lathe is to install the tool and the workpiece on the lathe, and the relative motion between the tool and the workpiece is generated by the transmission and speed change system of the lathe, that is, the cutting motion, and the required parts are cut.The lathe has a wide range of processing, mainly processing rotary surfaces, such as turning outer circle, turning end face, grooving, drilling, boring, turning taper surface, turning thread, turning forming surface, drilling center hole and knurling, etc.

The advantage of this is that it is easy to ensure the accuracy of each processing surface of the workpiece; during processing, the workpiece rotates around a fixed axis, and each surface has the same axis of rotation, so it is easy to ensure the coaxiality requirements between the processing surfaces, and the cutting process is relatively stable; In addition to the intermittent surface, the lathe machining process is generally carried out continuously, unlike milling and planing. During one pass, the teeth cut in and out multiple times, resulting in impact. It is suitable for non-ferrous metal parts For some non-ferrous metal parts, due to the low hardness and good plasticity of the material itself, it is difficult to obtain a smooth surface with other processing methods, and the tool is simple; the turning tool is the simplest one among the tools. Sharpening and installation are very convenient, which makes it easy to choose a reasonable angle according to specific processing requirements.

Of course, this is modern lathe processing, and it is also the direction of Xuanwutang's efforts. Nowadays, due to the lack of soul guidance technology, most lathe processing uses this as a blueprint, and then replaces it manually.

Here, every blacksmith with a name and surname has his own studio. The master craftsman Lou Gao is usually responsible for the blueprint design of the zero-character combat armor, and assigns the work of forging the zero-character combat armor to the blacksmiths below. These blacksmiths further divide the labor and carry out the process of forging, assembling and painting here.

Under such a mechanism of division of labor and cooperation, the work efficiency of the blacksmiths is very high, which is why they were able to further obtain results on the basis of the zero-character combat armor in just over a month.

"Master, are you here?"

Before anyone arrives, the sound arrives first.

A short and fat old man ran over like a penguin. He was about 1.6 meters tall, but his waistline was probably 1.6 meters. He had protruding ears, small eyes, and short messy hair. He didn't know how old he was. He hadn't been washed, he was wearing a loose robe, and there was something like metal powder on his chubby face.

This one is Lou Gao, the master craftsman.

"I heard that you have made improvements to the Zero Character Battle Armor, I hope you will not disappoint me."

Although Yang Ming's tone was very light, Lou Gao did not dare to take it lightly. He also knew very well that the Zhatian Gang is about to launch an all-out war to unify the Douluo Continent. Arming all the gang members will greatly enhance the combat effectiveness of the Zhatian Gang, and at the same time increase the winning rate of this war.

Lou Gao looked serious and said seriously:

"Clan leader, please rest assured, the old man has always been a person who says one thing and says another, and absolutely dare not deceive anyone."

After finishing speaking, Lou Gao turned his body sideways, stretched out his hand and made a gesture of invitation, and said:
"Banglord, please come with me."

"Ah."

Yang Ming stepped out steadily with his hands behind his back.

Different from the workshop environment imagined by the outside world, Xuanwutang has set strict and even harsh standards. Blacksmiths and workers working here must maintain good personal hygiene, bathe frequently, change clothes, and cut hair. Nail polish is also prohibited, and personal items and accessories unrelated to production are not allowed to be brought into the workshop. Everyone must be fully disinfected before entering the workshop. Eating, smoking and spitting are strictly prohibited in the production area of ​​the workshop.

At the same time, the waste in the workshop and other places must be cleared at any time, and it must be cleaned out of the factory in time. The container and place where the waste is stored should be cleaned and disinfected in time. Ditches should be disinfected when necessary. No sundries should be piled up on the ground, and large-scale water accumulation should not occur. Regular pest control should be carried out around the workshop to prevent the breeding of pests. When using pesticides in the workshop, try to avoid polluting the equipment. Tools and containers should be thoroughly cleaned after using pesticides to remove residual pesticides. Windows should be opened for a long time in the workshop to ensure indoor air circulation and bright light. Tables and floors should be cleaned regularly to ensure a clean and hygienic production environment. Workbenches should not be placed Any sundries that are not related to production, spare parts should be classified and placed, and finished products, semi-finished products and spare parts should be classified and boxed or covered in time after the operation is completed...

Under such strict standards, no one dares to relax. The whole workshop is spacious and bright, the floor is clean and bright, the air is fresh and fresh, and everyone is dressed neatly and cleanly.

While inspecting the workshop, Yang Ming nodded secretly, very satisfied with all this.

Yang Ming followed Lou Gao to his exclusive forging platform, and looked up and down for a moment.

This is a gas furnace forging platform. The trolley adopts anti-collision sealing bricks, and the furnace door adopts a spring-type compression mechanism, which automatically seals the trolley and furnace door. It is integrated with rails and does not require foundation installation. It can be placed on a level ground. use.It is mainly used for quenching, annealing, aging and heat treatment of various mechanical parts such as high chromium and high manganese steel castings, ductile iron, rolls, steel balls and stainless steel.

The large chord on the top of the furnace of the gas furnace forging table adopts the form of a large partial arch, which is beneficial for the flame to enter the furnace rapidly from the burner along the tangential direction and burn strongly, which can avoid the formation of dead angles in the furnace, strengthen heat exchange, and make the furnace temperature Uniform distribution can keep the temperature of the inner wall of the furnace at about 1350 degrees Celsius.

There are already some raw materials prepared by Lou Gao on the forging table of the gas furnace, and there are design drawings beside it.

As soon as he arrived at Lougao's professional field, the little old man suddenly became extremely serious and focused. He didn't even bother to greet Yang Ming. He started to use the gas furnace forging table to do some simple metal refining work and started to make some simple parts.

On Lou Gao's body, one can vaguely see the working style of the older generation of blacksmiths.

They don't trust the parts forged by other people. Even if the assembly line can improve work efficiency, Lou Gao is still unwilling to use the things forged by others. He forges them all by himself. It seems that doing so can give his own works Give the soul.

Yang Ming doesn't comment too much on this. In the history of his last life, it has long been proved that this method is ignorant and backward, and will eventually be eliminated by mechanized mass production. They will go to the same assembly line production.

"Ding ding dong! jingling dong!"

Lou Gao's work is in full swing, and I'm afraid it will take a while.

Yang Ming picked up the design drawings on the forging table of the gas furnace and observed it carefully, a trace of surprise flashed in his eyes.

It has to be said that Lou Gao's title of Master Craftsman is not for nothing, he really has something, although he still has the ignorance from the old times, but his talent lies in this thin design blueprint It is vividly reflected.

(End of this chapter)