I really don't want to be a system

After Chao Chen recycled all the broken bronze saws to the 'smelter' for remaking, he originally planned to make a hammer with these scraps.

But if you think about it carefully, the ratio of saws and hammers is not the same, so after these scraps are returned to the furnace for remaking, they still have to make saws.

However, he didn't start refining right away, but found a few broken saws and reprocessed two square wooden boxes, one large and one small, as accurate measuring tools.

The big wooden box is outside, when the time comes, put the reconciled yellow mud inside, and then press the small wooden box inside~
Simple and convenient~~
In the end, it was still the same size~~
Chen Chao was very satisfied with the two new molds he made. After admiring them alone for a while, he handed them over to the head of pottery department, Duoyan, and asked him to take these two square boxes and burn a batch of molds. come out.

By the way, I will bring people to get a batch of pottery pots and bowls. Recently, with so many people joining, the tableware in the tribe is a bit insufficient.

As for why you don't use pottery bowls as measuring tools...

Emmmm......

This question is actually a little tricky...

Because every clay pot and bowl in the tribe is purely handmade, there are bound to be some large or small differences.

This also determines that it is difficult to find several identical ceramic bowls among them, and it also determines that it is difficult for them to passively enter the peak of bowl life—that is, to upgrade as a mold.

And the molds/molds used now are all disposable.If you want to take out the things inside, you have to break the fan/mold wrapped outside, so it is best to have a batch of things that can make molds repeatedly.

The thing Chen Chao chose to make molds repeatedly was wood.

But this time I can only find a way to get the mold of the measuring tool first, because a certain system boss didn’t think that he would fail before, so he didn’t have anything to deal with other wood molds—that is, a small knife that is convenient for cutting wood.

And those axes and knives before...

Chen Chao thought about them?of?Weird?

In essence, it can't be said to be a failure...

After all, this is my own world, I say they are axes, they are axes, I say they are knives...

They are knives...

A certain system boss silently comforted himself in his heart...

And secretly made up his mind, people, if you want to do something, you must do it best...

So we still need to make a small knife first, and then come to a batch of serious fans/molds~

This time he came to a one-time success~~

Isn't it just the hammer~~

Isn't it just a little bit of effort~~
What's so hard about this!
Can it be rare to defeat the boss of this system? ~~

As for the fan/mold for the bronze pot...

The most up-to-date and the best-looking bronze pot, since there is no problem, it is best to use the two newly made ones as a fan/mold~~
By the way, let the people of the tribe see if there are any larger leaves nearby, and then put them on the bottom of the pot and in the pot, so as not to be difficult to remove from the mold~~

No way duck!

We have to wait until spring, summer and autumn to go out to collect beeswax. It is not too difficult to find ducks now!

So~~

The lost wax method is still not ready for it~~
The head of a certain system is spinning rapidly for the future of the Tiantian tribe, while the head of the pottery department, the head of the pottery department and the one-eyed one who lost the wooden stick and the blower next to him, still reluctantly look at the two stones in front of him. A furnace with golden flowers.

Taking one step at a time and turning back three times, in the end, in grief, I took the two square wooden blocks and two beloved bronze pots given by Chen Chao, and returned to the pottery department.

With his subordinates, he went back to his job—making pottery pots, pottery bowls, and moulds.

And because a certain system leader wants to upgrade and forge this skill for himself, he can only stay in the 'smelting field'.

He re-burned the recycled bronze waste, and then poured it into the spare mold left over from the previous knives, ready to start his first practice.

Fortunately, the batch of molds I got before were all made of pottery mud, and I didn't use fire. I just let it dry and used it directly.

Because it is simple and convenient, Chen Chao has done a lot, and this time there are still a few practice hands left, which are knives, axes, and saws.

The ax can't be done anymore, the ratio is different, and it's too expensive.

Although the ratio of knives and saws is different, the difference is not very big, and it is mainly used as a test product for forging, so you can try it.

In addition, a certain system boss learned after inquiry (crossing out) that forging bronze is time-consuming and laborious, so many bronze products are cast products.

However, because the cast product has not been hammered, the microstructure is not tight enough. In addition, a large number of pores will be generated during the casting process, which further destroys the integrity of the structure.

Therefore, castings are mainly some handicrafts, sacrificial supplies and daily necessities, which are not suitable for the manufacture of weapons and other products with high physical performance requirements.

This is why the bronze pot can be used normally, but the knives, saws and axes that must be more demanding, the use effect will become worse visible to the naked eye.

In addition, even forged bronze is not perfect.Although adding tin can improve the hardness of bronze.

But this increase in hardness comes at the cost of reducing toughness. Like glass, it is easily broken in violent collisions, which is a fatal flaw for armored weapons.

The armor skills on the development tree haven't been lit up yet, so there's no rush to study them.

However, the weapon is being lit.

So when a certain system boss saw this paragraph, he only realized later that the damage to the bronze saw this time was most likely caused by man-made!
A certain system leader can think that those in the timber factory must not have broken the saw because of sawing wood
It's damage caused by having two saws hit each other a little bit for some reason

Otherwise, why didn't the wood that was sawed all day yesterday not be broken?

Why did it break if I didn't look at it today?
As for the remaining one, it is probably the managers of the two timber factories. Seeing that the newly issued tools were accidentally broken, I feel that I can't explain it...

So the remaining good saw also suffered misfortune...

So in essence, the bronze saws that watched the sky eat a lot of success this time, and their damage was mainly due to man-made disasters...

After the matter was clarified, Chen Chao started to forge bronze for the first time.After returning the previous recycled bronze saw to its essence, it was poured into the fan/mold of the knife.

Looking at the bronze liquid inside the fan/mould, a certain system boss suddenly encountered a problem...

I know it needs to be forged, but it...

How to forge?

Did I wait for it to cool down before giving it a few hundred hammers?
Or is it like forging an iron sword?Want to forge while quenching?
Is that when it is cold or when it is hot or when it is warm?

Difficult to do...

First of all, the option of quenching was ruled out by Chen Chao, because what he got back was tin bronze, not aluminum bronze, nor beryllium bronze.

And if you hit it with a stone after it is completely cool, wouldn't it be hit by a hard object, and it would break when you hit it?
Therefore, after some serious thinking, a certain system leader successfully got stuck on the question of how to forge a bronze knife.

You can't fight when it's cold, and the road of quenching won't work...

It's really difficult...

After Chen Chao waited for the molten copper to solidify and cool, he smashed the outer fan/mold directly, and took out the inner bronze casting—the knife.

He looked at the bronze knife in his hand, and began to try to hammer lightly with the thick side of the stone axe. Seeing that there was no damage as expected, he began to increase the force.

And the blower team next to them - Zhi and Zhong, looked at their deputy leader curiously.

Since they started burning stones, everything the deputy leader did made them feel very strange, and they felt that they couldn't understand what was going on in the deputy leader's mind.

But after the thing was done, the result shocked them again.

They didn't understand how the fire in the kiln would get bigger and bigger just by rubbing the small wooden sticks in their hands.

They also don't understand, how can there be stones that can burn liquid, can all stones burn water?

Then stir the water, stir it, and pour it into the mud, and it can turn into stones of other colors.

And these stones of other colors, you can also turn them into whatever you want them to look like.