Shenhao prodigal system

It's a clay model.

This is a bit complicated to say, but in simple terms, it is equivalent to a car model made of plasticine, but the ratio is required to be 1:1, and all details must be exactly the same as the design drawings.

This step needs to hire at least a team of five people to do it.

Engineers then use this model to study engineering feasibility.

After all, there may be omissions when looking at the pictures on the computer, but it looks much better when looking at the 1:1 model.

The feasibility is that no matter how cool the design of your car is, we must be able to produce it!If it can't be produced, it's completely pointless.

And this production is not only about whether it can be completed or not.

Also consider cost performance.

Your front bumper is very cool.

But other people's bumpers only cost 800 yuan. According to your requirements, each bumper costs 8000 yuan.

Can it be produced?

That must not be the case!

Your fenders are well designed!

But the key point is that during installation, this fender needs to waste 1 man-hour, and the fender of other people's house "clicks" to go up, and 0.3 man-hours are not needed.

What do you think.

Can it work?
In this step, we should consider not only whether it can be realized, whether it can be mass-produced, but also the cost.

At this time, various engineers are needed, including the intervention of procurement engineers.

Of course, the automotive engineer in the second step can also come here and continue to use it to play a role, but there is a high probability that there will be a new car that needs his access.

So for this step, at least five people must be recruited.

After modifying all the shapes that may affect the engineering design and subsequent assembly, the shape of the car is considered complete.

The stylist breathed a sigh of relief, and what followed was a chaotic battle among the engineers.

The process engineer will say that this sheet metal part is too difficult to make.

Parts engineers will say, Ganlin brewed, control the cost!
The interior engineer started cursing, your engine has encroached on the space in my interior.

The electrical engineer scolded, I am not rich in special code space!
In the end, the chief layout engineer was there to make a mess, oops, you give in, and you give in a little.

This kind of melee is at least a 30-person team melee.

Finally, it is finished with slime and dried.

Purchasing engineers to purchase parts!
The number of parts and tens of thousands of parts on the car body, do you rely on a procurement engineer?

Then there are two kinds of results.

First, he was exhausted.

The second type is that he completely frees himself and doesn't care about anything. Whoever gives the most kickbacks will use whoever's.

Generally, automobile factories use at least two procurement teams, commonly known as AB teams, which have a relationship of competition and mutual supervision.

Even some large automobile factories have dozens of procurement teams alone.

One AB team for the headlight purchase, one for the screw...

Anyway, there are many.

After the first batch of parts is purchased, the trial vehicle can be built. Generally, the trial vehicle will produce a dozen to dozens or even hundreds of vehicles.

The significance of trial fitting is to find problems and then solve them.

It's always shallow on paper.

Many problems, if you don't assemble the car yourself, you can't find the problem at all.

In the past, there was a car with Peugeot, and there was a bolt in the engine compartment that was difficult to install. It was not found in the previous processes, and it was not found until the test assembly.

Because this position is relatively narrow, if you want to modify it, you have to overthrow more than 50.00% of the previous work and do it again.

But there is no way, it must be modified.

Because if you don't change it, when it comes to the production process, the original process on the assembly line only takes 5 minutes, and it turns out that you have to add 3 minutes for your bolt. How much time will be wasted if you accumulate it over time?

So it has to be changed.

Fortunately, it was discovered during the trial assembly of the car. It would be a tragedy if it was discovered after mass production.

In the trial installation stage, people are also needed to review and improve these two processes.

And these are what Gu Bai needs to recruit now, because these processes and these people will be involved within three months.

Instead of recruiting at that time and leaving immeasurable factors, it is better to recruit now and maintain the satisfaction.

By the way, test engineers are also needed.

Many people should have seen a zebra-like car with the entire car pasted with ribbon paper on the road, that is the car for the road test.

The main thing is to test performance and durability.

This step is simple and simple, that is, drive the car, and then send it to the car factory every day based on your subjective feelings and the data collected by the computer for their improvement.

But hard work, really hard work.

Because the test engineer needs to drive the prototype car all over the world, and spend a whole winter and summer.

In winter, in the northernmost Heihe, we will test the condition of the car at minus [-] degrees.

In summer, it is necessary to test the condition of the car in the weather of [-] degrees above zero in Hainan.

[-] to [-] kilometers a month is trivial.

And sometimes it has to run tens of thousands of kilometers continuously on various shitty roads to simulate the situation of users after running hundreds of thousands of kilometers.

This step is not a coincidence, it must take time to do.

Because to spend a complete winter and summer, the fastest and fastest time is half a year.

This step is completed, and the various tests of the car are completed.

The next step is that process engineers start to match the assembly line and study the production and assembly steps.

At this time, a large number of recruited workers are needed.

So Gu Bai will not be involved in these three months.

Gu Bai calculated that the number of recruits should be around 50.

Gu Bai directly called Sun Minghui: "Old Sun, come to my office!"

"Okay! I'll be there soon!"

Sun Minghui is coordinating the work among various departments outside. This is his main work during this period. After all, car manufacturing is a matter of multi-departmental cooperation.

Only when the relationship between various departments is harmonious can the car be manufactured.

His current job is a lubricant job.

very important.

After a while, there was a knock on the door.

"Enter!"

It was Zhang Wenwen who opened the door and came in. She poked her head in and whispered, "Gu Dong, Mr. Sun is here!"

Sun Minghui's level is general manager.

Gu Bai said: "Let him in!"

"it is good!"

The door opened, and Sun Minghui came in. He said enthusiastically, "Gu Dong!"

Gu Bai pointed to the sofa: "Sit! What would you like to drink?"

"Just drink water, I've been getting angry recently!" Sun Minghui laughed.

Without Gu Bai doing it, Zhang Wenwen went to serve tea and pour water.

Gu Bai smiled and said: "It's work, take your time, don't worry! Don't worry, I have enough money!"

Sun Minghui said with a smile: "I'm not young anymore, Gu Dong, you are not in a hurry, but I am in a hurry, I am in a hurry to make achievements! I don't want to delay even a second!"

Gu Bai said: "The salary that should be paid to you is not a lot, why are you in such a hurry?"

Sun Minghui smiled and explained: "Maybe it has something to do with my personality! But the point is, think about it, I'm almost 40, I'm far away from home, my wife and children are not around, I must want to make some achievements , otherwise, what is the purpose of a person of my age coming out to make a living?"